transmission tool SARASOTA transmission tool interior tool -- mmk4mkt

Benz Transmission Tool 49.95

Transmission Linkage Bushing Installer / Tool for Mercedes Benz with automatic transmissions, virtually all later models, some Ford and other vehicles needing this tool to easily and safely push TOUGH nylon bushings into place. Works on different bushing sizes. The design of this tool was initiated by Mr. Robert Allen and has recently been modified and perfected. Robert Allen is a long time Mercedes Benz Master Technician with 26 years of experience.

Transmission Spec Guide 37.99
2004 OEM Transmission Spec
Guide<br>OEM 2004 Transmission Spec Guide.
Provides vechile specific information
pertaining to fill capacities, and OEM
recommended refill fluids for most cars and light trucks.
read more:

Disconnect Tool Set 39.99
8pc Fuel & Transmission Line Disconnect Tool Set
Anodized aluminum Separate fittings on fuel lines,
fuel filters & fuel tank return lines.
Sizes:1/4in, 5/16in, 3/8in & 1/2in
oil cooler line disconnect tools. Separates automatic transmission oil cooler lines
on Ford Taurus And Escort with AXOD and ATX transmissions.
Fuel line disconnect tool allows damage free fuel line quick connect coupler release.
Fits any 5/16in or 3/8in fuel line found on GM, Ford or Chrysler cars.
Ford fuel line coupling tool provides easy, damage free fuel line separation
Works on 1990 and newer Ford Ranger and Explorers with 4.0L, 6 cylinder engines.
Disconnect tool allows quick separation of quick connectors found on radiators, transmissions and power steering lines.
Release the fingers on transmission to radiator oil cooler line easily without damage to the hose or connector. Works on 1986 and newer Ford Tauruses and Mercury Sables with an AXOD, AOD or ATX tansmission. Quick disconnect coupler tool slides down the line and into the connector separating the clip apart without damaging the quick connect seals allowing removal of clip. Works on late model Ford and GM vehicles.
read more:

Toyota Transmission Tool 19.50

Puller used for the proper extraction of front counter shaft bearing.Applicable: Toyota transmission L52 81 83 5speed /4WD

Toyota Transmission Tool 28.00

Puller used for the proper extraction of rear counter shaft bearing and 5th gear. Applicable: Toyota transmission L52 81 83 5speed 4WD.

Transmission Adaptor 59.95

Transmission Adaptor
Converts floor jacks into transmission jacks Fits all jacks with 1 5/32" removable saddle shaft Tilts forward and back and includes safety chain.

Triple Square Socket for Transmission 28.50

Drain Plug Socket:This is a Special Tamperproof * Transmission Drain Plug Socket.Triple Square ( 12 Point XZN ) Same as Volkswagen Tool 3357.For Porsche Boxster and Audi A4 A6 and Passat.This is an excellent "Stronger One Piece" design.

Sleeve Drive Impact Sockets 0.00
Sleeve Drive Impact Sockets.An O ring inside Sleeve Drive optimizes the perfect fit of extension bars and sockets on the anvil to the effect, that the exactness of the required torque given by the pulse tool is generally improved. Further, the Sleeve Drive avoids the direct transmission of vibrations on the pulse tool and finally on the operator.
read more:

THRUST PAD 68.50

USED IN REPAIR OF 01E TRANSMISSION 02J TRANSMISSION
(Pressing taper roller bearing outer race in gearbox)

Triple Square Drain Plug Tool 49.50

This is a Special Tamperproof * Transmission Drain Plug Socket. Triple Square ( 12 Point XZN 16) Same as old Volkswagen Tool 3357. (Number 3357 is still found in many/most manuals for this job)
Applicable Porsche Boxster and Audi A4 A6 and Passat. This is an excellent high quality tool Made in Germany. Plug not included, picture is for reference only.

Volvo Clutch Tool 6.99

Volvo Clutch Alignment Tool (Diesel D24)Clutch tool is extremely durable long lasting and inexpensive. These tools can be used over and over again.A must for clutch repair shop, clutch specialist, transmission repair shops, automotive stores, school shop classes, clutch resellers, foreign and domestic repair shops.

Set of 6 Steering / Transmission Tools 00
Item5965VA1DescriptionAssortment of 11 steering and transmission tools
read more:

17mm Drain Plug Tool 12.00

17mm HexSocket
Check It Out...Specially for R&R of gearbox drain plugs.
This tool is 3/8 Drive
Applicable: Designed for VW transmission drain plugs.
Also for a wide variety of European Vehicles.

Drainplug Tool on Sale! 14.99

Drain Plug Socket
This is a Special Tamperproof Transmission Drain Plug Socket.
Triple Square ( 12 Point XZN )
Same as Volkswagen Tool 3357.
For Porsche Boxster and Audi A4, A6 and Passat.

Clutch Cable Tool 26.00

NUMBER 3151Clutch Cable Fixture Volkswagen Factory Tool Made in GermanyUsed to position the self adjusting clutch cable at transmission during assembly(Self Adjusting Clutch) GOLF JETTA SCIROCCO 1985 and Newer

BMW Clutch Tool 6.99

BMW Clutch Alignment Tool
The ZDMAK clutch tools are extremely durable
long lasting and inexpensive.
These tools can be used over and over again.
A must for clutch repair shop, clutch specialist, transmission repair shops,
automotive stores, school shop classes, clutch resellers,
foreign and domestic repair shops.Read more about this toolClickHere

Best Quality XZN Size M16 49.50

This is a Special Tamperproof Transmission Drain Plug Socket. Triple Square ( 12 Point XZN 16) Same as old Volkswagen Tool 3357. (Number 3357 is still found in many/most manuals for this job)
Applicable Porsche Boxster and Audi A4 A6 and Passat. This is an excellent high quality tool Made in Germany.
* Plug not included, picture is for reference only.

Tri Square Drain Plug XZN 49.50

Headbolt & Drain Plug Socket Set 2 28.00

Drain Plug Socket
Plus Heabolt Tool
Details: Tamperproof Transmission Drain Plug Socket.
Triple Square (12 Point XZN)
Same as Volkswagen Tool 3357.
For Porsche Boxster and Audi A4, A6 and Passat.

Plus Audi Headbolt Tool
Number T10070 Headbolt Tool 1/2 Drive Used to remove and install cylinder headbolts. Volkswagen Audi V6 and 4 Cylinder 5 valve engines. Long pattern for deep located screws. Drive size is 1/2 inch. Many Audi Headbolts have switched to the new pattern. This will fit into the new special screw profile. Set of 2 Audi Tools from ZDMAK

Dont hesitate...these are BOTH the CORRECT tools for the job!

Spreader 28.99

SPREADING TOOL5TH GEAR LOCK PLATE 020 TRANSMISSION Ref: Volkswagen Tool 3097

Super Strong 30 X 32mm 27.50

Big Sucker! Metric Thin Wrench 32 x 36mm with just over a 1/4 inch (8mm) thickness and overall length of 13 1/2 inches for proper leverage. This is a STRONG BEEFY tool you will like. A very good tool for the experienced technician and should be one of the first items a new tech will purchase. All European auto techs need thin wrenches and this is one the best values on the market and it is a heavy duty tool that will pay for itself very quickly. For use on Oil Lines, Fan Clutch work, A/C and Transmission work. These thin wrenches are becoming more and more necessary every day. Some applications include: Mercedes and BMW R&R of fan clutch hub nut. The 32mm is used for R&R of tie rods Porsche model 911 Turbo, 1976 89and the 36mm is needed for proper adjustment of rear ride height Porsche 911 1977 89 etc...This item is on sale now.

BMW Cluth Pilot 6.99

Headbolt & Drain Plug Socket Set 28.00

TWO TOOLS!!!
Audi Headbolt Tool (LEFT)Number T10070 Headbolt Tool 1/2 Drive Used to remove and install cylinder headbolts. Volkswagen Audi V6 and 4 Cylinder 5 valve engines. Long pattern for deep located screws. Drive size is 1/2 inch. Many Audi Headbolts have switched to the new pattern. This will fit into the new special screw profile. Plus Drain Plug Socket (right)Special Tamperproof Transmission Drain Plug Socket.Triple Square (12 Point XZN)Same as Volkswagen Tool 3357.For Porsche Boxster and Audi A4, A6 and Passat. Dont hesitate...these are BOTH the CORRECT tools for the job!

Puller 3042 89.50

REMOVE TRANSMISSION HOUSING SEPARATE TRANS. CASE FROM GEAR CARRIER HOUSING. 5 SPD 020 FACTORY TOOL MADE IN GERMANY

Big 30 Inch Extension 39.75
Extra Long 30 inch Impact
Universal Extension Bar
3/8 Dr. male end (spring loaded) universal end, 1/2 inch female Drive heavy bar to reduce torque flexing. A GREAT tool for transmission work etc.
Durable, spring loaded impact universal joints featuring the new safety ring to prevent any movement of the pin during the impacting process. Extraordinary value for the money. Most extensions you will find do not have a U joint or do not come in this extra long size with a 3/8 end. Extremely handy for the european auto mechanic.
read more:

Hex Socket 27mm 14.99

Hex Socket 27mm with 3/8" Drive Special Tool 27mm hex Used for R&R of 27mm "female" hex timing plug of engine bell housing and R&R of 27mm female hex transmission access cover. Picture is not to scale. Applicable: All VW/Audi water cooled models '75 and newer.

Triple Square Socket 3357 14.99

Drain Plug Socket
This is a Special Tamperproof Transmission Drain Plug Socket.
Triple Square ( 12 Point XZN )
Same as Volkswagen Tool 3357.
For Porsche Boxster and Audi A4, A6 and Passat.

T.D.C. Tool 0.00
Top Dead Center Tool
Number 2588 1 Belt Changing Tool.
Should be used with 2588 2 and 2588 3. Call for more info.
High Quality Tool Made in Germany.
read more:

12 Pack Air Tool Oil 19.99
12 Pack Air Tool Oil.
Specially Formulated for use in all piston type and rotary air tools, as well as in line air lubricators. Prevents rust formation while providing positive lubrication for smooth starting and longer tool life. Assures maximum performance by dissolving gum and sludge that cut down tool speed and reduce power output. ( Marvel 12 Pack)
read more:

Press tool 401 0.00
High Quality German Made
Volkswagen Press Tool for assembly work.
Original Factory Tool.
read more:

Volkswagen Door Tool 9.99

T10011Volkswagen Door Tool triple Square 4
This is the correct tool for the job
New Beetle Tool This tool is used for R & R of door handle screws.Applicable: 1998 & newer VW Golf, Jetta, Passat & New Beetle....possibly other VW Audi.
This tool is a high quality item you will like.

End Play Kit 00
This tool has isdesigned to measure the end play movement
of the VW crankshaft without the use of a dial indicator.
All that is necessary is a feeler gauge set and this tool.
With the tool bolted to the end of the case, the feeler guage
measures the gap created by the end play.
The taking of this end measurement is necessary whenever a VW engine is rebuilt
to prevent the rear main bearing from seizing up.
A must for rebuilding one engine or many,
this tool works on all air cooled VW engines and Porsche 912 & 914 models.
read more:

BMW Radio Tool 15.00

Very popular BMW Radio Removal Tool.
Pentagon shaped tool with 5 Sides.
The overall length of this tool is 3 5/8 inches.
Applicable: Most BMWs.
Including E38 E39 7 Series etc...
This tool is used to release anti theft radio mounts.

Ferrari Magnetic Wrench 29.99
17mm Magnetic Box V WrenchUsed for securing the top engine bolts from rotatingduring R&R of motor from transmission.Applicable: Porsche, VW and Ferrari modelsusing 17mm connecting bolts with a Hex Head
read more:

7 Way Crimping Tool 8.99
7 WAY CRIMPING TOOL
Wire cutter, terminal crimper & wire stripper in one handy tool
Black anodized finish with insulated hand grips
Crimp slot on end of tool secures most ignition terminals including "W" type, right angle and "High Tower" terminals
Crimps 7mm to 8.5mm ignition wire
Works with 10 22 gauge solderless terminals
read more:

Klein Tool Bag 94.50
Klein Tool Bag
Number 5002 20
20" Tool Bag, No. 8 natural canvas with vinyl 20" (51 cm) 6" (15 cm) 15" (38 cm)

Klein offers a full line of Tool Bags. With the addition of two 20" bags you can now carry more tools and products. The 5003 series has shoulder strap mounts for use with the new shoulder strap. The canvas tool line has tool bags in lengths of 16" (8 interior pockets), 18" (10 interior pockets) and the new 20" (14 interior pockets) with choices in either leather or vinyl bottoms. Now carry all of your tools the most convenient way for you!
read more:

Klein Tool Bag 89.99
Klein Tool Bag
Number 5003 16
16" Tool Bag, No. 8 natural canvas with leather 16" (41 cm) 6" (15 cm) 14" (36 cm)

Klein offers a full line of Tool Bags. With the addition of two 20" bags you can now carry more tools and products. The 5003 series has shoulder strap mounts for use with the new shoulder strap. The canvas tool line has tool bags in lengths of 16" (8 interior pockets), 18" (10 interior pockets) and the new 20" (14 interior pockets) with choices in either leather or vinyl bottoms. Now carry all of your tools the most convenient way for you!
read more:

Spark Plug Boot Tool 32.99
Spark Plug Boot Tool
Due to restricted space the T10029 will install the spark plug boot properly.
VW and Audi spark plug boots designed to seal and increase contact between the spark plug and spark plug wire.
With the increased seal and location of the boot,
this tool has been made to access and remove the spark plug boot.
Tool is approximately 10 inches (250mm) long.
Used to pull off the spark plug socket...SOME APPLICATIONS INCLUDE: 2.8 2.9L VR6 engines
VW Golf, Corrado and Passat.Also Audi 80, 100, A4, A6 with 2.6 and 2.8L V6 engines.
This is the correct tool for the job.You will most likely find OLD number 3277 or 3277A in your manuals but
T10029 is the CORRECT current Volkswagen Audi Tool number. 3277 is and old number and Volkswagen calls this a SPARK PLUG CONNECTOR TOOL.
read more:

7 in 1 Tool 8.50
7 in 1 TOOL
Includes Wire looper, steel wire cutter,
copper wire cutter, wire stripper,
crimping tool, hose clamp plier and inch/metric scale!
read more:

Valve Spring Tool & Bridge 142.50

Valve Tools (2)
Set including:Valve Spring Compressor Bar
Same as Volkswagen Tool Number VW 541/1
Used for R&R of valve spring or rocker armWith this tool the job can be done with the cylinder head on or off the car.Used in conjunction with tool BridgeApplicable: 924 / 944 VW AUDI 4 5 Cyl. VA6022Support Bridge Same as VW Tool 2036 Used for R&R of valve spring or rocker armUsed in conjunction with tool VW541/1Applicable: Model 924. VW / AUDI 4 5 Cyl.

Valve Spring Tool and Bridge 142.50

Valve Spring Tools Set including:VA6010Valve Spring Compressor BarSame as Volkswagen Tool Number VW 541/1Used for R&R of valve spring or rocker armWith this tool the job can be done with the cylinder head on or off the car.Used in conjunction with tool BridgeApplicable: 924 / 944 VW AUDI 4 5 Cyl. VA6022Support Bridge Same as VW Tool 2036 Used for R&R of valve spring or rocker armUsed in conjunction with tool VW541/1Applicable: Model 924. VW / AUDI 4 5 Cyl.

12 Pack 32 oz Air Tool Oil 64.99
32 oz 12 Pack MVL085
Specially Formulated for use in all piston type and rotary air tools, as well as in line air lubricators. Prevents rust formation while providing positive lubrication for smooth starting and longer tool life. Assures maximum performance by dissolving gum and sludge that cut down tool speed and reduce power output. ( Marvel 12 Pack)
read more:

BMW Center Cap Tool 8.99

BMW Center Cap Tool.Made in Germany
Tool used to remove and install center caps on several BMW.
Drive size is 17mm
Tool is 3 7/16 inch wide.
BMW NUMBER 36 13 1 180 626

Stubby 3/8 X 1/2 Ratchet 23.99
Short Pattern Double Drive 3/8 X 1/2
Flexible Head "Stubby" Ratchet
Comfortable rubber cushion grip handle Features 72 gear teeth for speed & durability Chrome vanadium steel construction.
Saves space in the tool pouch or tool box,
saves time looking for a tool
and saves money!
read more:

3 pc. Fold Up Tool Set 45.99

3 pc. Fold Up Tool Set
3 fold up tools all made of high alloy CVM steel, hardened, with a molded ergonomic handle. 7 tool PocketStar: Torx sizes: T7, T8, T9, T10, T15, T20, T25. 7 tool MagicRing Metric PocketStar: 2, 2.5, 3, 4, 5, 6 and 8mm. 9 tool MagicRing Inch PocketStar: sizes 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4 in
Satisfaction Guaranteed Made In Germany!

VW803 19.99
Sorry No Picture
FACTORY TOOL
In Stock Now!
Call if you need more info on this tool.
read more:

VW801 49.99

Sorry No Picture

FACTORY TOOL MADE IN GERMANY

In Stock Now!
Call if you need more info on this tool.
read more:

Power Lifter Pickup Tool 18.50
Pick up Tool 19 inch long with lift cap 1.5lbs.
read more:

VW273A 125.00

Sorry No Picture

FACTORY TOOL MADE IN GERMANY

In Stock Now!
Call if you need more info on this tool.
read more:

VW243 39.99

Sorry No Picture

FACTORY TOOL MADE IN GERMANY

In Stock Now!
Call if you need more info on this tool.
read more:

You Searched for

transmission tool

Trade Links With ZDMAK