volvo camshaft tools SARASOTA volvo camshaft tools volvo crankshaft tools -- mmk4mkt

Bosch Jobsite Stereo CD 179.99
Bosch Power Box More than MusicA serious jobsite radio that charges batteries & gives you extra outletsCD player with anti skip technology & MP3 and CD R/RW compatible
Bosch claims its weatherproof Power Box radio is durable enough for a construction site, so we threw it across Boschs Booth at a recent tradeshow. Not only did it survive, the CD didnt even skip. This isnt the first job site radio but its the first to really impress us. Why? A steel and rubber frame protects the ruggedized shell, which houses four ground fault circuit interrupter (GFCI) protected outlets for power tools. The outlets cut power if water leaks in, so you wont get fried. Theres also a slot in the back to charge the batteries for your cordless power tools; when you find yourself away from an outlet the radio can run off those same batteries. The radio also includes a mini plug input for your MP3 player and a 12V DC outlet to recharge your cell phone. Quick word to the wise: if you plan to replicate our drop and roll test, we suggest unplugging all those accessories first!
Jenny Everett (Popular Science 2004)
read more:

Canvas Tool Bag 22.25
Canvas Tool Bag
Features & Benefits:
Big enough to hold and keep all your necessary tools.
Internal metal frame holds bag wide open.
10 Outside pockets to organizes tools.
14 Inside pockets for accessories.
Built of rugged 20oz. canvas material with hard bottom for better stability.
12 inch Long x 10 inch Wide x 11 inch Height
read more:

Stainless Steel Tool Box 44.95
20 inch Stainless Steel
Tool Box with recessed comfort handle.
Heavy duty box with removable inner tray
and strong double latch with padlock eyehole.
(tools not included).
read more:

Terminal Tool Wire Remover 13.99
Special Electrical Tools Terminal Tool Eliminate Damaged wires and Terminals.
Wire Terminal tools are designed to remove wires from terminals without damage to either. The prongs depress the "barbs" on conventional terminals. See set of 2 below.
read more:

Flexible Driver Set 4 29.95

You will receive 4 all four tools with this set. Included are 3 flex shaft (female) nut drivers 6, 7, and 8mm
Plus a very handy 1/4 inch (male) Driver.

Live Data Hand Held Scanner 2995.00

Tired of HIGH prices on Scanners?
Serious Inquiries email sales@zdmak.com or call Toll Free 877 938 6657
This is the X431 "All in One" Hand held Diagnostic Scanner
Designed for the professional workshop.
Vehicle year coverage 1988 to 2003 Japanese, and European Vehicles.
Features: Reading and Clearing Fault Codes, Live Data, Component Activation & Data Graphing
Built in Printer, Software update via PC and Internet. All software on 1 Compact Flash card.
Mercedes, BMW, Vauxhall, VW/Audi, Toyota/Lexus,Nissan, Honda, Mitsubishi, Mazda, Chrysler, Fiat, Kia, Hyundai, Daewoo, Ford, Volvo, Renault, CitroenNew Volvo, Renault, Daewoo, Fiat,Kia and Hyundai software available now.
More info Here

Long Pattern Hex Set 4 13.50

4 Pc Long Allen Hex Set
Sizes include: 6, 7, 8, and 10mm Hex.
This set works well on several vehicles such as Audi, AMC, BMW,
Honda, Jaguar, Jeep, Saab, Volkswagen and Volvo.
3/8 Drive set of 4

Long Thin Wrench Set 2 24.99

"Long" Pattern Thin Wrenches
Set of Two (2)
One of each size: 36MM and 32mm
Brand New "Long Thin Wrenches"
Many applications for these two tools,
especially for European cars.
Overall length of 15 inches.
Thickness of each wrench is 1/4" (6.35mm)
Some applications include:Mercedes and BMW R&R of fan clutch hub nut.
Porsche 32mm used for R&R of tie rods Model 911 Turbo, 89 76
36mm Needed for proper adjustment of rear ride height 911 , 89 77 etc...

Metric Wrench 4 Piece Set 62.50

Spanner Wrench Set needed for R&RThis 4 pack set includes (1) each of the following wrench sizes:27mm, 30mm, 32mm, 36mm. Some pplications include: Porsche models 911, 930, 914 6, 944, 968. This is a German Car Specail * This set is great for the European Automotive Technician. Very Handy Tools!

Nissan Valve Tools 27.99

For overhead camshaft engines using spacer shims.
This unique tool has been designed to allow for easy valve adjustement on all NISSANS, and many other overhead camshaft engines using spacer shims for valveadjustment in operation.

Oil Seal Installation Bonus Kit 159.50

Universal Asian Oil Seal Installation Bonus Kit
This special kit was designed for the proper installation of crank shaft oil seals, situated within confined areas on most 4, 6 and 8 cyl Toyota, Lexus, Nissan, Mitsubishi, Mazda and Infiniti.Application includes camshaft oil seal installation of Toyota Lexus 2.5L, 2.8L, 3.0L, 3.4L, 4.0L & 4.3L The stepbolts screw into the cam or crankshaft end. The press nut and washer allows for an even pressing force, seating the oil seal into the engine case with ease.

See tool TOY100 for 4 cylinder Asian camshaft oil seal installation. Honda Acura, see tool HO100, HO105, HO115, and HO115 WB.

Panel Popper Set of 5 19.50

DOOR PANEL &UPHOLSTERY TOOLSComplete Panel "Popper" Tool Set
Super Tools for Auto Interior Work
This 5 Piece Set of plastic pry pullersis perfect for working on those expensive panels on car interiors.It will also help work loose plastic decorative inserts, door moldingsand countless other pieces on todays modern and many vintage cars.
*You may have seen other sets like this, but they only come with 4 pieces...This set has 5 pieces with more features plusthe quality of this set is better (stronger and more durable) than other being sold,
making this a much better deal.
This set comes in a Clam Shell Protective Container.

Pressure Adaptor 28.50

Pressure Adaptor 1018 Used for pressuring the master cylinder or clutch slave cylinder reservoirs.Used in conjunction with a pressure bleeder.Comes with a 1/4 18 NPT threaded opening. Applicable:Most Volvo "Except" S40 and V40.

Set 2 Tie Rod Tools 89.00

Set of 2 Pullers including:
Large Tie Rod Tool VW 1014 Separator used for disassembly of pitman arm type tie rod ends without tearing the ball joint boots. Opening size is 25mm. Most VW Audi & Late Porsche models.

PLUS *

Puller P266HX Separator used for disassembly of Pitman arm type tie rod ends without tearing the boots. Opening size is 18mm. Most VW Audi Late Porsche models.

Special Open Socket 22mm 25.00

On Sale *
22mm Special TubeSocket
1.) Used for securing the Strut tower retaining nut of most European models (crucial when adjusting tension of front shocks). The 2/3 open side walls of this socket allows for easy access of an adjusting wrench. (normally 7mm Allen Hex Wrench)
2.) R&R of Oxygen Sensor.
Also for R&R of some Mercedes Diesel injectors ( OM604, 605 & 606).
Details: For removing and installing front strut unit on VW Golf up to 1988, Jetta up to 87, Scirocco, Audi 80 and Golf 3 from 1993 newer, Passat from 88 and newer, Audi 100, 200 Coupe and Quatro.
This tool is often used in conjunction with a 7mm hex wrench.
Clickhere for a picture of the tools in action: 

Toyota / Asian Oil Seal Bonus Kit 159.50

Toyota Bonus Set 37.99

ZDMAK SPECIAL DEAL
Headbolt tool and Valve tools...
First Item: Valve tool designed to allow for easy valve adjustment on most Toyota overhead cam engines using spacer shims for valve adjustment. In operation, the tip of the pliers pushes between the spacer shim and the camshaft as the pliers are squeezed close. This action moves the shim and its valve lifter down from the camshaft lobe. In the down position the separate wedge tool is placed between the valve lifter ledge and the camshaft. This wedge tool then maintains a gap between the shim and the camshaft as the pliers are removed. The spacer shim can then be removed through this gap and replaced with one of the correct thickness. Works especially well with 3S FE and 3S GELC Toyota DOHC.Toyota number 09248 55040For Camry, Sienna, Avalon, Solara, Supra, 4Runner, MR2, Previa, Paseo, Tacoma, Tercel, T100, Celica.Packaged as shown with pliers and spacer wedge. Does not work with Land Cruiser 1993 1997 and Lexus LX400 1994 199

PLUS * Toyota Headbolt Tool
12 Point (Triple Square) Socket.
This item is called XZN (style) and is very hard to find. 1/2 Drive Socket is 100mm long, for easy access to hard to reach headbolts.

Toyota Lexus Cam Tool Kit 58.00

Cam Seal Installer w/ 10 & 12mm X 12.5 Threaded Cam Bolts Features and Benefits: This tool is designed to easily install the cam seals in 4 & 6 cylinder engines for Mazda, Nissan & Toyota/ Lexus engines that have 10 & 12mm x 1.25 cam bolts. These engines are mounted transversely which puts the camshaft end in very close proximity to the shock tower making replacement of the cam seal extremely difficult using conventional methods. Simply screw the threaded rod into the cam end, slide the body over the rod against the seal and press in the seal using the nut provided. This tool comes in black finish.

Toyota Valve Adjustment Tool 19.99

This tool has been designed to allow for easy valve adjustment on most Toyota overhead cam engines using spacer shims for valve adjustment. In operation, the tip of the pliers pushes between the spacer shim and the camshaft as the pliers are squeezed close. This action moves the shim and its valve lifter down from the camshaft lobe.In the down position the separate wedge tool is placed between the valve lifter ledge and the camshaft. This wedge tool then maintains a gap between the shim and the camshaft as the pliers are removed. The spacer shim can then be removed through this gap and replaced with one of the correct thickness.
Works especially well with3S FE and 3S GELC Toyota DOHC.
Toyota number 09248 55040
For Camry, Sienna, Avalon, Solara, Supra, 4Runner, MR2, Previa, Paseo, Tacoma, Tercel, T100, Celica.
Packaged as shown with pliers and spacer wedge.Does not work with Land Cruiser 1993 1997 and Lexus LX400 1994 1997

13 x 14mm Drain Plug Wrench 72.98

13 x 14mm Drain Plug Wrench.
World Class Hazet Tools Made in Germany!

2 Piece Set 58.99

Set used for removing/installing lock carrier on hood.
Brand new factory tools Made in Germany.

2 Pins and 2 Plates 103.00

2 Pins and 2 Plates Set of four tools.VW Audi T.D.I. and New Beetle Cam Kit Reference numbers for the two tools on the left are: 3418 and 3359. Tool Set for factory correct and trouble free installations. This is a popular set for Diesel timing of Bosch injection pumps. This set has been developed for aligning the cam shaft with the Diesel pump on 1998 and newer VW models equipped with a T.D.I. engine. This two piece lock plate and alignment pin allows the technician for factory correct and trouble free installations.

Tools on the right side of image are Diesel Lock Plate / Cam Setting Bar Same as Volkswagen ref 2065a Tool used for securing the cam shaft from rotating and maintaining correct timing position engine AAZ during R&R of cam shaft drive belt. Applicable: VW/Audi diesel and Volvo 6 cylinder 2.4L diesel 1981 86 Lock Pin for Diesel (Same as VW tool 2064). Tool used for securing Bosch diesel injection pump sprocket from rotating during R&R of cam shaft drive belt. This Locking Pin also assists in locating the general timing position of pump. Volkswagen Audi diesel and Volvo 6 cylinder 2.4L diesel 1981 86 All 4 tools are High Quality Made in Europe!

22mm Strut O/2 Sensor Socket 18.99

On Sale 22mm Special Tube Socket 1.) Used for securing the Strut tower retaining nut of most European models (crucial when adjusting tension of front shocks). The 2/3 open side walls of this socket allows for easy access of an adjusting wrench. (normally 7mm Allen Hex Wrench) 2.) R&R of Oxygen Sensor.
Also for R&R of some Mercedes Diesel injectors ( OM604, 605 & 606). Details: For removing and installing front strut unit on VW Golf up to 1988, Jetta up to 87, Scirocco, Audi 80 and Golf 3 from 1993 newer, Passat from 88 and newer, Audi 100, 200 Coupe and Quatro. This tool is often used in conjunction with a 7mm hex wrench.Clickhere for a picture of the tools in action:

3 Piece Strut Set 34.99

On Sale! 22mm Tube Socket Plus Pin Wrench number VW524, Plus 7mm Allen Wrench
Tools used for securing the Strut tower retaining nut of most European models
(crucial when adjusting tension of front shocks). The 2/3 open side walls of
this socket allows for easy access of an adjusting wrench.
(normally 7mm Allen Hex Wrench)
Also for R&R of Oxygen Sensor.

VW524 Pin Wrench Socket with 1/2" drive. This tool is used for R&R of
grooved ring retaining nut on strut tower of front shock absorber.
Also used for adjusting power steering gear on VW Jetta, Golf, GTI.

3 total pieces in this set: 2 Sockets and 7mm Allen Wrench.
The Allen wrench is 7.5 inches long.

41mm Socket 3/4 Drive 54.99

Hazet 41mm Socket 6 Point 3/4 Drive size with locking Pin.
World Class Hazet Tools Made in Germany!

5 Pc UpholsterySet 48.00

Upholstery Tool Set
5 Pieces in plastic tray.
Red & black grips.
Set includes one of each large and small "V" notch, and one of each large and small "U" notch, plus one hinge side (hook style)All tools ahve two component handles and Stainless Steel blades.Super High Quality Tools.

5 Point Star Bit Set 20.00

SECURITY TORX PLUS BIT SET
5 Point Star Security TORX PLUS Insert Bit Set with Mini Ratchet
5 Point set includes sizes TS10, 15, 20, 25, 27, 30, 40
Please note there are 10 total bits and only 7 actual sizes you will get each of the sizes above plus the kit has an extra size 25, 30 and 40 because the 25, 30 and 40 are the popular sizes and tend to wear out (or get lost) faster than the other sizes.
These are Security Torx Plus Tools and they Do NOT work in a standard Torx Fasteners.
Reminder: These are 5 point tools AND THEY ARE TAMPERPROOF VERY RARE AND HARD TO FIND SET!
You will get both the bit set and the mini ratchet with this purchase.

Torx, Torx Plus and Camcar are registered trademarks of Textron, Inc. Torx plus is designed to allow greater torque, and to minimize wear.

5mm Ball Tip Hex Socket 21.50

5mm Ball Tip Hex Socket 3/8 Drive. Overall Length is 116mm.
Super High Quality Tools Made in Germany!

Air Bag Tool 0

New Beetle Air Bag Tool
TOOLS USED TO REMOVE AIRBAG ON NEW BEETLE UP TO MODEL YEAR 2000.

ASSEMBLY SET 375.00

WHEEL BEARING ASSEMBLY SETUSED TO REMOVE AND INSTALL REAR WHEEL HUB AND WHEEL BEARINGS. EUROVAN. Also used to remove and install oil seals in upper cover for camshaft timing chain.

Audi Info and Timing 0.00

There are three main Cam bars for timing.
3391, 3243 and T40005
(T40005 is for V 8)
Notice the tool number 3242 this is the T.D.C (TOP DEAD CENTER) Pin
This pin goes with 3391 or 3243.
Type your selection in the search or you can find the tools in this Audi section.
Feel free to call me or email. I will try to assist you.
Please note:
In order to make your selection you must determine if your vehicle is 2 valve per cylinder or 5 valve per cylinder or V8. Example = Notice tool number 3391 says it is for 5 valve. The 3243 is for 2 valve per cylinder.

Bar and Pin for 5 Valve 139.50

Camshaft Timing Tool Set (2)
TOOL REF 3391
Cam/Bar Holder
V6 / 5 valves per cylinder/
used for the crucial task of securing both engine banks/
camshafts at T.D.C when replacing the timing belt/
to properly align camshaft during timing belt change /head assembly work.
Applicable VW Audi V6 5 Valve 1998 2003
Cam/Bar Holder Not Applicable 3.0 2002 4 cam.

TOOL REF 3242
Crankshaft T.D.C. Lock Pin
Holds crankshaft at top dead center
For installing or removing toothed belt /flywheel drive plate.
T.D.C. Pin Applicable: A4 A6 Volkswagen Passat
Engine Applicable: Volkswagen AHA BDP ATQ BCY
Audi AAH AFC ATQ AHA AKB ART AUX BFM BHF BNK BSB AVK AWN AYS BBD BCY & BEL
T.D.C. Pin Not Applicable 3.0 V6Please note: 3391 for 5 valves per cylinder.

Best Quality Thin Wrench Set 68.50

Set of 2 Long Pattern Thin Wrenches
German Car Special *
One of each size: 36mm and 32mm
Overall length of 20 inches.
Thickness of each wrench is 8mm.Tools will come with a handle grip on each.
Many applications for these two tools.

BigMak Timing Kit 196.00

Master Kit
Set of 6 Tools
Including Dial Indicator

Set Includes:
3032 Injection Pump Tool Puller used for the proper extraction of injection pump drive gear. Applicable: Volvo and VW / Audi diesels Excluding TDI
PLUS: VA6015 Holder used for accurate adjustment of Bosch diesel injection pump.
Plus: 2065A Diesel Camshaft Locking Plate Tool
PLUS: 2064 Lock Pin for Diesel.
Plus the Pin Wrench (made in Germany) for easy adjustment of Camshaft spur belts (toothed belt) on idler Pulleys with Pin holes. This wrench with its protruding pins, grabs the center of the idler pulley and rotates around the off center retaining bolt allowing for easy belt tension adjustment. Tension Pulleys on 4 cylinder Golf, Jetta, Passat and Corrado. Audi 80.
Plus Dial Indicator

Bonus Torx Set 26.00

Torx Bonus Set Including Screwdriver Set 7 Pc. Sizes included: T8, T10, T15, T20, T25, T27 & T30.
Torx (6 Point) heads used for a wide variety of applications and a wide variety of vehicles. Please note: The screwdrivers are not tamperproof they are standard torx. The folding unit and ratchet at the bottom of the picture are both tamperproof. The Fold up tool has Tamperproof Torx tips. Each torx blade has a hole in the tip = Tamperproof) The sizes are: T9, T10, T15, T20, T25, T27, T30, T40 Some applications include: The T25 for use on E34 E32 E36 E39 E38 (tilt slide sunroof). The T30 is for most BMW with supplemental restraint systems / SRS (BMW REF 002110). The T20 is for some applications on E38 (Diffusion Disc Mount).
Torx Combo Mini Bit and Ratchet SetThe seven bits on the left side of the bit holer are Torx TamperproofPlus this set has 1 and 2 Phillips bits, and a flat head bit.The Tamperproof Torx sizes are: T10, T15, T20, T25, T30, T40for Volkswagen, Audi,Volvo, Mercedes and BMW applications.
You will get all of the tools shown here with this purchase.

CAM & CRANK TOOLS 127.50

FOR INSTALLATION OF CRANKSHAFT PULLEY INTERMEDIATE SHAFT & CAMSHAFT OIL SEALS.
4 PIECE TOOL SET

CAM ADJUSTMENT KIT 0.00

LOCATE CAMSHAFT WHEN ADJUSTING TIMING PLEASE CHECK MANUALS FOR NUMBER 3199 BEFORE ORDERING.

Cam Bar and Pin for 2 Valve 139.50

Camshaft TimingTool Set (2)
TOOL REF 3243
Cam/Bar Holder 2 valves per cylinder/
Used for the crucial task of securing both engine banks/
camshafts at T.D.C when replacing the timing belt/
to properly align camshaft during belt change head assembly work.
Applicable Audi 90 A6 A4  94 97 AFC Engine

TOOL REF 3242
Crankshaft T.D.C. Lock Pin
Holds crankshaft at top dead center
For installing or removing toothed belt /flywheel drive plate.
T.D.C. Pin Applicable: A4 A6 Volkswagen Passat
Engine Applicable: Volkswagen AHA BDP ATQ BCY
Audi AAH AFC ATQ AHA AKB ART AUX BFM BHF
BNK BSB AVK AWN AYS BBD BCY & BEL
T.D.C. Pin Not Applicable 3.0 V6

Please note: 3243 for 2 valves per cylinder. 

Cam Bar for 2 Valve 129.50

Camshaft Securing Bar Timing Tool
TOOL REF 3243
Cam/Bar Holder 2 valves per cylinder/
Used for the crucial task of securing both engine banks/
camshafts at T.D.C when replacing the timing belt/
to properly align camshaft during belt change head assembly work.
Applicable Audi 90 A6 A4 94 97 AFC Engine
Please note: 3243 Securing Bar for2 valves per cylinder.

Cam Bar for 5 Valve 129.50

Camshaft Timing Tool Securing Bar
TOOL REF 3391
Cam Securing Bar Holder
V6 / 5 valves per cylinder/
used for the crucial task of securing both engine banks/
camshafts at T.D.C when replacing the timing belt/
to properly align camshaft during timing belt change /head assembly work.
Applicable VW Audi V6 5 Valve 1998 2003
Cam/Bar Holder Not Applicable 3.0 (2002 4 cam)
Please note: 3391 for 5 valves per cylinder.

Cam Kit 2 Tools 88.50

New Beetle and T.D.I. Cam Kit Tool Set for factory correct and trouble free installations. This is a popular set for Diesel timing of Bosch injection pumps.This set has been developed for aligning the cam shaft with the Diesel pumpon 1998 and newer VW models equipped with a T.D.I. engine.This two piece lock plate and alignment pin allows the technician for factory correctand trouble free installations Reference: 3418 and 3359.

Cam Shaft Locking Plate 16.99

Cam Shaft Locking Plate 2065AUsed for securing the cam shaft from rotatingand maintaining correct timing position during R&R of cam shaft drive belt.All VW Audi Diesel and Volvo D24 6 Cylinder 2.4L diesel 1981 86 engines.

Cam Tool Puller 289.50

Volkswagen ref: T40001
First number 2510 1
Extractor (Puller)for the camshaft phasing gear with 5 and 6 spokes on 4 resp.
6 cylinder engines TDi, engines V6 and V8,
AUDI A 4, A 6, A 8
Second Item 2510 8 Extraction Hook
for the careful extraction of camshaft phasing gear with 5 spokes on VW/AUDI V8 carburetor engines.
Call if you have questions about this item.

Camshaft Locating Fixtures 150.00

Timing tools sold as a set (2) pieces.
Camshaft positioners, number 3341 especially for Audi A8.

Chain Adjuster 24.50

3366CHAIN ADJUSTER Required to change the troublesome cam adjuster seal
Audi and Volkswagen 4, 6 (2.7 and 2.8) and 8 CylWith 5 Valve per Cyl.
Also Audi VW 1.8 Golf Jetta Passat New Beetle
Note:The manual says to remove both camshafts to change the seal ...
but using this tool you can relieve the tension on the camshaft chainand lift it up far enough to clean, remove and replace the gasket and seal.
This procedure not only saves time but saves any other damagethat may happen to camshafts and bearings by removing them.
ORIGINAL MATRA FACTORY TOOL MADE IN GERMANY

CIS Injector Puller 9.99

Number 1123/4CIS Injector Puller tool used to easily remove CIS fuel injectors on many in line engines.In operation, this tool fits around the injector base and with a screwdriver(used as a lever put into the slots of the tool)simply "POP" the injector out, without damage to the injector hose.Applications include: All Gas Water Cooled Volkswagen,Porsche 924 and Audi 4000, 5000 with mechanical fuel injectors.
High quality Cis and Cis E fuel injector puller tool This is by far one of the more useful tools in the shop. If you have ever attempted the "two screwdriver technique" you will know it can be tricky. Injectors are proned to rusting when they have been in the head for a long period of time, they become lodged in there and are next to impossible to wiggle out without damaging expensive lines. This tool made of high tensile strength steel and hooks around the base of the injector; where they are intended to be pulled from.

Cylinder Head Tools 23.50

Cylinder Head Alignment Kit VA6000 Like Volkswagen Tool 3070 Set comes with (2) pairs of guide pins, 11X1.75mm and 12X1.75mm.VW model Scirocco, Rabbit, Dasher, Fox. Audi model 4000, 5000

Dial Gauge Holder 37.50

Dial Gauge Holder VA6015Diesel Tool Used for accurate adjustment of Bosch diesel injection pump. (SAME AS VW TOOL 2066)
This Dial Gauge Holder screws into the back of theinjection pump and comes equipped with a 10cm dial indicator extension pin. This tool is to be used in conjunction with a dial indicator (not included).All VW Audi diesel and Volvo D24 6 cylinder 2.4L diesel 1981 86 engines. This holder will only work with a dial guage with a shank size of 8mm or less.
It will NOT work with a larger shank.

Dial Indicator and Holder 98.50

Bosch Diesel Injection Pump
Timing Indicator Tools.
With High Quality Dial Indicator Made in Germany!
You will not find this price anywhere except Zdmak!
Tools are used for the accurate setting of
the Bosch diesel fuel injection pump timing.
The Holder screws into the back of the injection pump,
giving a dial indicator reading necessary for setting
the correct pump timing.
This set comes complete with the correct tools for the job!
Contents: Metric Dial Indicator Made in Germany,
plus holder plus the 10cm dial indicator extension pin,
making the timing easy to set,
as the timing has a range from 0.83mm to 1.15mm.
For use on VW and Audi diesels.
Also works with 1981 1986 Volvo 6 cyl 2.4L diesels,
1989 1994 Dodge 6 cyl 5.9L diesels.

FYI FOR PEOPLE WHO DECIDE "NOT" TO USE THIS SET
Here is some helpful info...Universal conversion factor for milimeters into decimal inches is .03937
EXAMPLE: 13mm X .03937= .5118"

Duckwear Tool Roll 19.99

Bucket Boss Brand Duckwear Tool Roll Rolls up to store easily in small places Divided pockets organize and protect wrench sets, screwdrivers, tire gauges and more. Socket strip holds 3/8 inch or 1/4 inch sockets. Product Description From the Manufacturer:A clever self contained design with 23 pockets for wrenches, ratches and automotive hand tools. Equipped with socket clips that hold 3/8 inch and 1/4 inch sockets. Entire unit rolls up and secures with two barrel locks and a carry handle for transport. For the house, truck, boat and shop. Heavy duty and much better than a small bulky tool box. The open end of the tool slots face to the inside so wrenches and screwdrivers dont fall out when it is rolled up. The draw strings on each end are a heavy elastic with a quick tie so the whole thing stays together.

You Searched for

volvo camshaft tools

Trade Links With ZDMAK