volvo special tools SARASOTA volvo special tools oil filter wrench -- mmk4mkt

Set of Two Terminal Tools 29.50

Special Electrical Tools Terminal Tools Set of 2
Special Electrical Tool Terminal Tool Eliminate Damaged wires and Terminals. Wire Terminal tools are designed to remove wires from terminals without damage to either. The prongs depress the "barbs" on conventional terminals.

Volvo Clutch Tool 6.99

Volvo Clutch Alignment Tool (Diesel D24)Clutch tool is extremely durable long lasting and inexpensive. These tools can be used over and over again.A must for clutch repair shop, clutch specialist, transmission repair shops, automotive stores, school shop classes, clutch resellers, foreign and domestic repair shops.

Oil Filter Wrench 14.95

For removing the plastic housing on cartridge type oil filters
found on late model Volvos
Same as Volvo ref. number 999 5679.
Volvo V40, S40, S70, S80, V70, XC70, XC90, S60, 300, 400, C70 Conv
C70 Coupe etc..
Majority of newer Volvo Applications
86mm 16 Flute 3/8 Drive size.

2 Pins and 2 Plates 103.00

2 Pins and 2 Plates Set of four tools.VW Audi T.D.I. and New Beetle Cam Kit Reference numbers for the two tools on the left are: 3418 and 3359. Tool Set for factory correct and trouble free installations. This is a popular set for Diesel timing of Bosch injection pumps. This set has been developed for aligning the cam shaft with the Diesel pump on 1998 and newer VW models equipped with a T.D.I. engine. This two piece lock plate and alignment pin allows the technician for factory correct and trouble free installations.

Tools on the right side of image are Diesel Lock Plate / Cam Setting Bar Same as Volkswagen ref 2065a Tool used for securing the cam shaft from rotating and maintaining correct timing position engine AAZ during R&R of cam shaft drive belt. Applicable: VW/Audi diesel and Volvo 6 cylinder 2.4L diesel 1981 86 Lock Pin for Diesel (Same as VW tool 2064). Tool used for securing Bosch diesel injection pump sprocket from rotating during R&R of cam shaft drive belt. This Locking Pin also assists in locating the general timing position of pump. Volkswagen Audi diesel and Volvo 6 cylinder 2.4L diesel 1981 86 All 4 tools are High Quality Made in Europe!

Extractor Tool Kabelex 00

Ejection extractor tools for contacts MAN/Volvo, DaimlerChrysler, BMW, Porsche, Volkswagen, Audi: tools for flat plug in sockets with asymmetrically positioned latches in terminals with single release, with two release channels,etc..
ClickHere for More Kabelex information. Extractor tools for soldered contacts, for Micro Timer I, cable extractor tools for Micro Timer II, III, Pit Pod contacts, Maxi Power Timer , SLK contactsetc...

Stahlwille Quality Tools 00
Special Reversible 1/4 inch bit holding Ratchet.
Overall Length is 110mm.
read more:

Set of 5 with Indicator 123.99
"Grand Master"
Set of 5 Tools
Including Dial Indicator
Plus 3032 Injection Pump Tool
Puller used for the proper extraction of injection pump drive gear.
Applicable: Volvo and VW / Audi diesels Excluding TDI *
PLUS: VA6015 Used for accurate adjustment of Bosch diesel injection pump.
PLUS: 2065A Diesel Camshaft Locking Plate
PLUS: 2064 Pin.
read more:

Service Off Volvo 79.00

Turn off service and inspection indicator light.

Terminal Tool Wire Remover 13.99
Special Electrical Tools Terminal Tool Eliminate Damaged wires and Terminals.
Wire Terminal tools are designed to remove wires from terminals without damage to either. The prongs depress the "barbs" on conventional terminals. See set of 2 below.
read more:

Volvo Oil Seal Arbor 113.50

Arbor above used for the proper installation of oil sealon the flywheel side of the crankshaft.Applicable: Volvo engine B21, B23, B230.

M8, M10 and M12 Triple Square Set 3 39.99

Super Set!
Three Headbolt Tools Triple Square 12 Point (XZN) Sockets M8, M10 and M12
Sturdy 1/2 Drive Tools used for a wide variety of applications including headbolts.
Excellent for working on German vehicles.
Each tool is 5 1/2 inches overall and the shaft is 4 inches long!
Zdmak Special Set of 3 big 1/2 drive Tools!

Set of 4 with Indicator 63.50
"Baby Grand"
Set of 4 Tools
Including Dial Indicator
Plus VA6015 Diesel ToolUsed for accurate adjustment of Bosch diesel injection pump.This Dial Gauge Holder screws into the back of theinjection pump and comes equipped with a 10cm dial indicator extension pin. This tool is to be used in conjunction with a dial indicator.(not included).Applicable:All VW/Audi Diesel and Volvo 6 cylinder 2.4L diesel '81 '86 engines.
PLUS 2065A Diesel Cam Shaft Locking Plate
PLUS 2064 Pin.
read more:

T30 Torx Scredriver 5.99

Torx Screwdriver
For Torx T 30 Screws.
Special tool removes and installs Torx T 30 screws on BMW, Volvo etc..and other applications.

Best Quality Thin Wrench Set 68.50

Set of 2 Long Pattern Thin Wrenches
German Car Special *
One of each size: 36mm and 32mm
Overall length of 20 inches.
Thickness of each wrench is 8mm.Tools will come with a handle grip on each.
Many applications for these two tools.

Pin , Plate and Holder 51.99
Set of three tools including:VA6015 Diesel ToolUsed for accurate adjustment of Bosch diesel injection pump.This Dial Gauge Holder screws into the back of theinjection pump and comes equipped with a 10cm dial indicator extension pin. This tool is to be used in conjunction with a dial indicator.(not included).Applicable:All VW/Audi Diesel and Volvo 6 cylinder 2.4L diesel '81 '86 engines. PLUS 2065A Diesel Cam Shaft Locking Plate 2065aPLUS 2064 Locking Pin
read more:

Trailing Arm Bushing Tool Set 154.00

For efficient R&R of rear trailing arm bushings.Applicable: All Volvo 200 series.Please read: Also included in the price of this kit is the componentpictured (upper left) Item number V5079These two tools are sold together here as a set. This is a very good deal

Belt Tensioner Release Kit 29.99

V420 Belt Tensioner Release Tool Kit for Volvo
Includes locking pin to ease belt removal and installation.Appl.: Volvo 850 with female square drive in tensioner

Headbolt & Drain Plug Socket Set 28.00

TWO TOOLS!!!
Audi Headbolt Tool (LEFT)Number T10070 Headbolt Tool 1/2 Drive Used to remove and install cylinder headbolts. Volkswagen Audi V6 and 4 Cylinder 5 valve engines. Long pattern for deep located screws. Drive size is 1/2 inch. Many Audi Headbolts have switched to the new pattern. This will fit into the new special screw profile. Plus Drain Plug Socket (right)Special Tamperproof Transmission Drain Plug Socket.Triple Square (12 Point XZN)Same as Volkswagen Tool 3357.For Porsche Boxster and Audi A4, A6 and Passat. Dont hesitate...these are BOTH the CORRECT tools for the job!

Best Quality! Thin Wrench Set 68.50

Best Quality * Set of 2 Long Pattern Thin Wrenches
German Car Special *
One of each size: 36mm and 32mm
Overall length of 20 inches.
Thickness of each wrench is 8mm.Tools will come with a handle grip on each.
Many applications for these two tools.

Dial Indicator and Holder 98.50

Bosch Diesel Injection Pump
Timing Indicator Tools.
With High Quality Dial Indicator Made in Germany!
You will not find this price anywhere except Zdmak!
Tools are used for the accurate setting of
the Bosch diesel fuel injection pump timing.
The Holder screws into the back of the injection pump,
giving a dial indicator reading necessary for setting
the correct pump timing.
This set comes complete with the correct tools for the job!
Contents: Metric Dial Indicator Made in Germany,
plus holder plus the 10cm dial indicator extension pin,
making the timing easy to set,
as the timing has a range from 0.83mm to 1.15mm.
For use on VW and Audi diesels.
Also works with 1981 1986 Volvo 6 cyl 2.4L diesels,
1989 1994 Dodge 6 cyl 5.9L diesels.

FYI FOR PEOPLE WHO DECIDE "NOT" TO USE THIS SET
Here is some helpful info...Universal conversion factor for milimeters into decimal inches is .03937
EXAMPLE: 13mm X .03937= .5118"

Set 2 Power Lifter Pickup Tools 38.00
Set of 2 * Pick up Tools
One 19 inch long with lift cap 1.5lbs.
One 2 feet long with 3 lbs. capacity.

Please note: picture is for reference only.

Tools are also sold separately below.

read more:

Headbolt Tool Set 2 29.50

These are the tools you are looking for!
Plus they are on sale!
Headbolt Tools 1/2 Drive
Used to remove and install cylinder headbolts.
Volkswagen Audi
Long pattern for deep located screws. Drive size is 1/2"Dont be stuck using the wrong tools. Please read: The T10070 is the correct current VW Audi number for this new style tool.The old tool number was 3452 and is now discontinued.Many Audi Headbolts have switched to the new pattern.This will fit into the new special screw profile.The German Tool Books call this new style a Polydrive.

Plus you get Headbolt Tool Triple Square 12 Point (XZN) Socket M10Sturdy 1/2 Drive Tools used for a wide variety of applications including headbolts.Excellent for working on German vehicles.
This XZN tool is 5 1/2 inches long and the shaft is 4 inches.
Super set for removing & installing cylinder headbolts on both early and late model 1.8T and 2.0L gas engines. You will get both tools with this purchase.

Best Seller ! Radio Tools Set 24.99

This is one of the best sets on the market. This is a Master Set for BMW Mercedes Porsche VW Audi and DIN. Included is a total of 3 different sets Volkswagen Audi, two different tools for BMWand a set for Mercedes Porsche and a DIN Ford set. The VW Tools (4) Number T10057Audi A4, A6, A8 and New Beetle For Concert, Symphony I and Symphony II stereos. Also for Nav units in Trunk and for CD changers in Glove box. If you have 4 slots VW AUDI this is the 4 keys you need) Plus you get Number VW 3316 (2) Radio Removal Tools New Body Style Passat Jetta Golf . You will get virtually full coverage forVolkswagen Audi when you buy this master set. The BMW Radio Removal Tools areone Pentagon shaped tool with a 3 5/8 inches overall length. Applicable: Most BMWs. This Five sided driver is used to release anti theft radio mounts.You will also get the special rare small allen tool for BMW (upper left) Fornewer BMW E38 & E39 7 SERIES Plus Mercedes most coverage for newer and oldervehicles, especially 1992 and newer 129, 140, 163, 202 & 210 PLUS Range Rover with Becker Nav System.The MB Tools also work on Porsche. Appl: Turbo GT, GT2, GT3, Boxster, Cayenne 911, 996 , 987, Carrera etc. Same as Porsche ref: 000 721 957 01

Audi VW Headbolt Tool Set 2 29.50

These are the tools you are looking for!VW AUDI Headbolt Tools 1/2 Drive
Used to remove and install cylinder headbolts.
Volkswagen Audi
Long pattern for deep located screws. Drive size is 1/2"Dont be stuck using the wrong tools. Please read: The T10070 is the correct current VW Audi number for this new style tool.The old tool number was 3452 and is now discontinued.Many Audi Headbolts have switched to the new pattern.This will fit into the new special screw profile.The German Tool Books call this new style a Polydrive.

Plus you get Headbolt Tool Triple Square 12 Point (XZN) Socket M10Sturdy 1/2 Drive Tools used for a wide variety of applications including headbolts.Excellent for working on German vehicles.
This XZN tool is 5 1/2 inches long and the shaft is 4 inches.
Super set for removing & installing cylinder headbolts on both early and late model 1.8T and 2.0L gas engines. You will get both tools with this purchase.

21mm Socket 3/4 Drive 16.50

Big 3/4 inch Drive 21mm Socket 6 Point.
High Quality Tools
Made in Germany by Stahlwille!

Please note: some of the items in the Stahlwille section of this website are (non stock) special order. If you need to know immediate status on an item (or if you are unable to wait for a bckorder) please call or email before purchasing. If you do not see the size socket you are looking for contact Zdmak

Stahlwille sockets are made to exceed the standards of DIN 3124; they fit as tight as a glove and can withstand extreme torque loads. If you have never used German sockets on German fasteners, you will definitely notice a difference. No more sloshing around and rounding off heads of bolts. Stahlwille makes a wide variety of special tools that are ideal for working on German and other European automobiles, but they are equally useful for working on American and Japanese cars.

24mm Socket 1/2 Drive 12.52

1/2 inch Drive 24mm Socket 6 Point.
High Quality Tools
Made in Germany by Stahlwille!
Please note: some of the items in the Stahlwille section of this website are (non stock) special order. If you need to know immediate status on an item (or if you are unable to wait for a bckorder) please call or email before purchasing. If you do not see the size socket you are looking for contact Zdmak

Stahlwille sockets are made to exceed the standards of DIN 3124; they fit as tight as a glove and can withstand extreme torque loads. If you have never used German sockets on German fasteners, you will definitely notice a difference. No more sloshing around and rounding off heads of bolts. Stahlwille makes a wide variety of special tools that are ideal for working on German and other European automobiles, but they are equally useful for working on American and Japanese cars.

19mm Socket 3/4 Drive 15.50

Big 3/4 inch Drive 19mm Socket 6 Point.
High Quality Tools
Made in Germany by Stahlwille!

Please note: some of the items in the Stahlwille section of this website are (non stock) special order. If you need to know immediate status on an item (or if you are unable to wait for a bckorder) please call or email before purchasing. If you do not see the size socket you are looking for contact Zdmak

Stahlwille sockets are made to exceed the standards of DIN 3124; they fit as tight as a glove and can withstand extreme torque loads. If you have never used German sockets on German fasteners, you will definitely notice a difference. No more sloshing around and rounding off heads of bolts. Stahlwille makes a wide variety of special tools that are ideal for working on German and other European automobiles, but they are equally useful for working on American and Japanese cars.

23mm Socket 3/4 Drive 17.50

Big 3/4 inch Drive 23mm Socket 6 Point.
High Quality Tools
Made in Germany by Stahlwille!

Please note: some of the items in the Stahlwille section of this website are (non stock) special order. If you need to know immediate status on an item (or if you are unable to wait for a bckorder) please call or email before purchasing. If you do not see the size socket you are looking for contact Zdmak

Stahlwille sockets are made to exceed the standards of DIN 3124; they fit as tight as a glove and can withstand extreme torque loads.If you have never used German sockets on German fasteners, you will definitely notice a difference.No more sloshing around and rounding off heads of bolts. Stahlwille makes a wide variety of special tools that are ideal for working on German and other European automobiles, but they are equally useful for working on American and Japanese cars.

36mm Socket 3/4 Drive 26.60

Big 3/4 inch Drive 36mm Socket 6 Point.
High Quality Tools
Made in Germany by Stahlwille!

Please note: some of the items in the Stahlwille section of this website are (non stock) special order. If you need to know immediate status on an item (or if you are unable to wait for a bckorder) please call or email before purchasing. If you do not see the size socket you are looking for contact Zdmak

Stahlwille sockets are made to exceed the standards of DIN 3124; they fit as tight as a glove and can withstand extreme torque loads.If you have never used German sockets on German fasteners, you will definitely notice a difference.No more sloshing around and rounding off heads of bolts. Stahlwille makes a wide variety of special tools that are ideal for working on German and other European automobiles, but they are equally useful for working on American and Japanese cars.

22mm Socket 3/4 Drive 15.50

Big 3/4 inch Drive 22mm Socket 6 Point.
High Quality Tools
Made in Germany by Stahlwille!

Please note: some of the items in the Stahlwille section of this website are (non stock) special order. If you need to know immediate status on an item (or if you are unable to wait for a bckorder) please call or email before purchasing. If you do not see the size socket you are looking for contact Zdmak

Stahlwille sockets are made to exceed the standards of DIN 3124; they fit as tight as a glove and can withstand extreme torque loads.If you have never used German sockets on German fasteners, you will definitely notice a difference.No more sloshing around and rounding off heads of bolts. Stahlwille makes a wide variety of special tools that are ideal for working on German and other European automobiles, but they are equally useful for working on American and Japanese cars.

27mm Socket 3/4 Drive 19.99

Big 3/4 inch Drive 27mm Socket 6 Point.
High Quality Tools
Made in Germany by Stahlwille!

Please note: some of the items in the Stahlwille section of this website are (non stock) special order. If you need to know immediate status on an item (or if you are unable to wait for a bckorder) please call or email before purchasing. If you do not see the size socket you are looking for contact Zdmak

Stahlwille sockets are made to exceed the standards of DIN 3124; they fit as tight as a glove and can withstand extreme torque loads.If you have never used German sockets on German fasteners, you will definitely notice a difference.No more sloshing around and rounding off heads of bolts. Stahlwille makes a wide variety of special tools that are ideal for working on German and other European automobiles, but they are equally useful for working on American and Japanese cars.

24mm Socket 3/4 Drive 16.50

Big 3/4 inch Drive 24mm Socket 6 Point.
High Quality Tools
Made in Germany by Stahlwille!

Please note: some of the items in the Stahlwille section of this website are (non stock) special order. If you need to know immediate status on an item (or if you are unable to wait for a bckorder) please call or email before purchasing. If you do not see the size socket you are looking for contact Zdmak

Stahlwille sockets are made to exceed the standards of DIN 3124; they fit as tight as a glove and can withstand extreme torque loads.If you have never used German sockets on German fasteners, you will definitely notice a difference.No more sloshing around and rounding off heads of bolts. Stahlwille makes a wide variety of special tools that are ideal for working on German and other European automobiles, but they are equally useful for working on American and Japanese cars.

41mm Socket 3/4 Drive 40.00

Big 3/4 inch Drive 41mm Socket 6 Point.
High Quality Tools
Made in Germany by Stahlwille!

Please note: some of the items in the Stahlwille section of this website are (non stock) special order. If you need to know immediate status on an item (or if you are unable to wait for a bckorder) please call or email before purchasing. If you do not see the size socket you are looking for contact Zdmak

Stahlwille sockets are made to exceed the standards of DIN 3124; they fit as tight as a glove and can withstand extreme torque loads.If you have never used German sockets on German fasteners, you will definitely notice a difference.No more sloshing around and rounding off heads of bolts. Stahlwille makes a wide variety of special tools that are ideal for working on German and other European automobiles, but they are equally useful for working on American and Japanese cars.

30mm Socket 1/2 Drive 15.30

1/2 inch Drive 30mm Socket 6 Point.
High Quality Tools
Made in Germany by Stahlwille!

Please note: some of the items in the Stahlwille section of this website are (non stock) special order. If you need to know immediate status on an item (or if you are unable to wait for a bckorder) please call or email before purchasing. If you do not see the size socket you are looking for contact Zdmak

Stahlwille sockets are made to exceed the standards of DIN 3124; they fit as tight as a glove and can withstand extreme torque loads. If you have never used German sockets on German fasteners, you will definitely notice a difference. No more sloshing around and rounding off heads of bolts. Stahlwille makes a wide variety of special tools that are ideal for working on German and other European automobiles, but they are equally useful for working on American and Japanese cars.

Volvo Cam & Crankshaft Tool Kit 515.00

This set is designed to properly Secure and Align
the cam and crankshaftduring R and R of cylinder head assemblies
on (5) and (6) cyl engines.
Set is also for the proper installationof camshaft cover
to the engine head and useful when replacing camshaft seal.
Volvo Reference numbers: 9995454, 9995453,9995451,9995452.
Call me and I will fax you the details.
Applications include 700, 800, 850, 900, 960, C70 Coupe and Conv,
S40, S60, S70, S80, S90, V70 2000, V70XC, XC70, V90, XC90.

Holding Tool and Wrench Set 49.99

Set of 3 Includes:
Double Waterpump Tool*
This special tool covers most popular applications
Used for securing Water Pump Hub from rotating during R & R of Fan Clutch Nut
Applicable:M10, M20, M30, M40, M41, M42, M50, M60, M62

Plus
2 Long Pattern Thin Wrenches
German Car Special Tools
One of each size: 36mm and 32mm
Overall length of 15 inches.
Thickness of each wrench is 8mm.

26mm Extra Deep Socket 34.50

1/2 inch Drive 26mm Deep Socket 12 Point.
High Quality Tools
Made in Germany by Stahlwille!

Please note: some of the items in the Stahlwille section of this website are (non stock) special order. If you need to know immediate status on an item (or if you are unable to wait for a bckorder) please call or email before purchasing. If you do not see the size socket you are looking for contact Zdmak

Stahlwille sockets are made to exceed the standards of DIN 3124; they fit as tight as a glove and can withstand extreme torque loads.If you have never used German sockets on German fasteners, you will definitely notice a difference.No more sloshing around and rounding off heads of bolts. Stahlwille makes a wide variety of special tools that are ideal for working on German and other European automobiles, but they are equally useful for working on American and Japanese cars.

28mm Extra Deep Socket 34.50

1/2 inch Drive 28mm Deep Socket 12 Point.
High Quality Tools
Made in Germany by Stahlwille!

Please note: some of the items in the Stahlwille section of this website are (non stock) special order. If you need to know immediate status on an item (or if you are unable to wait for a bckorder) please call or email before purchasing. If you do not see the size socket you are looking for contact Zdmak

Stahlwille sockets are made to exceed the standards of DIN 3124; they fit as tight as a glove and can withstand extreme torque loads.If you have never used German sockets on German fasteners, you will definitely notice a difference.No more sloshing around and rounding off heads of bolts. Stahlwille makes a wide variety of special tools that are ideal for working on German and other European automobiles, but they are equally useful for working on American and Japanese cars.

27mm Extra Deep Socket 34.50

1/2 inch Drive 27mm Deep Socket 12 Point.
High Quality Tools
Made in Germany by Stahlwille!

Please note: some of the items in the Stahlwille section of this website are (non stock) special order. If you need to know immediate status on an item (or if you are unable to wait for a bckorder) please call or email before purchasing. If you do not see the size socket you are looking for contact Zdmak

Stahlwille sockets are made to exceed the standards of DIN 3124; they fit as tight as a glove and can withstand extreme torque loads.If you have never used German sockets on German fasteners, you will definitely notice a difference.No more sloshing around and rounding off heads of bolts. Stahlwille makes a wide variety of special tools that are ideal for working on German and other European automobiles, but they are equally useful for working on American and Japanese cars.

24mm Extra Deep Socket 31.50

1/2 inch Drive 24mm Deep Socket 12 Point.
High Quality Tools
Made in Germany by Stahlwille!

Please note: some of the items in the Stahlwille section of this website are (non stock) special order. If you need to know immediate status on an item (or if you are unable to wait for a bckorder) please call or email before purchasing. If you do not see the size socket you are looking for contact Zdmak

Stahlwille sockets are made to exceed the standards of DIN 3124; they fit as tight as a glove and can withstand extreme torque loads.If you have never used German sockets on German fasteners, you will definitely notice a difference.No more sloshing around and rounding off heads of bolts. Stahlwille makes a wide variety of special tools that are ideal for working on German and other European automobiles, but they are equally useful for working on American and Japanese cars.

BMW 3037 Pack 91.00

SET OF 3 Includes:
Holding Tool for securing water pump hubfrom rotating during R&R of fan clutch nut.Applicable: Engine M40, M41, M42, M60, M62
Plus *
2 Long Pattern Thin Wrenches
German Car Special Tools *
One of each size: 36mm and 32mm
Overall length of 20 inches.
Thickness of each wrench is 8mm.Tools will come with a handle grip on each.
Many applications for the two thin wrenches

BMW 3008 Pack 89.50

SET OF 3 Includes:
Holding Tool for securing water pump hubfrom rotating during R&R of fan clutch nut.APPLICABLE M10, M20, M30, M50, WITH 32MM CLUTCH NUT.
Plus *
2 Long Pattern Thin Wrenches
German Car Special Tools *
One of each size: 36mm and 32mm
Overall length of 20 inches.
Thickness of each wrench is 8mm.Tools will come with a handle grip on each.
Many applications for the two thin wrenches

Insulated Driver Set Made in Germany 48.50
Professional Quality Insulated Tool Set.Individually Tested Tools Certified To 1000 Volts.Tools Meet The Following Safety Specifications:ASTM F 1505 01 IEC 900 VDE 0682/Part 201 ISO 9001Certified Tools Meet OSHA Definition For Insulated Tool Requirements.Quality Tools Made In GermanyCVM Tool Steel Hardened To Average 58/60RC. 10 Piece Insulated Screwdrivers
Set Includes:Slotted: 2.0, 2.5, 3.0, 3.5, 4.5, 6.5 Phillips: 0, 1, 2, 3
read more:

Hazet Quality Tools 59.50
Bmw Headbolt Tool.
MADE IN GERMANY by Hazet!
E12 Female Special Lock Ball Torx Socket for cylinder head screws M42 4 cylinder/4 valve and M50 6 cylinder/4 valve. Drive size is 1/2 inch.
read more:

Pump Tool plus Pin , Plate and Holder 127.99

Set of 4 tools including:3032 Injection Pump ToolPuller used for the proper extraction of injection pump drive gear.Applicable: Volvo and VW / Audi diesels Excluding TDI * PLUS: VA6015 Used for accurate adjustment of Bosch diesel injection pump.PLUS: 2065A Diesel Camshaft Locking Plate Tool PLUS: 2064 Lock Pin for Diesel

Two Pickup Tools 9.99
RETRIEVER SET
Two tools for Picking up bolts, screws, washers, etc. from confined areas
Indispensible for home & workshop. Set includes:
RETRIEVER CLAW
Flexible shaft reaches confined areas, with durable holding claw
MAGNETIC RETRIEVER
With Flexible shaft also for reaching into tight spots, plus strong, durable magnet.
Both tools are 24 inches in length overall.
Picture shows both tools plus an exploded view of the claw end.
read more:

Locking Pin and Plate 26.00
Set of two tools including:2065A Diesel Cam Shaft Locking PlateThis locking Plate (above) is the same as vw tool 2065a Used for securing the cam shaft from rotatingand maintaining correct timing position during R&R of cam shaft drive belt.Applicable:All VW/Audi Diesel and Volvo 6 cylinder 2.4L diesel '81 '86 engines. PLUS:2064 Lock Pin for Diesel This Locking Pin is used forsecuring Bosch diesel injection pump sprocket from rotatingduring R&R of cam shaft drive belt.This Pin also assists in locating the general timing position of pump.Applicable: All VW/Audi diesel engines.
read more:

Radio Removal Set 24.99

Set of Volkswagen Audi Radio Removal Tools Audi A4, A6, A8 and New Beetle For Concert, Symphony I and Symphony II stereos. Also for Nav units in Trunk and for CD changers in Glove box.
PLUS * Set Number vw 3316 Radio Removal Tools New Body Style Passat Jetta Golf Please check your manuals for details.
You will get virtually full VOLKSWAGEN coverage with this set
Plus BMW Radio Removal Tool.Pentagon shaped tool with 3 5/8 inches overall length.Applicable: Most BMWs.This Five sided driver is used to release anti theft radio mounts.YOU ALSO GET THE SPECIAL SMALL ALLEN (Right) side of picture FOR NEWER E38 & E39 7 SERIES
Plus * MERCEDES RADIO REMOVAL KEYS FOR NEWER AND OLDER VEHICLES

Timing Belt Tensioner 44.95

Volvo Timing Belt Tensioner Tool with 6mm Hex Adjuster.On the 1998 and later Volvo engines the timing belt tensioner is located down near the bottom of the engine in a hard to reach area. This uniquely designed tool reaches down and rotates the 6mm hex adjuster on the timing belt tensioner so that one technician can easily set the correct tension preload and tighten the lockdown bolt. This unique tool works on all engines 98 and later with the 6mm allen adjuster and includes: 4 Cylinder, 1.9L, 5 Cylinder, 2.3L, 2.4L, 2.5L, 6 Cylinder, 2.8L, 2.9L

ZDMAK SPECIAL 2 Brake Tools 49.95

This sale is for two brake tools.
First tool on the UPPER LEFT is Drift Pin 4mm
Tool used for removing disc brake pads.
This Drift pin is designed to press the brake pad retaining pins back w/o damage to pin or caliper.
For a variety of brake applications. (overall length is 7 inches.)

Second tool LOWER RIGHT is the Spreader/Disc Brake Piston Reset Tool
This is a very useful tool for safe resetting of disc brake pistons on vehicles with fixed caliper disc brakes.

You Searched for

volvo special tools

Trade Links With ZDMAK