brake tool SARASOTA brake tool vw radio tool -- mmk4mkt

Brake Piston Tool Set 0.00
Tool for rotating and pushing back brake pistons,
. The adaptor and adjusting screw can be rotated simultaneously to rotate and push back brake pistons, without damaging threads.. Also suitable for brake calipers without any handbrake mechanism.. Supplied with 3 adaptors
read more:

ZDMAK SPECIAL 2 Brake Tools 49.95

This sale is for two brake tools.
First tool on the UPPER LEFT is Drift Pin 4mm
Tool used for removing disc brake pads.
This Drift pin is designed to press the brake pad retaining pins back w/o damage to pin or caliper.
For a variety of brake applications. (overall length is 7 inches.)

Second tool LOWER RIGHT is the Spreader/Disc Brake Piston Reset Tool
This is a very useful tool for safe resetting of disc brake pistons on vehicles with fixed caliper disc brakes.

Super Duty Disc Brake Tool 0.00
Heavy Duty Brake Tool
For safe resetting of disc brake pistons
on vehicles with fixed caliper disc brakes.
Extremely High Quality Tool Made in Germany.
Call for more info.
read more:

Brake Piston Tool 13.99
DISC BRAKE PISTON TOOLFor use on most popular import, Chrysler, Ford and GM vehicles with 4 wheel disc brakes Removes and installs disc brake pistons Re aligns piston slots (where applicable) to back of brake pad Rotates piston back into caliper For use with 3/8" dr. ratchet extension.
read more:

Brake Pad Spreader 14.99

Disk Brake Pad Spreader
Tool used for changing brake pads easy!
The tool compresses inner brake pad, resets piston for easy pad replacement.
Durable heavy duty construction.

14mm Brake Tool 34.99

14mm Hex Bit Brake Tool Ford Features:This unique tool has been developed to aid in the removal and installation of front disc brake calipers found on most 1984 and later Ford 6000, 7000 and 8000 CF series trucks. The use of this tool allows for quick and easy removal of the caliper without disassembling the front axle and steering arm assembly.Made from heat treated steel this tool comes in a black finish.

Saab Brake Piston Turning Tool 25.50

Turning Tool needed for rotating the piston backinto the brake caliper when replacing brake pads.Applicable: Saab models '87 and older. Excluding 9000 series

Brake Bleeder Kit 38.99
This Kit is one of the most useful products because it works for Automotive Motorcycle or ATV. Transform brake bleeding into a one hand, one person task. Makes a great motorcycle brake bleeder. Using the vacuum generated by the Mityvac pump, the user can draw out the brake fluid quickly and cleanly into a reservoir container. It bleeds hydraulic lines of most automotive brake systems, quickly and cleanly, including some anti lock brake systems (ABS). This kit contains the Mityvac Repairable Vacuum Pump, Reservoir Jar with Transfer Lid, Storage Lid, Brake Bleeding Adapter Package, 24 inches of 1/4" I.D. Tubing and our 110+ page Users Manual. Visit
read more:

Brake Caliper Rewind Set 47.99
U.S./EURO/ASIAN/4WD VEHICLES
Disc Brake Pad & Caliper Service Tool Kit
Includes 8 adapters Magnetic socket adapter.
For brake assemblies
For rotating pistons back into caliper to provide clearance for new pads
Prevents damage to the piston and bootDesigned for use with Mercedes, BMW, Volkswagen, GM, Audi, Ford,Honda, Subaru, Mazda, Nissan, Mitsubishi, Toyota, Land Rover and 4 wheel drive vehicles.Blow molded carryingcase for easy storage.
read more:

Brake Gauge Made in Germany 00
Din 892, for measuring the thickness of disc brakes.
Stainless Steel with locking screw and trailing vernier scale (1/10mm) comes in a leather pouch.
Quality Stahlwille Tools!
This brake gauge measures the thickness of car and motorcycle brake discs in situ. When examining brake discs, refer to the manufacturers instructions. Measuring the thickness is simple using the brake disc gauge, and does not require the discs to be removed first!
read more:

Brake Piston Tool 14.99

Disc Brake Piston Cube Tool has 5 different drive pin configurations designed to rotate the parking brake activated piston back into the caliper cylinder when replacing worn pads on vehicles equipped with 4 wheel disc brakes. Tool will service many domestic and import cars. This tool will work in place of special tool 3272. Some Audi VW calipers (mid 80s) use a hex tool check yours to be certain a pain in the neck if you have never done them before. Grind or file off two diagonally opposite corner pins to allow the cube to fit the vw rear brake piston. Use with a 3/8" ratchet. It can be easier to fasten the rear caliper back onto the carrier without the rotor in place while using this tool. That way you get a little extra leverage. Use as follows: engage the two prongs and turn the piston 180 clockwise. Remove the tool. Use a generic calper tool or a c clamp and push the piston in about 2mm. Keep alternating back and forth between the cube tool and the c clamp until the piston in almost all the way in. If you are strong enough, you may not even need the c clamp just push with the cube tool as you turn. Instead of the cube, you can even use needle nose pliers, but then you defintiely need the c clamp. The rear brakes can be rather difficult, so make sure you have plenty of time. Also for use on most popular imports and Chrysler, Ford and GM vehicles with 4 wheel disc brakes.

T Handle Brake Hook 8.99

T Handle Brake Tool for mounting and dismounting thespring of brake shoes on vehicles with rear disk brakes.

Brake Tool 25.00

NUMBER 3289Brake Release Tool Volkswagen VR6 JettaTool is used to disconnect brake pedal from booster.This is an Original VW Factory ToolMade in Germany for Volkswagen By Kukko*

Disc Brake Piston Reset Tool 34.50

Very Useful tool , For safe resetting of disc brake pistons on vehicles with fixed caliper disc brakes.

Nissan Turning Tool 12.50

Nissan tool, used for rotating the piston back into the rear brake caliperwhen replacing brake pads.Applicable: Nissan models, 81 with rear disc brakes.

Brake Return Spring Tool 8.50

Brake return Spring Tool
Used to hook the return spring on vehicles without anchor pins.Excellent for the professional or shadetree mechanic!

BRAKE TOOL 3343 0.00

ADJUSTMENT WRENCH USED WHEN ADJUSTING PARKING BRAKE. (REPAIR GROUP 46)

Factory Brake Caliper Tool 98.50
T10165 Brake Caliper Tool
The old number for this tool was 3272
(discontinued)
T10165 is the correct current factory number for this tool.
Brand New Tool
Made in Germany.
Some Vehicles include: Beetle 1.8 Turbo
(see your manual for exact year model applications tool number T10165 or old number 3272 same as T10165)
Beetle 4 CYL , Beetle TDI Diesel , Corrado SLC V6 ,
Golf Cabrio IV GL , Golf Cabrio IV GLX , Golf III GL 4 CYL ,
Golf III GTI 4 CYL , Golf III GTI VR6 , Golf III TDI Diesel , Golf IV 4 CYL ,
Golf IV GL 4 CYL , Golf IV GLS 4 CYL, Golf IV GTI 1.8 Turbo ,
Golf IV GTI VR6 AFP , Golf IV TDI Diesel , Golf IV VR6 AFP ,
Jetta III GL 4 CYL , Jetta III GLS 4 CYL , Jetta III GLX VR6 ,
Jetta III TDI Diesel , Jetta IV 1.8 Turbo , Jetta IV GL 4 CYL ,
Jetta IV GLS 4 CYL , Jetta IV GLS VR6 AFP , Jetta IV GLX VR6 AFP,
Jetta IV TDI Diesel , Jetta Wagon 1.8 Turbo , Jetta Wagon 1.9 TDI ALH ,
Jetta Wagon 4 CYL AZG / AVH, Passat TDI Diesel ,
Passat V6 30V AHA / ATQ , PassatTurbo 20V AEB
read more:

Brake Caliper Rewind Set 49.50

U.S./EURO/ASIAN/4WD VEHICLES
Disc Brake Pad & Caliper Service Tool Kit
Includes 8 adapters Magnetic socket adapter.
For brake assemblies
For rotating pistons back into caliper to provide clearance for new pads
Prevents damage to the piston and bootDesigned for use with Mercedes, BMW, Volkswagen, GM, Audi, Ford,Honda, Subaru, Mazda, Nissan, Mitsubishi, Toyota, Land Rover and 4 wheel drive vehicles.Blow molded carryingcase for easy storage.

Caliper Tool 19.99

SPANNER SOCKET RR CALIPER USED TO TURN THE REAR BRAKE CALIPER PISTONS WHEN REPLACING BRAKE PADS

Caliper Tool 24.50

SPANNER SOCKET RR CALIPER USED TO TURN THE REAR BRAKE CALIPER PISTONS WHEN REPLACING BRAKE PADS

Brake Tool 8.99

BRAKE SPRING COMPRESSORFor removal and replacement of backing plate springs, cups & pins Pro style heat resistant handle Improved tip design grips parts more securely

Brake Caliper Tool 110.00

T10165 Brake Caliper Tool
The old number for this tool was 3272
(discontinued)
T10165 is the correct current factory number for this tool.
Brand New Tool
Made in Germany.
Some Vehicles include: Beetle 1.8 Turbo
(see your manual for exact year model applications tool number T10165 or old number 3272 same as T10165)
Beetle 4 CYL , Beetle TDI Diesel , Corrado SLC V6 ,
Golf Cabrio IV GL , Golf Cabrio IV GLX , Golf III GL 4 CYL ,
Golf III GTI 4 CYL , Golf III GTI VR6 , Golf III TDI Diesel , Golf IV 4 CYL ,
Golf IV GL 4 CYL , Golf IV GLS 4 CYL, Golf IV GTI 1.8 Turbo ,
Golf IV GTI VR6 AFP , Golf IV TDI Diesel , Golf IV VR6 AFP ,
Jetta III GL 4 CYL , Jetta III GLS 4 CYL , Jetta III GLX VR6 ,
Jetta III TDI Diesel , Jetta IV 1.8 Turbo , Jetta IV GL 4 CYL ,
Jetta IV GLS 4 CYL , Jetta IV GLS VR6 AFP , Jetta IV GLX VR6 AFP,
Jetta IV TDI Diesel , Jetta Wagon 1.8 Turbo , Jetta Wagon 1.9 TDI ALH ,
Jetta Wagon 4 CYL AZG / AVH, Passat TDI Diesel ,
Passat V6 30V AHA / ATQ , PassatTurbo 20V AEB

Honda Acura Bushing Tool Kit 189.00

Honda Acura Bushing Removal and Installation Tool easily and quickly removes and install trailing arm bushing in 15 minutes per side versus the factory "book" time of 1.8 hours per side. No removing the arm from the vihicle and using a hydraulic press. No need to disconnect brake parts such as calipers, rotors, shoes, lines or brake cables.
Works on Civic 1988 2000, CRX 1988 1991, Del Sol 1993 1997
Acura Integra 1994 2001

Brake Spring Plier 11.99

Brake Spring Tool for removing and installing Shoe return springs on most drum brakes. The socket end removes the spring from the anchor stud, and the notched end installs the spring on the anchor.

Drift Pin 18.50

Drift Pin 4mm Number P1045XDrift needed for removing disc brake pads.This Drift is designed to press the brake pad retaining pins backw/o damage to pin or caliper. Applicable: Porsche models.Also, for a variety of other applications.(Overall length of tool is 7 inches.)

Brake Guage 99.95

German Quality Caliper Gauge.
For Brake Disks on passenger cars and motorcycles.
Measuring range 60 mmjaw 75 mm.
Stainless Steel
Reading Parts: dull chrome.
(Also works on Mercedes same as MB number 140 589 0019 00). Quality tool made in Germany.

Digital Brake Gauge 99.95
Digital Brake Gauge
Features and Benefits:
Measuring range: 0 150mm / 0 6inchAccuracy: + 0.02mm / 0.001inchLCD display
Includes: One silver oxide battery SR44,1.55v
read more:

Brake Caliper Brush 14.95
SK Facom
Heavy Duty Brake Caliper Brush
. Heavy duty steel wire.. Angled head for access.. Comfortable handle.
read more:

Long Handle Fuel Clamp 8.99

Long Handle Fuel Clamp
Quickly clamp off your brake and fuel lines while you do maintenance work. Smooth, rounded edges will not damage hoses. Easy operation, just a simple squeeze opens and closes.
For each brake line and the master cylinder to ensure minimal fluid loss and shorten bleeding time. Tool is 6 1/2 inches long.

The Beta Tank Tool Trolley 00
ItemCX25DescriptionTank trolley with compartmentSpecificationsMain features:Foldaway lid.1 sliding drawer.Tool tray protected by foamed rubber mats.Shelves protected by oil and fuel proof mats.Four castors 0 100 mm in 0:2 fixed and 2 swivelling (one with brake).Safety lock.One more shelf M4 can be added on the opposite side.Thermoformed tray for 1/2' sockets and accessories.Paper roll holder item 2499PC can also be included.Lower compartment, 290 mm high with 2 safety locks.Locking system of the lids in the open position.
read more:

7mm Super Stubby Hex 3/8 Drive 25.00

3/8 Drive Hex "STUBBY" 7mm
All the BMW People are after this tool.
Tool is exactly 1 inch long.
Hard to find and even harder to find at a good price.
Super Stubby 7mm Hex Socket for brake work on BMWs.
Drive size is 3/8.
(This tool is also available in a less expensive 1/4 drive
type in the number HEX7MM in the search button)
However most BMW people want this size (3/8).

Brake Bleeder Wrench 9mm 5.99

Offset Brake Bleeding Wrench 9mm x 7mm.

Brake Bleeding Wrench 9mm 28.50

Brake Bleeding wrench 9mm. Made in Germany.

9 inch Brake Spoon 10.50

9 inch BRAKE SPOON. Drop forged steel. Chrome plated to resist corrosion.

Brake Bleeding Wrench Set 9.99

Offset Brake Bleeding Wrench Set
Size of wrench 9mm x 7mm and 8 x10mm. Excellent for the professional or shadetree mechanic.

Two Stubby Sockets 23.99

Two Special Short Pattern Sockets
One of each 7 and 14mm.
Details: The 7mm socket is 1/4 inch drive and the 14mm socket is 3/8 drive.
The 14mm is designed for R&R of gearbox drain plugs.
PLEASE READ: THE 14MM TOOL IS JUST UNDER 1 1/4 INCH LONGVERY HARD TO FIND IN THIS LENGTH AND SIZE.
THE 7MM TOOL IS FOR BRAKE WORK AND IS ONLY 1 INCH LONG.
YOU JUST HIT THE JACKPOT.

Hazet Quality Tools 28.99

Assembly Tool special steel, with T Handle,for mounting and dismounting the draw spring of hand brake shoese.g. on MERCEDES BENZ passenger cars with rear disk brakes

T.D.C. Tool 0.00
Top Dead Center Tool
Number 2588 1 Belt Changing Tool.
Should be used with 2588 2 and 2588 3. Call for more info.
High Quality Tool Made in Germany.
read more:

Phoenix Bleeding & Flushing 0.00
The Phoenix Injector is the only tool in the world capable of performing ALL bleeding and flushing methods: Pressure, Vacuum, Bench, and Reverse Fluid Injection or RFI . RFI is the patented process of injecting fluid at lowest point in the hydraulic system, thereby allowing fluid and air bubbles to naturally rise back to the master cylinder reservoir.
As a brake and clutch bleeding technique, RFI opens up many problem solving doors that were previously unavailable. RFI , with the proper adapters and procedures, will allow a technician to bleed difficult systems in under 20 minutes or bench bleed a master cylinder, perfectly, in three minutes. CALL OR EMAIL
Read all about itClick Here
read more:

12 Pack Air Tool Oil 19.99
12 Pack Air Tool Oil.
Specially Formulated for use in all piston type and rotary air tools, as well as in line air lubricators. Prevents rust formation while providing positive lubrication for smooth starting and longer tool life. Assures maximum performance by dissolving gum and sludge that cut down tool speed and reduce power output. ( Marvel 12 Pack)
read more:

Press tool 401 0.00
High Quality German Made
Volkswagen Press Tool for assembly work.
Original Factory Tool.
read more:

Volkswagen Door Tool 9.99

T10011Volkswagen Door Tool triple Square 4
This is the correct tool for the job
New Beetle Tool This tool is used for R & R of door handle screws.Applicable: 1998 & newer VW Golf, Jetta, Passat & New Beetle....possibly other VW Audi.
This tool is a high quality item you will like.

End Play Kit 00
This tool has isdesigned to measure the end play movement
of the VW crankshaft without the use of a dial indicator.
All that is necessary is a feeler gauge set and this tool.
With the tool bolted to the end of the case, the feeler guage
measures the gap created by the end play.
The taking of this end measurement is necessary whenever a VW engine is rebuilt
to prevent the rear main bearing from seizing up.
A must for rebuilding one engine or many,
this tool works on all air cooled VW engines and Porsche 912 & 914 models.
read more:

BMW Radio Tool 15.00

Very popular BMW Radio Removal Tool.
Pentagon shaped tool with 5 Sides.
The overall length of this tool is 3 5/8 inches.
Applicable: Most BMWs.
Including E38 E39 7 Series etc...
This tool is used to release anti theft radio mounts.

7 Way Crimping Tool 8.99
7 WAY CRIMPING TOOL
Wire cutter, terminal crimper & wire stripper in one handy tool
Black anodized finish with insulated hand grips
Crimp slot on end of tool secures most ignition terminals including "W" type, right angle and "High Tower" terminals
Crimps 7mm to 8.5mm ignition wire
Works with 10 22 gauge solderless terminals
read more:

Klein Tool Bag 94.50
Klein Tool Bag
Number 5002 20
20" Tool Bag, No. 8 natural canvas with vinyl 20" (51 cm) 6" (15 cm) 15" (38 cm)

Klein offers a full line of Tool Bags. With the addition of two 20" bags you can now carry more tools and products. The 5003 series has shoulder strap mounts for use with the new shoulder strap. The canvas tool line has tool bags in lengths of 16" (8 interior pockets), 18" (10 interior pockets) and the new 20" (14 interior pockets) with choices in either leather or vinyl bottoms. Now carry all of your tools the most convenient way for you!
read more:

Klein Tool Bag 89.99
Klein Tool Bag
Number 5003 16
16" Tool Bag, No. 8 natural canvas with leather 16" (41 cm) 6" (15 cm) 14" (36 cm)

Klein offers a full line of Tool Bags. With the addition of two 20" bags you can now carry more tools and products. The 5003 series has shoulder strap mounts for use with the new shoulder strap. The canvas tool line has tool bags in lengths of 16" (8 interior pockets), 18" (10 interior pockets) and the new 20" (14 interior pockets) with choices in either leather or vinyl bottoms. Now carry all of your tools the most convenient way for you!
read more:

Spark Plug Boot Tool 32.99
Spark Plug Boot Tool
Due to restricted space the T10029 will install the spark plug boot properly.
VW and Audi spark plug boots designed to seal and increase contact between the spark plug and spark plug wire.
With the increased seal and location of the boot,
this tool has been made to access and remove the spark plug boot.
Tool is approximately 10 inches (250mm) long.
Used to pull off the spark plug socket...SOME APPLICATIONS INCLUDE: 2.8 2.9L VR6 engines
VW Golf, Corrado and Passat.Also Audi 80, 100, A4, A6 with 2.6 and 2.8L V6 engines.
This is the correct tool for the job.You will most likely find OLD number 3277 or 3277A in your manuals but
T10029 is the CORRECT current Volkswagen Audi Tool number. 3277 is and old number and Volkswagen calls this a SPARK PLUG CONNECTOR TOOL.
read more:

7 in 1 Tool 8.50
7 in 1 TOOL
Includes Wire looper, steel wire cutter,
copper wire cutter, wire stripper,
crimping tool, hose clamp plier and inch/metric scale!
read more:

You Searched for

brake tool

Trade Links With ZDMAK