Spreader Socket 18.99  | Spreader Socket Number 3424This tool is used on all A4 platform VWs including Golf,Jetta, and Gti, 337, 20a.e. GTI model year 1999 to presentTool is used any time the strut needs to be separated from the wheel bearing housingMost common would be changing/replacing struts, coil spring, or the entire strut assemblyYou would also use this tool when servicing the wheel bearingWhy do you need to use it?? you can not easily remove the strut from the wheel bearing housing without itThe wheel bearing housing clamps down very tightly on the strut assembly....even with the bolt removed the housing is still firmly clamped to the strut...this tool allows you to spread the housing where it is clamped on so that the strut can be removed.Basically this tool is a must have any time the strut or wheel bearing housingneeds to be removed from the above models. |
read more:
Set 3424 Plus 3078 79.99  | Set 2 TOOLS
Spreader Socket Number 3424This tool is used on all A4 platform VWs including Golf,Jetta, and Gti, 337, 20a.e. GTI model year 1999 to presentTool is used any time the strut needs to be separated from the wheel bearing housingMost common would be changing/replacing struts, coil spring, or the entire strut assemblyYou would also use this tool when servicing the wheel bearingWhy do you need to use it?? you can not easily remove the strut from the wheel bearing housing without itThe wheel bearing housing clamps down very tightly on the strut assembly....even with the bolt removed the housing is still firmly clamped to the strut...this tool allows you to spread the housing where it is clamped on so that the strut can be removed.Basically this tool is a must have any time the strut or wheel bearing housingneeds to be removed from the above models.
Plus 22mm Open Sidewall Socket number 3078
ANOTHER SUPERSET FROM ZDMAK! |
read more:
Set 3424 Plus 3077 79.99  | Set 2 TOOLS
Spreader Socket Number 3424This tool is used on all A4 platform VWs including Golf,Jetta, and Gti, 337, 20a.e. GTI model year 1999 to presentTool is used any time the strut needs to be separated from the wheel bearing housingMost common would be changing/replacing struts, coil spring, or the entire strut assemblyYou would also use this tool when servicing the wheel bearingWhy do you need to use it?? you can not easily remove the strut from the wheel bearing housing without itThe wheel bearing housing clamps down very tightly on the strut assembly....even with the bolt removed the housing is still firmly clamped to the strut...this tool allows you to spread the housing where it is clamped on so that the strut can be removed.Basically this tool is a must have any time the strut or wheel bearing housingneeds to be removed from the above models.
Plus 19mm Open Sidewall Socket number 3077
ANOTHER SUPERSET FROM ZDMAK! |
read more:
Set 3424 Plus 3186 79.99  | Set 2 TOOLS
Spreader Socket Number 3424This tool is used on all A4 platform VWs including Golf,Jetta, and Gti, 337, 20a.e. GTI model year 1999 to presentTool is used any time the strut needs to be separated from the wheel bearing housingMost common would be changing/replacing struts, coil spring, or the entire strut assemblyYou would also use this tool when servicing the wheel bearingWhy do you need to use it?? you can not easily remove the strut from the wheel bearing housing without itThe wheel bearing housing clamps down very tightly on the strut assembly....even with the bolt removed the housing is still firmly clamped to the strut...this tool allows you to spread the housing where it is clamped on so that the strut can be removed.Basically this tool is a must have any time the strut or wheel bearing housingneeds to be removed from the above models.
Plus 21mm Open Sidewall Socket number 3186
ANOTHER SUPERSET FROM ZDMAK! |
read more:
Strut Extractor 155.00  | This tool is used specificallyfor removal of Traction strut from TIE rod lever.(SAME AS BMW TOOL 312140)Applicable: Chassis E31, E32, E34 |
read more:
Puller Strut Tool 265.00  | Strut Remover For removing and installing or replacing left or right traction strut. For pressing control arm off steering knuckle, when replacing left or right control arm. Appl.: E38, E39, E52(Z8), E53(X5) |
read more:
STRUT ALIGNMENT LEVEL 29.99STRUT ALIGNMENT LEVEL
Use this level to restore a vehicles camber setting after strut repair or installation. Allows technician or customer to safely drive the vehicle before a more precise wheel alignment can be performed. Super strong magnet mounts on brake rotor, spindle or steering knuckle. Easy to use: (1)Place on vehicle before repair and zero the level. (2)Tighten the wing nut. (3)After the repair, push or pull on the strut until the level returns to the zero position.
read more:
MacPherson Strut Coil Spring Tool 54.50  | The Strutter2, MacPherson Strut Coil Spring Tool With acme threads and economically priced. virtually all Quickly and easily work on the MacPherson Struts found on virtually all modern domestic and imported vehicles. Features a one piece cold headed bolt made of chromium molybdenum alloy steel. The nuts are Grade 5. Use with impact wrench or hand tool ON or OFF the car.car. Contains complete instructions and safety kit. Not for use on any unusually large MacPherson Strut springs which have a coil outside diameter of over 6" or a wire diameter larger than 5/8". Do not use on General Motors "A", "C", "J" or "X" Body cars.
Acme threads for easy use and additional strength.
Clamshell packaging with a built in handle can be used to store the tool. |
read more:
19mm Suspension Strut Socket 59.95  | Special 19mm Tube SocketUsed for securing the Strut tower retaining nut of select European models (crucial when adjusting tension of front shocks). The 2/3 open side walls of this socket allows for easy access of an adjusting wrench. (normally 7mm Allen Hex Wrench)For removing and installing front strut unit on VW Audi 19mm nut.This tool is often used in conjunction with a pin wrench / allen wrench or both. |
read more:
21mm Suspension Strut Socket 59.95 | | Special 21mm Tube SocketUsed for securing the Strut tower retaining nut of select European models (crucial when adjusting tension of front shocks). The 2/3 open side walls of this socket allows for easy access of an adjusting wrench. (normally 7mm Allen Hex Wrench)For removing and installing front strut unit on VW Audi 21mm nut.This tool is often used in conjunction with a pin wrench / allen wrench or both. |
read more:
21mm Strut Set Up 75.00  | 21mm Special Tube Socket Plus Pin Wrench VW524
Used for securing the Strut tower retaining nut of most European models
(crucial when adjusting tension of front shocks). The 2/3 open side walls of
this socket allows for easy access of an adjusting wrench.
(normally 7mm Allen Hex Wrench)
Also for R&R of Oxygen Sensor.
VW524 Pin Wrench Socket with 1/2" drive. This tool is used for R&R of
grooved ring retaining nut on strut tower of front shock absorber.
Also used for adjusting power steering gear on VW Jetta, Golf, GTI. |
read more:
3 Piece Strut Set 34.99  | On Sale! 22mm Tube Socket Plus Pin Wrench number VW524, Plus 7mm Allen Wrench
Tools used for securing the Strut tower retaining nut of most European models
(crucial when adjusting tension of front shocks). The 2/3 open side walls of
this socket allows for easy access of an adjusting wrench.
(normally 7mm Allen Hex Wrench)
Also for R&R of Oxygen Sensor.
VW524 Pin Wrench Socket with 1/2" drive. This tool is used for R&R of
grooved ring retaining nut on strut tower of front shock absorber.
Also used for adjusting power steering gear on VW Jetta, Golf, GTI.
3 total pieces in this set: 2 Sockets and 7mm Allen Wrench.
The Allen wrench is 7.5 inches long. |
read more:
21mm Strut Set (3) 79.00  | 21mm Tube Socket Plus Pin Wrench number VW524, Plus 7mm Allen Wrench
Tools used for securing the Strut tower retaining nut of most European models
(crucial when adjusting tension of front shocks). The 2/3 open side walls of
this socket allows for easy access of an adjusting wrench.
(normally 7mm Allen Hex Wrench)
Also for R&R of Oxygen Sensor.
VW524 Pin Wrench Socket with 1/2" drive. This tool is used for R&R of
grooved ring retaining nut on strut tower of front shock absorber.
Also used for adjusting power steering gear on VW Jetta, Golf, GTI.
3 total pieces in this set: 2 Sockets and 7mm Allen Wrench.
The Allen wrench is 7.5 inches long. |
read more:
MacPherson Strut Coil Spring Compressor 349.99MacPherson Strut Coil Spring Compressor.
Includes 3 pairs Jaws.For compressing several types of Mac type frontand rear springs.
read more:
22mm Strut O/2 Sensor Socket 18.99 | | On Sale 22mm Special Tube Socket 1.) Used for securing the Strut tower retaining nut of most European models (crucial when adjusting tension of front shocks). The 2/3 open side walls of this socket allows for easy access of an adjusting wrench. (normally 7mm Allen Hex Wrench) 2.) R&R of Oxygen Sensor.
Also for R&R of some Mercedes Diesel injectors ( OM604, 605 & 606). Details: For removing and installing front strut unit on VW Golf up to 1988, Jetta up to 87, Scirocco, Audi 80 and Golf 3 from 1993 newer, Passat from 88 and newer, Audi 100, 200 Coupe and Quatro. This tool is often used in conjunction with a 7mm hex wrench.Clickhere for a picture of the tools in action: |
read more:
2 Piece Socket Set 32.99  | 22mm Special Tube Socket 4491A Plus Pin Wrench VW524
Used for securing the Strut tower retaining nut of most European models
(crucial when adjusting tension of front shocks). The 2/3 open side walls of
this socket allows for easy access of an adjusting wrench.
(normally 7mm Allen Hex Wrench)
Also for R&R of Oxygen Sensor.
VW524 Pin Wrench Socket with 1/2" drive. This tool is used for R&R of
grooved ring retaining nut on strut tower of front shock absorber.
Also used for adjusting power steering gear on VW Jetta, Golf, GTI. |
read more:
MacPherson Strut Coil Spring Compressor 0.00Compressor and removal tool for 'Mac Pherson' Springs.
Due to its size, it can sometimes be used on the car,
without having to remove the shock absorber.
Maximum power: 12,300 N.
Supplied with two pairs of forks
(80 and 165 mm in diameter
155 and 195 mm in diameter).
Because of considerable spring loads, great care is recommended.
Recommended for use with electric and pneumatic (nonimpulse) drivers.
read more:
SpecialOpen Socket 22mm 25.00  | On Sale *
22mm Special TubeSocket
1.) Used for securing the Strut tower retaining nut of most European models (crucial when adjusting tension of front shocks). The 2/3 open side walls of this socket allows for easy access of an adjusting wrench. (normally 7mm Allen Hex Wrench)
2.) R&R of Oxygen Sensor.
Also for R&R of some Mercedes Diesel injectors ( OM604, 605 & 606).
Details: For removing and installing front strut unit on VW Golf up to 1988, Jetta up to 87, Scirocco, Audi 80 and Golf 3 from 1993 newer, Passat from 88 and newer, Audi 100, 200 Coupe and Quatro.
This tool is often used in conjunction with a 7mm hex wrench.
Clickhere for a picture of the tools in action: |
read more:
Pin Wrench Socket 14.99  | VW524Pin Wrench Socket with 1/2" drive.This tool is used for R&R of grooved ring retaining nuton strut tower of front shock absorber. Applicable: This popular tool is used on a wide variety of VW and Audi MK1 golf and GTi , MK2 Golf & GTi 8V and 16VPolos..Audi Coupe..Audi 80 & Audi 90
Also used for adjusting power steering gear on VW Jetta, Golf, GTI. |
read more:
Special Open Socket 22mm 25.00 | | On Sale *
22mm Special TubeSocket
1.) Used for securing the Strut tower retaining nut of most European models (crucial when adjusting tension of front shocks). The 2/3 open side walls of this socket allows for easy access of an adjusting wrench. (normally 7mm Allen Hex Wrench)
2.) R&R of Oxygen Sensor.
Also for R&R of some Mercedes Diesel injectors ( OM604, 605 & 606).
Details: For removing and installing front strut unit on VW Golf up to 1988, Jetta up to 87, Scirocco, Audi 80 and Golf 3 from 1993 newer, Passat from 88 and newer, Audi 100, 200 Coupe and Quatro.
This tool is often used in conjunction with a 7mm hex wrench.
Clickhere for a picture of the tools in action: |
read more:
MacPherson Strut Coil Spring Compressor 289.50  | MacPherson Strut Coil Spring Compressor.
Includes 3 pair Jaws. For compressing several types of MacPherson type front and rear springs.
For European and Domestic vehicles.
Set includes 3 sets of shoes (jaws) Sizes 125 215mm 88 160mm 65 125mm and carrying case. |
read more:
Pneumatic Strut Compressor 00Item 1550/1
.Pneumatic power used to save time and trouble.
Three different interchangeable Forks supplied to accomodate a variety of Spring diameters.
Hands Free Control Foot Pedal Activation.
read more:
T.D.C. Tool 0.00Top Dead Center Tool
Number 2588 1 Belt Changing Tool.
Should be used with 2588 2 and 2588 3. Call for more info.
High Quality Tool Made in Germany.
read more:
12 Pack Air Tool Oil 19.9912 Pack Air Tool Oil.
Specially Formulated for use in all piston type and rotary air tools, as well as in line air lubricators. Prevents rust formation while providing positive lubrication for smooth starting and longer tool life. Assures maximum performance by dissolving gum and sludge that cut down tool speed and reduce power output. ( Marvel 12 Pack)
read more:
Press tool 401 0.00High Quality German Made
Volkswagen Press Tool for assembly work.
Original Factory Tool.
read more:
Volkswagen Door Tool 9.99  | T10011Volkswagen Door Tool triple Square 4
This is the correct tool for the job
New Beetle Tool This tool is used for R & R of door handle screws.Applicable: 1998 & newer VW Golf, Jetta, Passat & New Beetle....possibly other VW Audi.
This tool is a high quality item you will like. |
read more:
End Play Kit 00This tool has isdesigned to measure the end play movement
of the VW crankshaft without the use of a dial indicator.
All that is necessary is a feeler gauge set and this tool.
With the tool bolted to the end of the case, the feeler guage
measures the gap created by the end play.
The taking of this end measurement is necessary whenever a VW engine is rebuilt
to prevent the rear main bearing from seizing up.
A must for rebuilding one engine or many,
this tool works on all air cooled VW engines and Porsche 912 & 914 models.
read more:
BMW Radio Tool 15.00  | Very popular BMW Radio Removal Tool.
Pentagon shaped tool with 5 Sides.
The overall length of this tool is 3 5/8 inches.
Applicable: Most BMWs.
Including E38 E39 7 Series etc...
This tool is used to release anti theft radio mounts. |
read more:
7 Way Crimping Tool 8.997 WAY CRIMPING TOOL
Wire cutter, terminal crimper & wire stripper in one handy tool
Black anodized finish with insulated hand grips
Crimp slot on end of tool secures most ignition terminals including "W" type, right angle and "High Tower" terminals
Crimps 7mm to 8.5mm ignition wire
Works with 10 22 gauge solderless terminals
read more:
Klein Tool Bag 94.50Klein Tool Bag
Number 5002 20
20" Tool Bag, No. 8 natural canvas with vinyl 20" (51 cm) 6" (15 cm) 15" (38 cm)
Klein offers a full line of Tool Bags. With the addition of two 20" bags you can now carry more tools and products. The 5003 series has shoulder strap mounts for use with the new shoulder strap. The canvas tool line has tool bags in lengths of 16" (8 interior pockets), 18" (10 interior pockets) and the new 20" (14 interior pockets) with choices in either leather or vinyl bottoms. Now carry all of your tools the most convenient way for you!
read more:
Socket & Allen Wrench 34.992 Piece set 22mm Special Tube Socket 4491A plus 7mm Allen Wrench Used for securing the Strut tower retaining nut of most European models (crucial when adjusting tension of front shocks). The 2/3 open side walls of this socket allows for easy access of an adjusting wrench This socket can also be used for R&R of Oxygen Sensor. Plus You get an Angled 7mm Allen Wrench with handle.
read more:
Klein Tool Bag 89.99Klein Tool Bag
Number 5003 16
16" Tool Bag, No. 8 natural canvas with leather 16" (41 cm) 6" (15 cm) 14" (36 cm)
Klein offers a full line of Tool Bags. With the addition of two 20" bags you can now carry more tools and products. The 5003 series has shoulder strap mounts for use with the new shoulder strap. The canvas tool line has tool bags in lengths of 16" (8 interior pockets), 18" (10 interior pockets) and the new 20" (14 interior pockets) with choices in either leather or vinyl bottoms. Now carry all of your tools the most convenient way for you!
read more:
Spark Plug Boot Tool 32.99Spark Plug Boot Tool
Due to restricted space the T10029 will install the spark plug boot properly.
VW and Audi spark plug boots designed to seal and increase contact between the spark plug and spark plug wire.
With the increased seal and location of the boot,
this tool has been made to access and remove the spark plug boot.
Tool is approximately 10 inches (250mm) long.
Used to pull off the spark plug socket...SOME APPLICATIONS INCLUDE: 2.8 2.9L VR6 engines
VW Golf, Corrado and Passat.Also Audi 80, 100, A4, A6 with 2.6 and 2.8L V6 engines.
This is the correct tool for the job.You will most likely find OLD number 3277 or 3277A in your manuals but
T10029 is the CORRECT current Volkswagen Audi Tool number. 3277 is and old number and Volkswagen calls this a SPARK PLUG CONNECTOR TOOL.
read more:
7 in 1 Tool 8.507 in 1 TOOL
Includes Wire looper, steel wire cutter,
copper wire cutter, wire stripper,
crimping tool, hose clamp plier and inch/metric scale!
read more:
Valve Spring Tool & Bridge 142.50  | Valve Tools (2)
Set including:Valve Spring Compressor Bar
Same as Volkswagen Tool Number VW 541/1
Used for R&R of valve spring or rocker armWith this tool the job can be done with the cylinder head on or off the car.Used in conjunction with tool BridgeApplicable: 924 / 944 VW AUDI 4 5 Cyl. VA6022Support Bridge Same as VW Tool 2036 Used for R&R of valve spring or rocker armUsed in conjunction with tool VW541/1Applicable: Model 924. VW / AUDI 4 5 Cyl. |
read more:
Valve Spring Tool and Bridge 142.50 | | Valve Spring Tools Set including:VA6010Valve Spring Compressor BarSame as Volkswagen Tool Number VW 541/1Used for R&R of valve spring or rocker armWith this tool the job can be done with the cylinder head on or off the car.Used in conjunction with tool BridgeApplicable: 924 / 944 VW AUDI 4 5 Cyl. VA6022Support Bridge Same as VW Tool 2036 Used for R&R of valve spring or rocker armUsed in conjunction with tool VW541/1Applicable: Model 924. VW / AUDI 4 5 Cyl. |
read more:
12 Pack 32 oz Air Tool Oil 64.9932 oz 12 Pack MVL085
Specially Formulated for use in all piston type and rotary air tools, as well as in line air lubricators. Prevents rust formation while providing positive lubrication for smooth starting and longer tool life. Assures maximum performance by dissolving gum and sludge that cut down tool speed and reduce power output. ( Marvel 12 Pack)
read more:
DAMPER WRENCH 59.95  | DAMPER WRENCH USED TO REMOVE THREADED CAP ON FRONT STRUT ASSY. AND SHOCK ABSORBER |
read more:
DAMPER WRENCH 54.00 | | DAMPER WRENCH USED TO REMOVE THREADED CAP ON FRONT STRUT ASSY. AND SHOCK ABSORBER |
read more:
BMW Center Cap Tool 8.99  | BMW Center Cap Tool.Made in Germany
Tool used to remove and install center caps on several BMW.
Drive size is 17mm
Tool is 3 7/16 inch wide.
BMW NUMBER 36 13 1 180 626 |
read more:
Retainer Wrench 00  | 2594 Retainer Wrench, chrome plated,for rear strut units and front shock absorbers.Size 5,1x8,1 6,1x8,1 |
read more:
Stubby 3/8 X 1/2 Ratchet 23.99Short Pattern Double Drive 3/8 X 1/2
Flexible Head "Stubby" Ratchet
Comfortable rubber cushion grip handle Features 72 gear teeth for speed & durability Chrome vanadium steel construction.
Saves space in the tool pouch or tool box,
saves time looking for a tool
and saves money!
read more:
3 pc. Fold Up Tool Set 45.99  | 3 pc. Fold Up Tool Set
3 fold up tools all made of high alloy CVM steel, hardened, with a molded ergonomic handle. 7 tool PocketStar: Torx sizes: T7, T8, T9, T10, T15, T20, T25. 7 tool MagicRing Metric PocketStar: 2, 2.5, 3, 4, 5, 6 and 8mm. 9 tool MagicRing Inch PocketStar: sizes 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4 in
Satisfaction Guaranteed Made In Germany! |
read more:
VW803 19.99Sorry No Picture
FACTORY TOOL
In Stock Now!
Call if you need more info on this tool.
read more:
VW273A 125.00Sorry No Picture
FACTORY TOOL MADE IN GERMANY
In Stock Now!
Call if you need more info on this tool.
read more:
VW276 49.99Sorry No Picture
FACTORY TOOL MADE IN GERMANY
In Stock Now!
Call if you need more info on this tool.
read more:
Power Lifter Pickup Tool 18.50Pick up Tool 19 inch long with lift cap 1.5lbs.
read more:
VW243 39.99Sorry No Picture
FACTORY TOOL MADE IN GERMANY
In Stock Now!
Call if you need more info on this tool.
read more:
VW244B 125.00Sorry No Picture
FACTORY TOOL MADE IN GERMANY
In Stock Now!
Call if you need more info on this tool.
read more:
VW801 49.99Sorry No Picture
FACTORY TOOL MADE IN GERMANY
In Stock Now!
Call if you need more info on this tool.
read more:
You Searched for strut tool
Click strut tool to go to ZDMAK
SEARCH RSS NEWS USING THE WORDS BELOW
strut tool |
Triple Square Socket |
transmission socket |
drain plug socket |
Brake Caliper Rewind |
Oil Service Tool |
Special Socket |
audi part tool |
vw part tool |
bmw part tool |
mercedes part tool |
porche tools |
volvo part tool |
toyota part tool |
Piston Reset Tool |
Brake Piston Tool |
porsche engine tools |
brake caliper tools |
oil filter socket |
volvo special tools |
oil filter wrench |
mercedes rss |
special tools rss |
porsche rss |
volvo rss |
mercedes tools |
porsche special tool |
vw special tool |
mercedes special tool |
audi special tool |
volkswagen special tool |
volvo tool |
bmw service reset |
bmw radio tool |
bmw cam tool |
hazet tools |
benz repair tool |
benz tool |
mercedes coil spring compressor |
bmw tool kits |
audi radio removal |
volvo cam tool |
vw exhaust tool |
bmw bushing tool |
volkswagen tools |
vw special tools |
mercedes radio removal tool |
toyota special tools |
special tools vw |
ball joint tool |
tie rod tool |
valve spring tool |
tdi tool |
brake tool |
vw radio tool |
hex sockets |
diesel timing tool |
volvo cam tool |
volvo camshaft tools |
volvo crankshaft tools |
mercedes timing tool |
xzn socket tool |
toyota special tool |
toyota repair tool |
tdi timing |
diesel tools |
vw 3391 |
vw 3243 |
audi 3391 |
audi 3243 |
volkswagen 3391 |
volkswagen 3243 |
spark plug tool |
head bolt tools |
head bolt tool |
headbolt tool |
radio removal tools |
waterpump holder |
thin wrench |
saab tools |
ferrari tool |
clutch tools |
belt tensioner tool |
transmission tool |
interior tool |
vanos tools |
piston ring compressor |
porsche repair tool |
fan clutch tool |
valve wrench |
hex sockets |
22mm tool |
32mm wrench |
17mm socket |
crowsfoot tool |
Belt Tension Guage |
Bit Set |
tool kit |
MacPherson Coil Spring Compressor |
Strut Coil Spring Compressor |
strut tool |
MMK Directory Web Design links web design directory webmaster programmer programming hosting web marketing
www.zdmak.com(c) Copyright 2005 ZDMAK.
