vw special tool SARASOTA vw special tool mercedes special tool -- mmk4mkt

Special Rivet Tool 0.00
Special Rivet Tool
Plier with 90 degree rotating head.
Tool used to remove two piece reusable plastic rivets
found on door panels, engine shields, wheel well shields etc.
For undivided rivets the Plier can also be used for cutting the head off the rivet.
Easy to use universal Plier eliminates damage to trim and door facings.
read more:

Holding Tool and Wrench Set 49.99

Set of 3 Includes:
Double Waterpump Tool*
This special tool covers most popular applications
Used for securing Water Pump Hub from rotating during R & R of Fan Clutch Nut
Applicable:M10, M20, M30, M40, M41, M42, M50, M60, M62

Plus
2 Long Pattern Thin Wrenches
German Car Special Tools
One of each size: 36mm and 32mm
Overall length of 15 inches.
Thickness of each wrench is 8mm.

Ferrari Head Bolt Tool 44.00
Special 8 Point
Offset ring Wrench for Headbolts.
Available 15mm or 17mm both come 1/2 inch drive.
The overall length of the tool will be 274mm.
read more:

Special Tool for Subaru 35.50

Special Tool for Subarus with 5mm square drive valve adjustment screws with a 12mm jam nut. This two in one tool features a window in the 12mm socket so the technician can see the position of the 5mm socket while it holds the adjustment screw as the 12mm jam nut is tightened. The handle pivots from one side to the other, so the window is always possible.

Special Hook 3370 29.99
Factory Tool 3370
Made in Germany.
TOOL USED TO REMOVE FRONT SEAT BACK REST PANEL ON AUDI A4.
read more:

27mm Special Socket 82.98

27mm Special Tool Made in Germany
12 Point Open Socket (1/2 Drive size) Tool used for injection nozzles on BMW Diesel
E30=324TD
E28=524TD
E34=524TD
M51=E36=325TD
E34=525TDS
This Tool is very hard to find and the German Hazet quality cant bebeat. You can find all the other sizes but a 27mm is very difficult to locatewhen you are in a pinch. Ref BMW 135320

Mercedes Special Tool 00

Special Tool for MERCEDES Star.
Chrome plated,with T handle made of black plastic,for mounting and removing theMercedes Star at the engine hood
on class S (W 140), E(W 124 since model 93) and C (W 202)

Set 3 Valve Tools 105.50
VALVE ADJUSTING TOOL SET OF 3
Valve adjusting on the Rabbit, Scirocco, and Jetta 1 requires the use of a special tool to hold the cam followers in the down position in order to remove the shims for replacement. The valve adjusting pliers are then used to remove the shim. Note: The 1.6 and 1.7 liter engines use a different tool than the 1.8 liter engine becuase of valve spacing. The Shim Set works on all solid lifter cylinder heads.
read more:

Set of Two Terminal Tools 29.50

Special Electrical Tools Terminal Tools Set of 2
Special Electrical Tool Terminal Tool Eliminate Damaged wires and Terminals. Wire Terminal tools are designed to remove wires from terminals without damage to either. The prongs depress the "barbs" on conventional terminals.

Radio Removal Tool Special 15.99

Very popular BMW Radio Removal Tool.Pentagon shaped tool with 5 Sides.The overall length of this tool is 3 5/8 inches.Applicable: Most BMWs.Including E38 E39 7 Series etc...This tool is used to release anti theft radio mounts.
Plus you get a 15 Piece Ratchet and Bit SetIncludes 6 each 1/4 drive 6 point sockets sizes 3/16, 1/4, 5/16 plus 6, 7, and 8mm.Also included are 6 screwdriver bits 2 slotted ( 3/16 and 1/4) 3 Phillips (1, 2 and 3) plus a 1/4 Dr Hex adapter.You can use the 6, 7 and 8mm hex sockets for hose clamps on German cars and many other applications.Set comes in a blow molded carrying case.

Knipex 4 in One Plier 34.99
Dont have this tool???
You need to git one!
Crimping and Stripping Pliers
Four functions in one tool!
Grip, strip, cut and crimp!
. Crimps cable links
. Strips 10/12/14 AWG wire
. Factory tested for copper / aluminum cable and hard wire
. Made of high strength special grade steel
. Plastic coated handles and polished head
. 6 1/4" overall length
read more:

Double Holder Tool 24.50

Double Waterpump Tool*
This special tool covers most popular applications
Used for securing Water Pump Hub from rotating during R & R of Fan Clutch Nut
BMW engines:M10, S14, M20, M21, M30, S38, M40, M41
M42, M43, M44, M50, M52, M60, M62, S50
Should be used in conjunction with a 32mm or a 36mm thin wrench.

Special Pliers 65.00

Special Pliers for outside Mirror switch
Original tool Made in Germany

Headbolt & Drain Plug Socket Set 28.00

TWO TOOLS!!!
Audi Headbolt Tool (LEFT)Number T10070 Headbolt Tool 1/2 Drive Used to remove and install cylinder headbolts. Volkswagen Audi V6 and 4 Cylinder 5 valve engines. Long pattern for deep located screws. Drive size is 1/2 inch. Many Audi Headbolts have switched to the new pattern. This will fit into the new special screw profile. Plus Drain Plug Socket (right)Special Tamperproof Transmission Drain Plug Socket.Triple Square (12 Point XZN)Same as Volkswagen Tool 3357.For Porsche Boxster and Audi A4, A6 and Passat. Dont hesitate...these are BOTH the CORRECT tools for the job!

ZDMAK SPECIAL 2 Brake Tools 49.95

This sale is for two brake tools.
First tool on the UPPER LEFT is Drift Pin 4mm
Tool used for removing disc brake pads.
This Drift pin is designed to press the brake pad retaining pins back w/o damage to pin or caliper.
For a variety of brake applications. (overall length is 7 inches.)

Second tool LOWER RIGHT is the Spreader/Disc Brake Piston Reset Tool
This is a very useful tool for safe resetting of disc brake pistons on vehicles with fixed caliper disc brakes.

Audi Headbolt Tool 17.50

This is the tool you are looking for!
Plus it is on sale!
Number T10070 Headbolt Tool 1/2 Drive
Used to remove and install cylinder headbolts.
Volkswagen Audi V6 and 4 Cylinder 5 valve engines. Long pattern for deep located screws. Drive size is 1/2"Dont be stuck using the wrong tool for this application. T10070 is the correct current VW Audi number for this socketThe old tool number was 3452 and is now discontinued..Many Audi Headbolts have switched to the new pattern.This will fit into the new special screw profile.The German Tool Books call this a Polydrive.This is NOT a Torx socket although it is a 6 point tool.The points are more flat (squared off) than a torx.and it is NOT a XZN (tri square) Socket.

Holding Tool & 32mm Wrench 39.99

Set of two tools for BMW Repair Includes:
Double Waterpump Tool. This special tool covers most popular applications
Used for securing Water Pump Hub from rotating during R & R of Fan Clutch NutApplicable:M10, S14, M20, M21, M30, S38, M40, M41M42, M43, M44, M50, M52, M60, M62, S50

Plus Long Pattern "Thin Wrench" 32mm Open End.
What makes this set different from other sets you will see is the 32mm wrench. This is a heavy duty tool and 20 inches long.
No one else has a set like this for the price. The 32mm is a WHOPPER.

Holding Tool and 36mm Wrench 39.99

SET OF 2 Includes:
* Double Waterpump Tool*
This special tool covers most popular applications
Used for securing Water Pump Hub from rotating during R & R of Fan Clutch Nut
Applicable:M10, M20, M30, M40, M41, M42, M50, M60, M62

Plus
Long Pattern Thin Wrench

Size: 36mm Open End.

BMW Daily Double 27.50

Daily Double!
Two Tools
Including Item Number BMW3022: Radio Removal Tool.Pentagon shaped tool with 3 5/8 inches overall length.Applicable: Most BMWs.This Five sided driver is used to release anti theft radio mounts.
Plus the two sided counter holder. More details about this tool number BMW 1703 Waterpump Tool
This special tool covers most popular applicationsUsed for securing Water Pump Hub from rotating during R & R of Fan Clutch NutApplicable:M10, M20, M30, M40, M41, M42, M50, M52, M60, M62 (1703 should be used in conjunction with a 32mm or a 36mm thin wrench). Picture is not to scale.

Super Duty Headbolt Tool 37.50

Headbolt Tool ....Read:
Same as Number T10070
Super Strong Headbolt Tool 1/2 Drive
(notice the solid one piece design)
Tool used to remove and install cylinder headbolts. New "Stronger" One Piece design. Volkswagen Audi V6 and 4 Cylinder 5 valve engines. Long pattern for deep located screws. Drive size is 1/2" Dont be stuck using the wrong tool for this application. T10070 is the correct current VW Audi number for this socket The old tool number was 3452 and is now discontinued.. Many Audi Headbolts have switched to the new pattern. This will fit into the new special screw profile. The German Tool Books call this a Polydrive. This is NOT a Torx socket although it is a 6 point tool. The points are more flat (squared off) than a torx. and it is NOT a XZN (tri square) Socket.

Terminal Tool Wire Remover 13.99
Special Electrical Tools Terminal Tool Eliminate Damaged wires and Terminals.
Wire Terminal tools are designed to remove wires from terminals without damage to either. The prongs depress the "barbs" on conventional terminals. See set of 2 below.
read more:

Headbolt Socket 17.50

This is the tool you are looking for.
Plus it is on sale!
Number T10070 Headbolt Tool 1/2 Drive
Used to remove and install cylinder headbolts.
Volkswagen Audi V6 and 4 Cylinder 5 valve engines. Long pattern for deep located screws. Drive size is 1/2"Dont be stuck using the wrong tool for this application. T10070 is the correct current VW Audi number for this socketThe old tool number was 3452 and is now discontinued..Many Audi Headbolts have switched to the new pattern.This will fit into the new special screw profile.The German Tool Books call this a Polydrive.This is NOT a Torx socket although it is a 6 point tool.The points are more flat (squared off) than a torx.and it is NOT a XZN (tri square) Socket.

New Style Headbolt Polydrive 17.50

This is the tool you are looking for!
Plus it is on sale!
Number T10070 Headbolt Tool 1/2 Drive
Used to remove and install cylinder headbolts.
Volkswagen AudiV6 and 4 Cylinder5 valve engines. Long pattern for deep located screws. Drive size is 1/2"Dont be stuck using the wrong tool for this application. T10070 is the correct current VW Audi number for this socketThe old tool number was 3452 and is now discontinued..Many Audi Headbolts have switched to the new pattern.This will fit into the new special screw profile.The German Tool Books call this a Polydrive.This is NOT a Torx socket although it is a 6 point tool.The points are more flat (squared off) than a torx.and it is NOT a XZN (tri square) Socket.

Audi Headbolt Toolt 17.50

Oil Service Wrench 14x17 39.50
Oil Wrench 3677This is a special tool is designed for changing oil. The Male hex key is 14mm and the female ( box end ) is 17mm. Made in Germany by Stahlwille.
read more:

Thin Nose Type Special Wrench 19.99
Attention Harley People
(or anyone looking for a very unique tool)
This is a 'must have' tool for your tool pouch! It is only 8 1/4 inches long, light weight and strong. The jaws open large enough to handle any Harley axle nut, a full 1 1/2 inch. It is 1/4 inch thinner than a standard adjustable wrench This wrench has a thickness of 1/2 inch; allowing you to take the rear tire off your scoot without removing the mufflers on an FL touring model. It has a very comfortable rubber grip with a hole in the end of the handle so you can hang it on the wall or attach a lanyard. Best of all it adjusts tight on the nut and the jaws will not flex when you reef on it. There is a metric scale on one side and an SAE scale on the other just in case you want to know the size of the nut. Do not loan this wrench to a friend, you might not get it back!ClickHere to see the tool in action!
read more:

Ferrari Head Bolt Tool 00

Special 8 Point
Offset ring Wrench for Headbolts.
Available 15mm or 17mm both come 1/2 inch drive.
The overall length of the tool will be 274mm.

Brake Piston Tool 14.99

Disc Brake Piston Cube Tool has 5 different drive pin configurations designed to rotate the parking brake activated piston back into the caliper cylinder when replacing worn pads on vehicles equipped with 4 wheel disc brakes. Tool will service many domestic and import cars. This tool will work in place of special tool 3272. Some Audi VW calipers (mid 80s) use a hex tool check yours to be certain a pain in the neck if you have never done them before. Grind or file off two diagonally opposite corner pins to allow the cube to fit the vw rear brake piston. Use with a 3/8" ratchet. It can be easier to fasten the rear caliper back onto the carrier without the rotor in place while using this tool. That way you get a little extra leverage. Use as follows: engage the two prongs and turn the piston 180 clockwise. Remove the tool. Use a generic calper tool or a c clamp and push the piston in about 2mm. Keep alternating back and forth between the cube tool and the c clamp until the piston in almost all the way in. If you are strong enough, you may not even need the c clamp just push with the cube tool as you turn. Instead of the cube, you can even use needle nose pliers, but then you defintiely need the c clamp. The rear brakes can be rather difficult, so make sure you have plenty of time. Also for use on most popular imports and Chrysler, Ford and GM vehicles with 4 wheel disc brakes.

Special Hook 3370 30.00

Factory Tool 3370
Made in Germany.
TOOL USED TO REMOVE FRONT SEAT BACK REST PANEL ON AUDI A4.

Triple Square Drain Plug Tool 49.50

This is a Special Tamperproof * Transmission Drain Plug Socket. Triple Square ( 12 Point XZN 16) Same as old Volkswagen Tool 3357. (Number 3357 is still found in many/most manuals for this job)
Applicable Porsche Boxster and Audi A4 A6 and Passat. This is an excellent high quality tool Made in Germany. Plug not included, picture is for reference only.

LED Tester 53.99

NUMBER VAG1527BLED Tester Factory Tool VAG1527B Special Tool for diagnostic troubleshooting.3 to 48V range.

Hazet Tensioning Tool 75.98

Driving Tool for Tensioning Device
special steel, for operating devicewhen changing the V ribbed belt,especially on VW Polo, Golf and Passat, AUDI since 1991.

Oil Service Wrench 14 x 17 52.50

Oil Wrench 14 x 17
Special tool designed for oil service.
The Male hex key is 14mm and the female ( box end ) is 17mm.
High Quality Tool
Made in Germany.

Special Socket 46.50

Tamperproof Tool used for removal and replacement of windscreen wiper arm and adjusting the pressure on BMW.
The picture does not show it but this tool has a hole in the tip (tamperproof)
For E31, E38 AND E39 (THE NUT IS MOUNTED WITHIN THE WIPER ARM BEARING ASSEMBLY).

4 Tools for BMW 34.99

Lot of 4 Tools for BMW Repair You get all four tools pictured with thispurchase. The First item (clockwise top left to right) 
A. "Double Waterpump Tool" This special tool covers most popularapplications Used for securing Water Pump Hub from rotating during R & R ofFan Clutch Nut BMW engines:M10, S14, M20, M21, M30, S38, M40, M41, M42, M43,M44, M50, M52, M60, M62, S50
B. "Radio Removal Tool" Pentagon shaped tool with 5 Sides. Theoverall length of this tool is 3 5/8 inches. Appl: Most BMWs. Including E38 E397 Series etc This tool is used to release anti theft radio mounts.
C. "Flexible Shaft" Hex Nut Driver Size on this Nut Driver is 6mm Rubber coated flexible shaft Nut Drivers work well on hose clamps, hex headedscrews and nut screws.
D. "Extra Long 5/8 Spark Plug Socket" (16mm) Overall Length is 4 1/2 inches. 3/8 Drive . Knurled drive end plus rubber insert for better grip.

Bmw Headbolt Tool 59.50

Torx Pattern Bmw Headbolt Tool.
MADE IN GERMANY by Hazet!
E12 Female Special Lock Ball Torx Socket for cylinder head screws.
Some applications include: M42, M43, M44, M50, M52, M60, M62.

Tensioning Device 12.95

Locking tensioning device for V Belt.Special tool T10060A superceded tool T10060

Ball Joint Tool Set 69.50

Set of two tools
First tool (top of image) pictured is a Universal tool is used to separate the ball joint from the spindle support arm. It works on many domestic and import front wheel drive vehicles, and is adjustable for diffrent size ball joints. Using the correct ball joint tool makes a tough job much easier. Factory ball joints are pressed in tight, if you damage the ball joint, the situation gets ugly.Two Stage Ball joint tool Special steel, galvanized, for removing the ball pivots of steering arms, stabilizers etc.
Plus Universal Ball joint Puller (18 22mm opening), light series, galvanized Specifications Once the puller is positioned on the pin by adjusting the central screw, the joint is removed by turning the side screw. You get both tools with this purchase.

Headbolt Tool Set 2 29.50

These are the tools you are looking for!
Plus they are on sale!
Headbolt Tools 1/2 Drive
Used to remove and install cylinder headbolts.
Volkswagen Audi
Long pattern for deep located screws. Drive size is 1/2"Dont be stuck using the wrong tools. Please read: The T10070 is the correct current VW Audi number for this new style tool.The old tool number was 3452 and is now discontinued.Many Audi Headbolts have switched to the new pattern.This will fit into the new special screw profile.The German Tool Books call this new style a Polydrive.

Plus you get Headbolt Tool Triple Square 12 Point (XZN) Socket M10Sturdy 1/2 Drive Tools used for a wide variety of applications including headbolts.Excellent for working on German vehicles.
This XZN tool is 5 1/2 inches long and the shaft is 4 inches.
Super set for removing & installing cylinder headbolts on both early and late model 1.8T and 2.0L gas engines. You will get both tools with this purchase.

Audi VW Headbolt Tool Set 2 29.50

These are the tools you are looking for!VW AUDI Headbolt Tools 1/2 Drive
Used to remove and install cylinder headbolts.
Volkswagen Audi
Long pattern for deep located screws. Drive size is 1/2"Dont be stuck using the wrong tools. Please read: The T10070 is the correct current VW Audi number for this new style tool.The old tool number was 3452 and is now discontinued.Many Audi Headbolts have switched to the new pattern.This will fit into the new special screw profile.The German Tool Books call this new style a Polydrive.

Plus you get Headbolt Tool Triple Square 12 Point (XZN) Socket M10Sturdy 1/2 Drive Tools used for a wide variety of applications including headbolts.Excellent for working on German vehicles.
This XZN tool is 5 1/2 inches long and the shaft is 4 inches.
Super set for removing & installing cylinder headbolts on both early and late model 1.8T and 2.0L gas engines. You will get both tools with this purchase.

Drainplug Tool on Sale! 14.99

Drain Plug Socket
This is a Special Tamperproof Transmission Drain Plug Socket.
Triple Square ( 12 Point XZN )
Same as Volkswagen Tool 3357.
For Porsche Boxster and Audi A4, A6 and Passat.

17 X 19mm Factory Tool 26.99

17 x 19mm Special Wrench
Factory Tool
Double Ended Ring Wrench
Made in Germany.
Used for removing and installing
pipe elbow on hydraulic pump
Model: 520, 525 2500 3.3L, 2800CS, 2800CSA, 3.0CS, 3.0CSA
Series E12, E21, E23, E24,
E28, E30, E31,
E32, E34, E36, E38, E39.

BMW Repair Tool 125.00

116180 FixtureAppl:M52, M52TU, M54 Details:Place chain wheels in special tool 116 180, position tooth gap in inlet chain wheel and feed on chain. For timing of the double Vanos cam adjustment for 1998 and later 6 cylinder BMW. Use it together with tools BMW113 240, BMW113290, BMW112300, BMW114220, BMW116150

Female / Male Extension 0.00
Special adapter tool with locking system, Female Male Extension. 1/2 inch Drive
Overall length is 184mm.
read more:

Set 2 Special Wrenches 48.00
Set of wrenches including a very nice 12 inch "Hammer Profile" Adjustable Wrench
Plus an 8 inch "Thin Nose Wide Mouth" Adjustable wrench.
Attention Harley Davidson People
(or anyone looking for a very unique tool)
The 8 inch THIN NOSE WRENCH is a 'must have' tool for your tool pouch! It is only 8 1/4 inches long, light weight and strong. The jaws open large enough to handle any Harley axle nut, a full 1 1/2 inch. It is 1/4 inch thinner than a standard adjustable wrench This wrench has a thickness of 1/2 inch; allowing you to take the rear tire off your scoot without removing the mufflers on an FL touring model. It has a very comfortable rubber grip with a hole in the end of the handle so you can hang it on the wall or attach a lanyard. Best of all it adjusts tight on the nut and the jaws will not flex when you reef on it. There is a metric scale on one side and an SAE scale on the other just in case you want to know the size of the nut. Do not loan this wrench to a friend, you might not get it back!ClickHere to see the tool in action!
read more:

T.D.C. Tool 0.00
Top Dead Center Tool
Number 2588 1 Belt Changing Tool.
Should be used with 2588 2 and 2588 3. Call for more info.
High Quality Tool Made in Germany.
read more:

Headbolt & Drain Plug Socket Set 2 28.00

Drain Plug Socket
Plus Heabolt Tool
Details: Tamperproof Transmission Drain Plug Socket.
Triple Square (12 Point XZN)
Same as Volkswagen Tool 3357.
For Porsche Boxster and Audi A4, A6 and Passat.

Plus Audi Headbolt Tool
Number T10070 Headbolt Tool 1/2 Drive Used to remove and install cylinder headbolts. Volkswagen Audi V6 and 4 Cylinder 5 valve engines. Long pattern for deep located screws. Drive size is 1/2 inch. Many Audi Headbolts have switched to the new pattern. This will fit into the new special screw profile. Set of 2 Audi Tools from ZDMAK

Dont hesitate...these are BOTH the CORRECT tools for the job!

Special Pliers 47.50
Special Pliers for Dashboard Lights.
Overall length is 140mm.
read more:

5mm Metric T Handle Hex 3.70

Metric T Handle Hex Tool
. Blades of Wiha Special CRM 72 Tool Steel, . Through Hardened, . Anti corrosion Nickel Finish . Ergonomic Comfort Grip T Handle . Shaped for Maximum Power & Comfort. Handle Molded over L Key for permanent bond.. Guaranteed Quality Made In Germany!

6mm Metric T Handle Hex 5.25

You Searched for

vw special tool

Trade Links With ZDMAK