piston ring compressor SARASOTA piston ring compressor porsche repair tool -- mmk4mkt

Piston Ring Expander 0.00
Piston ring expanders, nickel plated, plastic coated handlesPressure on the handles opens the ring which is retained in the jaws by the side hooks. Once the pressure is released the ring enters into the piston groove.A transverse spring closes the tool when the piston ring is not inserted.
read more:

Piston Ring Compressor 13.99
WRINKLE BAND PISTON RING COMPRESSORLow friction wrinkle band fits 3" to 5" pistons Adjust only once for all pistons Easy to use
read more:

Trans Clutch Spring Compressor 59.50

Transmission Clutch Spring Compressor. For removing and installing the trans rear clutch piston snap ring adjustable for many domestic cars and light trucks. Applies pressure to the retaining washer in the clutch drum to compress clutch piston return springs in order to remove or install snap ring during repairs or overhaul.

Piston Ring Groove Cleaner 16.99

Piston Ring Groove Cleaner
Easily clean carbon and deposits from ring grooves. Comes with two wheels with five cutters for a total of 10 groove cleaning sizes.

Hazet Quality Tools 177.50

Piston Ring Compressor chrome plated,bent lever (width 32 mm), releasable strap

Hazet Piston Ring Pliers 59.95

Piston Ring Pliers Made in Germany by Hazet! Tool used for 50 100 mm piston rings. The company HAZET was established in 1868 by Hermann Zerver. Today, the Plant 1 at Remscheid is one of the most advanced in Europe. HAZET WERK, the German tool manufacturer from Remscheid demands high standards offering a large range of hand tools and of special tools of highest quality which are especially suitable for the automotive engineering. What matters is the tool quality HAZET Quality is a guarantee for good work results.

Brake Piston Tool 13.99
DISC BRAKE PISTON TOOLFor use on most popular import, Chrysler, Ford and GM vehicles with 4 wheel disc brakes Removes and installs disc brake pistons Re aligns piston slots (where applicable) to back of brake pad Rotates piston back into caliper For use with 3/8" dr. ratchet extension.
read more:

PISTON PIN TOOL 0.00

FACTORY PISTON PIN TOOL USED TO REMOVE AND INSTALL PISTON PIN IN WATERBOXER ENGINES (1.9L & 2.1L)

Ford Mustang Compressor 450.00
Mustang coil spring compressor, designed specically for R&R of front coil springs.
Conventional coil springs compressors have a tough time assessing the coil springs due to the confined space of the chassis,or, too flimsy and unsafe to use.
Simply remove the shock absorber and introduce the compressor shaft into the coil spring either through the A arm or chasis. Incorporates a 3 way safety lock mechanism.
APPLICABLE: All Ford Mustang models 1964 1/2 and newer.
read more:

Valve Spring Compressor * Standard 0.00
Item1450DescriptionValve spring compressor with straight jaws, nickel platedSpecificationsThe pantograph levers ensure consistent coaxial contact with the valve.
read more:

Mercedes Coil Spring Compressor 00
Telescopic compressor for shock absorber springs
Suitable for removing and positioning helicoidal springs
within multi link, independent arm suspension systems.
Supplied with two pairs of interchangeable caps
provided with a three hook safety system.
read more:

Expanding Compressor Kit 35.99

Used to compress and secure the hydraulically activated belt tensioner.This tool presses against a neighboring water pump pulleyand expands as you rotate the 17mm nut.When fully compressed, place locking pin into hydraulic piston push rod.

Valve Spring Compressor 00
Valve spring compressor
Allows operations on valves, with or without heads.
Because many adjustments are possible, it can be fixed to multivalve heads,
up to 12 cylinders (line or V shaped arrangements).
read more:

Mercedes Valve Spring Compressor 149.50

M0068 Valve Spring Compressor Kit M0068For 6 and 8 cylinder engines.Same as Benz Number 123 589 0361 00Spring Compressor Kit used for R&R of valve spring or rocker arm.Job can be done with the cylinder headon or off the car.Applicable: M 114, 115, 116, 117, 123, 130, 180

Rolls Royce Spring Compressor 479.99
Spring Compressor used compress front axle springs in the car on Rolls Royce vehicles.
read more:

MacPherson Strut Coil Spring Compressor 349.99

MacPherson Strut Coil Spring Compressor.
Includes 3 pairs Jaws.For compressing several types of Mac type frontand rear springs.

read more:

MacPherson Strut Coil Spring Compressor 0.00
Compressor and removal tool for 'Mac Pherson' Springs.
Due to its size, it can sometimes be used on the car,
without having to remove the shock absorber.
Maximum power: 12,300 N.
Supplied with two pairs of forks
(80 and 165 mm in diameter
155 and 195 mm in diameter).
Because of considerable spring loads, great care is recommended.
Recommended for use with electric and pneumatic (nonimpulse) drivers.
read more:

Brake Piston Tool 14.99

Disc Brake Piston Cube Tool has 5 different drive pin configurations designed to rotate the parking brake activated piston back into the caliper cylinder when replacing worn pads on vehicles equipped with 4 wheel disc brakes. Tool will service many domestic and import cars. This tool will work in place of special tool 3272. Some Audi VW calipers (mid 80s) use a hex tool check yours to be certain a pain in the neck if you have never done them before. Grind or file off two diagonally opposite corner pins to allow the cube to fit the vw rear brake piston. Use with a 3/8" ratchet. It can be easier to fasten the rear caliper back onto the carrier without the rotor in place while using this tool. That way you get a little extra leverage. Use as follows: engage the two prongs and turn the piston 180 clockwise. Remove the tool. Use a generic calper tool or a c clamp and push the piston in about 2mm. Keep alternating back and forth between the cube tool and the c clamp until the piston in almost all the way in. If you are strong enough, you may not even need the c clamp just push with the cube tool as you turn. Instead of the cube, you can even use needle nose pliers, but then you defintiely need the c clamp. The rear brakes can be rather difficult, so make sure you have plenty of time. Also for use on most popular imports and Chrysler, Ford and GM vehicles with 4 wheel disc brakes.

Hog Ring Plier Set 2 39.99

Hog Ring Plier Set 2 Pieces Specially designed for installation of Hog Ring fasterners. Grips and holds hog ring during closure. Spring loaded to hold ring in jaws during use. Cushioned grip handle. Includes both 45 and Straight hog ring pliers.

Valve Spring Compressor 0.00
Valve spring compressor
. Allows spring compression by releasing the valve from the valve collets without removing the head.
. The tool is fixed to either the camshaft or the head walls by two hooks supplied with it
read more:

10.75 Inch TDC Indicator 34.95

The TDC Indicator enables a technician to accurately setany piston to Top Dead Center. Just remove the spark plug, screw in the gauge and rotate the engine, observing the gradation markson the sliding shaft. Note the top of the piston stroke!. Accurately displays piston movement. 1/8" gradation marks. Installs as easily as a spark plug. Made of 1144 steel alloy with a stainless steel spring
10 3/4 (14mm thread): 7886
(ALSO AVAILABLE IN 6 IN. LENGTH)

6 Inch TDC Indicator 24.95

The TDC Indicator enables a technician to accurately setany piston to Top Dead Center. Just remove the spark plug, screw in the gauge and rotate the engine, observing the gradation markson the sliding shaft. Note the top of the piston stroke!. Accurately displays piston movement. 1/8" gradation marks. Installs as easily as a spark plug. Made of 1144 steel alloy with a stainless steel spring
6" Standard (14mm thread): 7880
(ALSO AVAILABLE IN 10.75 LENGTH)

Multi Function Key Ring 29.99
Multi Function Tool Key Ring
Miniature steel tool set (knife, bottle cap opener, both types of screwdrivers) on ring, BMW Roundel on spring loaded closure.
read more:

Hook Wrenches 00
Hook wrenches with square noses for ring nuts, chrome plated
SpecificationsFor ring nuts.
(UNI/ISO 2982, 2983) UNI 5752
The multi radius inner profile ensures a perfect fit on both standard and bearing ring nuts.
read more:

Spring Compressor (Exhaust) 59.99

Valve Spring Compressor (Exhaust)Designed for On The Car R&R of Exhaust valve springswithout having to remove the motor or cylinder heads.Applicable: Porsche model 911 '65 '89.

1000V Ring Wrenches 00
Item89MQDescription1000V insulated single ring wrenchesSpecifications(EN 60900)
read more:

Spring Compressor (Intake) 59.99

Valve Spring Compressor (Intake) Porsche Number P7iDesigned for On The Car R&R of Intake valve springsw/o having to remove the motor or cylinder heads. Applicable: Porsche model 911 1965 '89

Valve Spring Compressor 59.99

Valve Spring Compressor
Featuring two way adjustment with quick and easy compress and release.
. Jaw opening: 2 3&8260;4&8243; to 7 3&8260;4&8243;. 9 3&8260;4&8243; Depth

Saab Brake Piston Turning Tool 25.50

Turning Tool needed for rotating the piston backinto the brake caliper when replacing brake pads.Applicable: Saab models '87 and older. Excluding 9000 series

Double ended Flat Ring Wrenches 00
Double ended flat ring wrenches, chrome plated (UNI 6739 DIN 837 ISO 10103). The heads are thinner than combination and offset ring wrenches.
read more:

Special Sockets / Locking Ring Nuts 00
Item960GHDescriptionSockets for self locking ring nuts, chrome platedSpecificationsDesigned for industrial and commercial vehicles.Suitable for removing ring nuts from compressors, main shafts, differential gears, hydraulic power steering, wheel hub bearings, drive shafts and direct drive shafts.
read more:

Mini Snap Ring Plier Set 15.50

OTC Mini Snap Ring Plier Set
Small size pliers for work in tight areas. Service S ring and R ring clips, internal or external, straight or angled. Ruggedly built of heat treated chrome molybdenum steel. Set includes two internal snap ring pliers (one straight, one 45) and two external snap right pliers (one straight, one 45). All pliers have .038" (1.0mm) diameter tips.

Spring Compressor Kit 269.00

Special Low Price
Mercedes Coil Spring Compressor Kit
For front and rear coil springs.
Applicable: Mercedes chassis W107, W116, W123, W124, W126, W129, W140, W201, W202.
Comes with a convenient carrying case.
Ref: 924 589 0231 00
Call if you have any questions about this tool or any other tool.

MacPherson Coil Spring Compressor 289.50

MacPherson Strut Coil Spring Compressor.
Includes 3 pair Jaws. For compressing several types of MacPherson type front and rear springs.
For European and Domestic vehicles.
Set includes 3 sets of shoes (jaws) Sizes 125 215mm 88 160mm 65 125mm and carrying case.

Ring Nut Socket 00
Item969DescriptionRing nut socket, chrome platedSpecificationsDesigned for suspension arm bearing ring nuts.Provided with an inner threaded jam nut to help pull the joint out.
read more:

MacPherson Strut Coil Spring Compressor 289.50

TDC and Crank Stopper 69.99

TDC Tools and Crank Stopper The TDC Indicator enables atechnician to accurately setthe piston to Top Dead Center.Just remove the spark plug, screwin the gauge and rotate the engine,observing the gradation markson the sliding shaft. Note the topof the piston stroke! The Crank Stopper Helps to lock an engine in place for timing chain/belt and pulley removal. Call or email for complete set or singles.

Deck Height Kit 29.95

This Tool measures the distance from the top of the cylinder to the top of the piston.
Proper deck height is essential in preventing the piston from hitting the cylinder head,
blue printing an engine and in calculating the compression ratio.
This easy to use tool measures deck height
with the use of its own calibrated, threaded screw or feeler guages,
dial indicators & calipers. It has been designed to allow the cylinder to be torqued
against the case for accurate measurement.
For use on type I, II, & III engines.

HNBR O Ring Assortment 12.50
270 pc HNBR O RING ASSORTMENT
. Contains 18 popular sizes:
7/32 x 1/16' 20 pcs 1/4 x 1/16' 20 pcs 6.8 x 1.9 20 pcs 5/16 x 1/16' 20 pcs 7.8 x 1.9 20 pcs 8 x 2 20 pcs 8.8 x 1.9 20 pcs 7/16 x 1/16' 15 pcs 7/16 x 3/32' 15 pcs 11 x 2 15 pcs 12 x 2 15 pcs 13.9 x 1.8 10 pcs 9/16 x 3/32' 10 pcs 14 x 2 10 pcs 15 x 2 10 pcs 17 x 2 10 pcs 11/16 x 1/16' 10 pcs 11/16 x 1/8' 10 pcs. Convenient re sealable plastic case.
read more:

Special Adaptor Ring * 154.50

New Porsche Adaptor Ring
For the budget minded Porsche & VW air cooled engine rebuilder...Check it out.....
This Ring (same as the one equipped on the factory style Engine Holding Fixture P201)
is void of any holding or securing tubes.
This adaptor ring is specifically designed to mate the engine case straight to any universal engine stand, using four 3/8" Bolts,
thus allowing for a full 360 degree rotation of the engine.
This ring is designed to bolt up to every Porsche and VW fully dressed air cooled engine ever produced.
It is machined with all the necessary reliefs and/or notches to allow for clearance of all engine parts, including the flywheel and its respective lock tool (VW Flywheel lock 215). Call Zdmak 877 938 6657.

Flat Ring Wrenches Double End 00

Double ended flat ring wrenches, chrome plated (UNI 6739 DIN 837 ISO 10103). The heads are thinner than combination and offset ring wrenches.

Hook Wrenches Round Nose 00
Item99STDescriptionHook wrenches with round noses for ring nuts, chrome platedSpecificationsThe hook profile allows each wrench to cover a larger ring nut range than the fixed models.Replaceable screwed in pin.
read more:

Snap Ring Plier Set 11.99
5 Piece
Snap Ring Plier Set
Plier handle and (4) tip assemblies: (2) straight, (1) 45 and (1) 90 (1) spring retainer assembly Vinyl grip handles For Internal or External snap rings
read more:

Saab Rigid Valve Spring Compressor 58.50

This Unique "On the Car" Rigid Valve Spring Compressor was designed to do away with conventional Lever based or C Clamp type mechanisms. The side by side threaded compressors inherent design allows the technician to have hands free to work with, and safely and easily maintain the Valve Spring to a fully compressed position, and to repair Valve Stem Seals without removing the Heads. This unit will cut repair time considerably.Will work on Saab 900, 9000, 9 3, 9 5 Double Overhead Cam Engines From early to later models.

Hook Wrenches Square Nose 00
Item99SQDescriptionHook wrenches with square noses for ring nuts, chrome platedSpecificationsThe hook profile allows each wrench to cover a larger ring nut range than the fixed models.Also suitable for fitting PVC nipples.
read more:

Ball Bearing Key Ring 29.99
Ball Bearing Key Ring
Stainless steel ball bearing in struck brass with BMW Roundel on spring loaded hook closure.
read more:

419 Pc Metric O Ring 19.50
419 Pc Metric O Ring KitContains 32 different sizes of O Rings1.5 (ID 3) section to 3.5 (ID 50) section.
read more:

Heavy Duty offset Ring Wrenches 00
Heavy duty offset ring wrenches, chrome plated . To be used with extension tubes item 92.
read more:

Pin Wrench Set 00
Item 100
DescriptionRound pin wrench for ring nuts with front holes, chrome plated.
Specifications:
Burnished finish pins. This set will come to you Supplied with 2 different size sets of pins for 4 ring nut sizes.
The sizes are 4.9mm, 5.9mm, 6.9mm, and 7.9.
Each pair of pins can be flipped to utilize selected size needed. Picture above does not show extra pins that will be included with purchase.
read more:

German Deep Offset Wrench Set 99.50
Deep Offset Box Wrench Set
High Quality 8 Piece Set Made in Germany!
Sizes included:
6 x 7mm
8 x 9mm
10 x 11mm
12 x 13mm
14 x 15mm
16 x 17mm
18 x 19mm
20 x 22mm
12 point ring spanners.
Satin chrome, made of high performance forged steel.
Polished head and ring.
Comes in a plastic roll up pouch.
read more:

You Searched for

piston ring compressor

Trade Links With ZDMAK