Zdmak Set of two tools including Double Waterpump Tool. Used to remove waterpump on models with temperature dependent viscosity drive fan.
Appl: M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M/N/S62. M70, M73, S14, S38, S50B30, S50B32, S54.
IMPORTANT: The nut on the fan has left handed threads. If you try to use the fan-pulley holder backwards (incorrectly) it could probably break. If you use it correctly, it will not break.
This special tool covers most popular applications
Used for securing Water Pump Hub from rotating during R & R of Fan Clutch Nut. Should be used in conjunction with a 32mm or a 36mm thin wrench.
Plus Long Pattern Thin Wrench
Open end Size 32mm , Overall length of 15 inches. Thickness of wrench is
You get both tools with this purchase.
Please note: This tool is made for OEM parts, ie: waterpump, waterpump pulley and the fasteners. If any of these parts have been replaced on the vehicle you are working on, there may be some variances or differing in tolerances. A slight modification to the DOUBLE HOLDER TOOL may be needed. If you are not prepared to modify this item please do not purchase this product. We have great success with these special holder tools for BMW (we are the first to bring these items to the world wide web) and it is very rare when a modification is needed, but you might find that you may need to do this.