valve wrench hex sockets 22mm tool 32mm wrench -- mmk4mkt

36mm Flare Wrench 42.50
Special 36mm Flare Wrench like vw 179.Oil Line 12 Point Wrench for servicing Oil Lineson most 1977 and Later Porsche 911 and 944 Turbo.This tool is also used for adjusting rear suspension heighton 77 and Newer Porsche 911and for camber on most late model Volkswagen Bug.
read more:

Ferrari Magnetic Wrench 29.99
17mm Magnetic Box V WrenchUsed for securing the top engine bolts from rotatingduring R&R of motor from transmission.Applicable: Porsche, VW and Ferrari modelsusing 17mm connecting bolts with a Hex Head
read more:

Relief Valve Tool 30.50
P236 Pressure Relief Valve Extractor Extractor the proper extraction of the from engine case. All Porsche VW Boxer 4
read more:

Valve Adjustment * Deep Offset Wrench 5.99
German MadeDeep Offset 12 Point Spanner.This Exact item is no longer available from Germany.PORSCHE VW VALVE ADJUSTMENTTYPE 1, 2, 3 and 4 VOLKSWAGEN
read more:

32mm Open End Thin Wrench 19.99

Long 32mm Thin Wrench
ON SALE

36mm Open End Thin Wrench 19.99

Long 36mm Thin Wrench
ON SALE

92mm Oil Wrench Socket 38.00

92mm Oil Filter Wrench
Will fit all Mann Knecht filters that require (92mm) and 15 inside flats.
Original Factory Tool Made in Germany. Size 92mm.
With outer (top) square drive size 12.5mm = 1/2 inch for ratchet or socket, or use the outside hex 27mm with a wrench.
15 point (inside flats or flutes).
Excellent high quality tool.
This tool will fit many (92mm) Volkswagen Audi Diesels.

Ajustable Pin Wrench 35.00

Universal Ajustable Face Pin Wrench.
Available sizes:2.5mm through 8mm. Call or email.

Carburetor Wrench 20.90

Carburetor Base Wrench 10mm x 12mm 12Pt box, thin head.

Female Torx Wrench Set 39.99

Female 5 Piece Set *
Torx Box Wrenches
Sizes included:
E6 X E8, E10 X E12, E14 X E16, E18 X E20, E22 X E24,
polished chrome.

Honda Toyota Nissan Tool 45.95

12mm Jam Nut Valve Adjustment Tool
Designed for a wide variety of cars with 12mm jam nut valve adjustment screws.
This two in one tool has a window in its socket so the technician can see the position of the screwdriver blade holding the
adjustment screw as the jam nut is tightened.
This visual contact in addition to the feel of holding the screwdriver The unique handle pivots from one side to the other, so the window is always visible.

Honda Valve Adjustment 45.95

10mm Jam Nut Valve Adjustment Tool
Designed for a wide variety of cars with 10mm jam nut valve adjustment screws.
This two in one tool has a window in its socket so the technician can see the position of the screwdriver blade holding the
adjustment screw as the jam nut is tightened.
This visual contact in addition to the feel of holding the screwdriver The unique handle pivots from one side to the other, so the window is always visible.

Long Thin Wrench Set 2 24.99

"Long" Pattern Thin Wrenches
Set of Two (2)
One of each size: 36MM and 32mm
Brand New "Long Thin Wrenches"
Many applications for these two tools,
especially for European cars.
Overall length of 15 inches.
Thickness of each wrench is 1/4" (6.35mm)
Some applications include:Mercedes and BMW R&R of fan clutch hub nut.
Porsche 32mm used for R&R of tie rods Model 911 Turbo, 89 76
36mm Needed for proper adjustment of rear ride height 911 , 89 77 etc...

Mazda Wrench Set 49.50

2610 Used for the proper R&R of fan clutch nut. Kit includes (1) 36mm and (1) 58 mm spanner wrench 1/2 Drive.
Applicable: Ford 2.8L, 2.9L, 3.0L, 4.0L, 4.9L.
Wrenches are used in conjunction with a breaker bar or ratchet.

Metric Wrench 4 Piece Set 62.50

Spanner Wrench Set needed for R&RThis 4 pack set includes (1) each of the following wrench sizes:27mm, 30mm, 32mm, 36mm. Some pplications include: Porsche models 911, 930, 914 6, 944, 968. This is a German Car Specail * This set is great for the European Automotive Technician. Very Handy Tools!

Nissan Valve Tools 27.99

For overhead camshaft engines using spacer shims.
This unique tool has been designed to allow for easy valve adjustement on all NISSANS, and many other overhead camshaft engines using spacer shims for valveadjustment in operation.

Oil Filter Wrench 14.99

Oil Filter Socket
For removing the plastic housing on cartridge type oil filters.
86mm 16 Flute 3/8 Drive size.

Pin Wrench Socket 27.50

Used for R&R of rear axle bearing nut.Applicable: All Subaru 4WD models. Please note: Excluding Justy

Special Open Socket 22mm 25.00

On Sale *
22mm Special TubeSocket
1.) Used for securing the Strut tower retaining nut of most European models (crucial when adjusting tension of front shocks). The 2/3 open side walls of this socket allows for easy access of an adjusting wrench. (normally 7mm Allen Hex Wrench)
2.) R&R of Oxygen Sensor.
Also for R&R of some Mercedes Diesel injectors ( OM604, 605 & 606).
Details: For removing and installing front strut unit on VW Golf up to 1988, Jetta up to 87, Scirocco, Audi 80 and Golf 3 from 1993 newer, Passat from 88 and newer, Audi 100, 200 Coupe and Quatro.
This tool is often used in conjunction with a 7mm hex wrench.
Clickhere for a picture of the tools in action: 

Special Socket 00

This special socket is for most 1986 and later fuel injected Honda and Acuras.
It has been designed to easily remove and install the specialty shaped banjo bolt
used to attach the fuel line to the fuel filter. In operation, this socket fits completely over the head
of this odd shaped banjo bolt for 360 of contact.
This allows a firm grip on this "often very tight" banjo bolt and eliminates the possibility
of stripping the minimal flats provided on this O.E. fitting when using a 17mm open end wrench.

Split Socket 9.99

Deep Split Socket size 7/8
Removes and Installs Oxygen Sensors onMany Domestic and some Imports. Special Socket with slotted cutout for clearance of wire harness.Provides proper depth to fit over the sensor.Use with 1/2 square drive or wrench end.
Provides adequate depth to fit over sensor. Heat treated alloy steel.

Thin Wrench 32 X 36mm 29.99

Thin Wrench Number 1032X36T Thin Wrench 32 X36mm with an 8mm overall thicknessand an overall length of 12 inches for proper leverage.Many applications for this handy thin wrench

Toyota Bonus Set 37.99

ZDMAK SPECIAL DEAL
Headbolt tool and Valve tools...
First Item: Valve tool designed to allow for easy valve adjustment on most Toyota overhead cam engines using spacer shims for valve adjustment. In operation, the tip of the pliers pushes between the spacer shim and the camshaft as the pliers are squeezed close. This action moves the shim and its valve lifter down from the camshaft lobe. In the down position the separate wedge tool is placed between the valve lifter ledge and the camshaft. This wedge tool then maintains a gap between the shim and the camshaft as the pliers are removed. The spacer shim can then be removed through this gap and replaced with one of the correct thickness. Works especially well with 3S FE and 3S GELC Toyota DOHC.Toyota number 09248 55040For Camry, Sienna, Avalon, Solara, Supra, 4Runner, MR2, Previa, Paseo, Tacoma, Tercel, T100, Celica.Packaged as shown with pliers and spacer wedge. Does not work with Land Cruiser 1993 1997 and Lexus LX400 1994 199

PLUS * Toyota Headbolt Tool
12 Point (Triple Square) Socket.
This item is called XZN (style) and is very hard to find. 1/2 Drive Socket is 100mm long, for easy access to hard to reach headbolts.

Toyota Locknut Tool 19.99

Toyota front wheel bearing design change requires a new procedure to remove the locknut: The free wheel hub assembly locknut is on the inside, so the hub must be removed to gain access. This wrench has a four pin design accommodates the four holes in each locknut, which prevents slippage under high torquing requirements. Works on 1995 and newer Tacoma, and 1996 and newer T100 and 4Runner.

Toyota Master Set 99.99

ZDMAK THREE ITEM MASTER KIT FOR TOYOTA
Cam Tool Plus Headbolt tool Plus Valve Tool
You can read about all three of these items on this page (above). This set includes item numbers TOY4VT, plus TOYHB and 2705.

Toyota Valve Adjustment Tool 19.99

This tool has been designed to allow for easy valve adjustment on most Toyota overhead cam engines using spacer shims for valve adjustment. In operation, the tip of the pliers pushes between the spacer shim and the camshaft as the pliers are squeezed close. This action moves the shim and its valve lifter down from the camshaft lobe.In the down position the separate wedge tool is placed between the valve lifter ledge and the camshaft. This wedge tool then maintains a gap between the shim and the camshaft as the pliers are removed. The spacer shim can then be removed through this gap and replaced with one of the correct thickness.
Works especially well with3S FE and 3S GELC Toyota DOHC.
Toyota number 09248 55040
For Camry, Sienna, Avalon, Solara, Supra, 4Runner, MR2, Previa, Paseo, Tacoma, Tercel, T100, Celica.
Packaged as shown with pliers and spacer wedge.Does not work with Land Cruiser 1993 1997 and Lexus LX400 1994 1997

Universal Valve Spring Compressor 68.50

This set is used to remove and install the valve spring
with the cylinder head still on the engine and in the car,
or with the cylinder head removed.
The multi point adjustable base of this tool bolts securely to the headwhile the adjustable lever mechanism pivots from the bar thus compressing the spring.Quick removal and installation of the spring retaining keepers is then easily accomplishedthrough the large openings on both sides of the compression tube.This set comes complete with an easy grip handle and a storage tray.

Valve Plier 19.99

Valve Stem Seal PliersItem P10 218AVTool is used for the proper extraction of stem seals.The inside grooves on the tips of this Plier allows the firm gripof both O.E. and aftermarket seals Applicable: Most Overhead Cam engines.

Valve Plier Set of 2 37.00

Valve Stem Seal Pliers and Shim Plier Set Includes: Valve Plier (top) is used for the proper extraction of stem seals.The inside grooves on the tips of this Plier allows the firm gripof both O.E. and aftermarket sealsApplicable: Most Overhead Cam engines. PLUS:Shim Plier Used for proper R&R of valve adjusting shims. Applicable: Overhead Cam engines with adjusting shims.

Valve Shim Plier 22.95

Valve Shim Tool P10 208XUsed for proper R&R of valve adjusting shims. Applicable: Overhead Cam engines with adjusting shims.

13 x 14mm Drain Plug Wrench 72.98

13 x 14mm Drain Plug Wrench.
World Class Hazet Tools Made in Germany!

13mm WRENCH 39.75

13MM T WRENCH USED TO REMOVE AND INSTALL ALTERNATOR BRACKET/COOLING PUMP ON DIESEL ENGINES

17 x 17 Injection Wrench 59.50

Double Ended Flare Nut Box Wrench Size 17 x 17mmOverall Length 241mm (9.5 inch)For injection pipes on Volkswagen / Audi This tool will help you when you remove and install the fuel lines from the injection pump and the injectors themselves.For TDI: You will still need to torque the 17mm fittings down to spec, but this tool will make taking the fittings off a snap, as well as putting them back on.This is a Factory Tool Made in Germany

19mm Suspension Strut Socket 59.95

Special 19mm Tube SocketUsed for securing the Strut tower retaining nut of select European models (crucial when adjusting tension of front shocks). The 2/3 open side walls of this socket allows for easy access of an adjusting wrench. (normally 7mm Allen Hex Wrench)For removing and installing front strut unit on VW Audi 19mm nut.This tool is often used in conjunction with a pin wrench / allen wrench or both.

2 Piece Socket Set 32.99

22mm Special Tube Socket 4491A Plus Pin Wrench VW524
Used for securing the Strut tower retaining nut of most European models
(crucial when adjusting tension of front shocks). The 2/3 open side walls of
this socket allows for easy access of an adjusting wrench.
(normally 7mm Allen Hex Wrench)
Also for R&R of Oxygen Sensor.

VW524 Pin Wrench Socket with 1/2" drive. This tool is used for R&R of
grooved ring retaining nut on strut tower of front shock absorber.
Also used for adjusting power steering gear on VW Jetta, Golf, GTI.

21mm Suspension Strut Socket 59.95

Special 21mm Tube SocketUsed for securing the Strut tower retaining nut of select European models (crucial when adjusting tension of front shocks). The 2/3 open side walls of this socket allows for easy access of an adjusting wrench. (normally 7mm Allen Hex Wrench)For removing and installing front strut unit on VW Audi 21mm nut.This tool is often used in conjunction with a pin wrench / allen wrench or both.

22mm Socket plus 7mm Allen Wrench 26.99

2 Piece set
22mm Special Tube Socket 4491A plus 7mm Allen WrenchUsed for securing the Strut tower retaining nut of most European models(crucial when adjusting tension of front shocks). The 2/3 open side walls ofthis socket allows for easy access of an adjusting wrench. (normally 7mm Allen Hex Wrench) (This socket can also be used for R&R of Oxygen Sensor.)
Plus a 7mm Allen Wrench.The Allen wrench is 7mm and is 7.5 inches Long.

22mm Strut O/2 Sensor Socket 18.99

On Sale 22mm Special Tube Socket 1.) Used for securing the Strut tower retaining nut of most European models (crucial when adjusting tension of front shocks). The 2/3 open side walls of this socket allows for easy access of an adjusting wrench. (normally 7mm Allen Hex Wrench) 2.) R&R of Oxygen Sensor.
Also for R&R of some Mercedes Diesel injectors ( OM604, 605 & 606). Details: For removing and installing front strut unit on VW Golf up to 1988, Jetta up to 87, Scirocco, Audi 80 and Golf 3 from 1993 newer, Passat from 88 and newer, Audi 100, 200 Coupe and Quatro. This tool is often used in conjunction with a 7mm hex wrench.Clickhere for a picture of the tools in action:

3 Piece Oil Service Set 29.50

3 Piece Oil Service Set includes sizes 36mm, 32mm and 27mm 6 point sockets. (36 mm for M52, M60, M62, M70, M73 engines) Special 36mm Oil Filter Wrench Removes and installs filters on BMW Mini Cooper. The low profile socket fits 36mm fuel and oil filters. The low profile socket works in confined spaces. 3/8 in. drive Not for use with an impact wrench. BMW Mini Cooper, BMW M52 6 cylinder, BMW M60 8 cylinder, BMW M70 12 cylinder.Mercedes Benz diesel engines: OM604, OM605, OM606 (1995 W124 E300 diesel, 96 97 W210 E300 diesel, 1998 E300 turbodiesel).Same as Mercedes tool number: 606 589 01 09 00VW Volkswagen VR6 Also for Ford Truck 6.0L 03 04
Plus you get the 32mm and the 27mm.
27 mm for R&R of oil filter cartridge element.App.: M163 (Class A), C230 (Compressor)
32 mm for R&R of Oil filter cartridge element.Applicable: Opel Astra, Corsa, VW Passat, Audi.

3 Piece Strut Set 34.99

On Sale! 22mm Tube Socket Plus Pin Wrench number VW524, Plus 7mm Allen Wrench
Tools used for securing the Strut tower retaining nut of most European models
(crucial when adjusting tension of front shocks). The 2/3 open side walls of
this socket allows for easy access of an adjusting wrench.
(normally 7mm Allen Hex Wrench)
Also for R&R of Oxygen Sensor.

VW524 Pin Wrench Socket with 1/2" drive. This tool is used for R&R of
grooved ring retaining nut on strut tower of front shock absorber.
Also used for adjusting power steering gear on VW Jetta, Golf, GTI.

3 total pieces in this set: 2 Sockets and 7mm Allen Wrench.
The Allen wrench is 7.5 inches long.

3212 Ajustable Pin Wrench 35.00

Ajustable Pin Wrench Made in Germany
APPL: REMOVE INSTALL: 1) VISCOUS CLUTCH RADIATOR FAN
2)CENTRAL HYDRAULIC PUMP PULLEY

32mm Oil Filter Wrench 35.99

2169 32 Oil Filter Wrench, steel grey,square drive nominal size 10mm = 3/8, resp.
outside hexagon 27 mm14 point s 74.4 mm 6 point s 32 mmOPEL Astra, Corsa, VW Passat, AUDI

Buy seperately or buy in a set of 3 sizes 27, 32 and 36mm.

36mm Open End Thin Wrench 35.00

Extra Long 36mm Thin Wrench Number 1032TThis wrench has a thickness of 8mm.We have other 32mm thin wrenches on this website,but at 20 inches long and good quality, this is the wrench we recommend.

ADJUSTING TOOL 17.50

FACTORY TOOL USED FOR INSTALLATION AND BASIC SETTING OF THE IGNITION DISTRIBUTOR ON THE 20 VALVE ENGINE

Audi Info and Timing 0.00

There are three main Cam bars for timing.
3391, 3243 and T40005
(T40005 is for V 8)
Notice the tool number 3242 this is the T.D.C (TOP DEAD CENTER) Pin
This pin goes with 3391 or 3243.
Type your selection in the search or you can find the tools in this Audi section.
Feel free to call me or email. I will try to assist you.
Please note:
In order to make your selection you must determine if your vehicle is 2 valve per cylinder or 5 valve per cylinder or V8. Example = Notice tool number 3391 says it is for 5 valve. The 3243 is for 2 valve per cylinder.

Bar and Pin for 5 Valve 139.50

Camshaft Timing Tool Set (2)
TOOL REF 3391
Cam/Bar Holder
V6 / 5 valves per cylinder/
used for the crucial task of securing both engine banks/
camshafts at T.D.C when replacing the timing belt/
to properly align camshaft during timing belt change /head assembly work.
Applicable VW Audi V6 5 Valve 1998 2003
Cam/Bar Holder Not Applicable 3.0 2002 4 cam.

TOOL REF 3242
Crankshaft T.D.C. Lock Pin
Holds crankshaft at top dead center
For installing or removing toothed belt /flywheel drive plate.
T.D.C. Pin Applicable: A4 A6 Volkswagen Passat
Engine Applicable: Volkswagen AHA BDP ATQ BCY
Audi AAH AFC ATQ AHA AKB ART AUX BFM BHF BNK BSB AVK AWN AYS BBD BCY & BEL
T.D.C. Pin Not Applicable 3.0 V6Please note: 3391 for 5 valves per cylinder.

Best Quality Thin Wrench Set 68.50

Set of 2 Long Pattern Thin Wrenches
German Car Special *
One of each size: 36mm and 32mm
Overall length of 20 inches.
Thickness of each wrench is 8mm.Tools will come with a handle grip on each.
Many applications for these two tools.

BigMak Timing Kit 196.00

Master Kit
Set of 6 Tools
Including Dial Indicator

Set Includes:
3032 Injection Pump Tool Puller used for the proper extraction of injection pump drive gear. Applicable: Volvo and VW / Audi diesels Excluding TDI
PLUS: VA6015 Holder used for accurate adjustment of Bosch diesel injection pump.
Plus: 2065A Diesel Camshaft Locking Plate Tool
PLUS: 2064 Lock Pin for Diesel.
Plus the Pin Wrench (made in Germany) for easy adjustment of Camshaft spur belts (toothed belt) on idler Pulleys with Pin holes. This wrench with its protruding pins, grabs the center of the idler pulley and rotates around the off center retaining bolt allowing for easy belt tension adjustment. Tension Pulleys on 4 cylinder Golf, Jetta, Passat and Corrado. Audi 80.
Plus Dial Indicator

BRAKE TOOL 3343 0.00

ADJUSTMENT WRENCH USED WHEN ADJUSTING PARKING BRAKE. (REPAIR GROUP 46)

Cam Bar and Pin for 2 Valve 139.50

Camshaft TimingTool Set (2)
TOOL REF 3243
Cam/Bar Holder 2 valves per cylinder/
Used for the crucial task of securing both engine banks/
camshafts at T.D.C when replacing the timing belt/
to properly align camshaft during belt change head assembly work.
Applicable Audi 90 A6 A4  94 97 AFC Engine

TOOL REF 3242
Crankshaft T.D.C. Lock Pin
Holds crankshaft at top dead center
For installing or removing toothed belt /flywheel drive plate.
T.D.C. Pin Applicable: A4 A6 Volkswagen Passat
Engine Applicable: Volkswagen AHA BDP ATQ BCY
Audi AAH AFC ATQ AHA AKB ART AUX BFM BHF
BNK BSB AVK AWN AYS BBD BCY & BEL
T.D.C. Pin Not Applicable 3.0 V6

Please note: 3243 for 2 valves per cylinder. 

You Searched for

valve wrench

Trade Links With ZDMAK