valve spring tool tdi tool brake tool vw radio tool -- mmk4mkt

Valve Spring Tool & Bridge 142.50

Valve Tools (2)
Set including:Valve Spring Compressor Bar
Same as Volkswagen Tool Number VW 541/1
Used for R&R of valve spring or rocker armWith this tool the job can be done with the cylinder head on or off the car.Used in conjunction with tool BridgeApplicable: 924 / 944 VW AUDI 4 5 Cyl. VA6022Support Bridge Same as VW Tool 2036 Used for R&R of valve spring or rocker armUsed in conjunction with tool VW541/1Applicable: Model 924. VW / AUDI 4 5 Cyl.

Valve Spring Compressor 0.00
Valve spring compressor
. Allows spring compression by releasing the valve from the valve collets without removing the head.
. The tool is fixed to either the camshaft or the head walls by two hooks supplied with it
read more:

Valve Spring Tool 68.00

Valve Spring Compressor Bar VA6010 Used for R&R of valve spring or rocker arm VW AUDI 4 / 5 Cylinder.With this tool the job can be done with the cylinder head on or off the car.Used in conjunction with tool VA6022 below Applicable: 924 / 944Reference VW Tool Number VW541/1

Universal Valve Spring Compressor 59.99
This set is used to remove and install the valve spring
with the cylinder head still on the engine and in the car,
or with the cylinder head removed.
The multi point adjustable base of this tool bolts securely to the headwhile the adjustable lever mechanism pivots from the bar thus compressing the spring.Quick removal and installation of the spring retaining keepers is then easily accomplishedthrough the large openings on both sides of the compression tube.This set comes complete with an easy grip handle and a storage tray.
read more:

Valve Tool 00
Valve Spring Tool with interchangeable components. For use on many vehicles without removing cylinder head.
read more:

Spring Loaded Gauge 46.50

P228 Spring Loaded Gauge Spring Loaded Gauge Displays valve spring height using pre calibrated indicatorsstamped onto the outside surface of this tool. Crucial for accurate valve spring adjustment.Applicable: Porsche 911.Same as Porsche P10C

Valve Spring R&R Kit 00

This set is used to remove and install the valve spring
with the cylinder head still on the engine and in the car,
or with the cylinder head removed.
The multi point adjustable base of this tool bolts securely to the headwhile the adjustable lever mechanism pivots from the bar thus compressing the spring.Quick removal and installation of the spring retaining keepers is then easily accomplishedthrough the large openings on both sides of the compression tube.This set comes complete with an easy grip handle and a storage tray.

Universal Valve Spring Compressor 68.50

Valve Spring Compressor * Standard 0.00
Item1450DescriptionValve spring compressor with straight jaws, nickel platedSpecificationsThe pantograph levers ensure consistent coaxial contact with the valve.
read more:

Valve Spring Compressor 00
Valve spring compressor
Allows operations on valves, with or without heads.
Because many adjustments are possible, it can be fixed to multivalve heads,
up to 12 cylinders (line or V shaped arrangements).
read more:

Mercedes Valve Spring Compressor 149.50

M0068 Valve Spring Compressor Kit M0068For 6 and 8 cylinder engines.Same as Benz Number 123 589 0361 00Spring Compressor Kit used for R&R of valve spring or rocker arm.Job can be done with the cylinder headon or off the car.Applicable: M 114, 115, 116, 117, 123, 130, 180

4 in 1 Tire Valve Tool 2.50
4 in 1 Tire Valve Tool
Removes and installs Valve Cores
Re cuts internal and external valve threads.
Fits majority of standard valve stems on cars trucks and bicycles, etc.
read more:

Saab Rigid Valve Spring Compressor 58.50

This Unique "On the Car" Rigid Valve Spring Compressor was designed to do away with conventional Lever based or C Clamp type mechanisms. The side by side threaded compressors inherent design allows the technician to have hands free to work with, and safely and easily maintain the Valve Spring to a fully compressed position, and to repair Valve Stem Seals without removing the Heads. This unit will cut repair time considerably.Will work on Saab 900, 9000, 9 3, 9 5 Double Overhead Cam Engines From early to later models.

Set 3 Valve Tools 105.50
VALVE ADJUSTING TOOL SET OF 3
Valve adjusting on the Rabbit, Scirocco, and Jetta 1 requires the use of a special tool to hold the cam followers in the down position in order to remove the shims for replacement. The valve adjusting pliers are then used to remove the shim. Note: The 1.6 and 1.7 liter engines use a different tool than the 1.8 liter engine becuase of valve spacing. The Shim Set works on all solid lifter cylinder heads.
read more:

Brake Return Spring Tool 8.50

Brake return Spring Tool
Used to hook the return spring on vehicles without anchor pins.Excellent for the professional or shadetree mechanic!

Valve Adjuster 25.00

BMW3013 VALVE ADJUSTING HOOK SPRING LOADED*Valve Adjuster used for turning rocker eccentric in any position.Applications include: BMW engine M10, M20, M30.The BMW ref. number is 99 88 6 113 070.This is Much better than the Factory Tool.

Brake Spring Plier 11.99

Brake Spring Tool for removing and installing Shoe return springs on most drum brakes. The socket end removes the spring from the anchor stud, and the notched end installs the spring on the anchor.

Spring Compressor (Exhaust) 59.99

Valve Spring Compressor (Exhaust)Designed for On The Car R&R of Exhaust valve springswithout having to remove the motor or cylinder heads.Applicable: Porsche model 911 '65 '89.

Reversible Air Driver 00
Item1935I/4DescriptionReversible air screwdriverSpecificationsThe high number of rpms is synonymous with high screwing capacities.Provided with an external adjustable clutch with air shut off.Suitable for assembly jobs on light materials like plastic and sheet metal.The chuck is rotated by the pressure the user makes. Once the torque needed is reached, the clutch shuts off the air exiting from the tool, thus locking the tool. The torque can be adjusted by means of the spring (see photo), or by replacing the spring with the ones supplied with the tool: white, 2.3 mm (light); yellow, 2.6 mm, mounted on the tool (medium); orange, 3.0 mm (strong). Quick release chuck and balancing hook.Motor provided with muffler and rear exhaust.
read more:

Technical Measuring Tools 14.99
4 Piece Tool Set
Technical Measuring Tools
Includes ruler, spring divider, spring outside caliper, and spring inside caliper.
Carbon steel with hardened fulcrum, spring, and points.
All instruments are precision ground and polished with fine adjustments.
Length: Ruler 6 inch / divider 6 inch / outside caliper inch / inside caliper 6 inch
Calibration: Ruler graduated in 16ths and 64ths, millimeters, and 500 micron increments (reverse includes conversion tables).
read more:

Valve Tool for Volkswagen 61.95

Valve Tool for Volkswagen Valve Tool for VolkswagenThis unique tool has been designed to allow removal and installation of valve springs while the engine is still in the carType I, II III engines 40 HP and laterThis set will also remove springs on disassembled engines.

Spring Compressor (Intake) 59.99

Valve Spring Compressor (Intake) Porsche Number P7iDesigned for On The Car R&R of Intake valve springsw/o having to remove the motor or cylinder heads. Applicable: Porsche model 911 1965 '89

Valve Spring Compressor 59.99

Valve Spring Compressor
Featuring two way adjustment with quick and easy compress and release.
. Jaw opening: 2 3&8260;4&8243; to 7 3&8260;4&8243;. 9 3&8260;4&8243; Depth

Rivet Driver Hubcap Tool 25.50
Rivet Driver P217 Driver needed to properly secure spring clipsonto the rim which holds the hubcap on the wheel.Applicable: Correct wheel setup for all Porsche 356 modelswith drum brakes and VW 1967 and older. The end w/o a "divot" in it gets secured into a vise which should be secured onto a workbench.You hold the steel wheel over the vertical standing Rivet Tool and place a rivet into the divot end of the tool.
Then, BLAMO with a hammer, thus securing Hub Cap steel spring onto the steel wheel via the rivet.When the rivet is secured into the steel wheel, you have to flare out the back end of it so the rivet doesnt work its way out.
read more:

Support Bridge 75.00

VA6022 Support Bridge Used for R&R of valve spring or rocker arm.Used in conjunction with tool VA6010 (above). Applicable: Model 924. VW / AUDI 4 5 Cyl.Reference VW Tool 2036

MacPherson Strut Coil Spring Compressor 0.00
Compressor and removal tool for 'Mac Pherson' Springs.
Due to its size, it can sometimes be used on the car,
without having to remove the shock absorber.
Maximum power: 12,300 N.
Supplied with two pairs of forks
(80 and 165 mm in diameter
155 and 195 mm in diameter).
Because of considerable spring loads, great care is recommended.
Recommended for use with electric and pneumatic (nonimpulse) drivers.
read more:

13mm Adjustment Tool 45.95
13mm Jam Nut Valve Adjustment Tool
Designed for a wide variety of cars with 13mm jam nut valve adjustment screws.
This two in one tool has a window in its socket so the technician can see the position of the screwdriver blade holding the
adjustment screw as the jam nut is tightened.
This visual contact in addition to the feel of holding the screwdriver The unique handle pivots from one side to the other, so the window is always visible.
read more:

10mm Adjustment Tool 45.95
10mm Jam Nut Valve Adjustment Tool
Designed for a wide variety of cars with 10mm jam nut valve adjustment screws.
This two in one tool has a window in its socket so the technician can see the position of the screwdriver blade holding the
adjustment screw as the jam nut is tightened.
This visual contact in addition to the feel of holding the screwdriver The unique handle pivots from one side to the other, so the window is always visible.
read more:

12mm Adjustment Tool 45.95
12mm Jam Nut Valve Adjustment Tool
Designed for a wide variety of cars with 12mm jam nut valve adjustment screws.
This two in one tool has a window in its socket so the technician can see the position of the screwdriver blade holding the
adjustment screw as the jam nut is tightened.
This visual contact in addition to the feel of holding the screwdriver The unique handle pivots from one side to the other, so the window is always visible.
read more:

1/2 Inch Adjustment Tool 46.95
1/2 Inch Jam Nut Valve Adjustment Tool
Designed for a wide variety of cars with 1/2 Inch jam nut valve adjustment screws.
This two in one tool has a window in its socket so the technician can see the position of the screwdriver blade holding the
adjustment screw as the jam nut is tightened.
This visual contact in addition to the feel of holding the screwdriver The unique handle pivots from one side to the other, so the window is always visible.
read more:

Spring Compressor Kit 269.00

Special Low Price
Mercedes Coil Spring Compressor Kit
For front and rear coil springs.
Applicable: Mercedes chassis W107, W116, W123, W124, W126, W129, W140, W201, W202.
Comes with a convenient carrying case.
Ref: 924 589 0231 00
Call if you have any questions about this tool or any other tool.

Two Valve Tools 135.00

Set of Two Valve Tools including Tappet Depressor same as BMW Ref. 113170
Double ended Tappet Depressor used for preloading cam followers when exchanging valve adjusting shims. Applicable: BMW M engines (S14 S38) Excluding European models.
Plus Valve Adjuster Hook (Spring Loaded) used for turning rocker eccentric in any position.Applications include: BMW engine M10, M20, M30.The BMW ref. number is 99 88 6 113 070.

Valve Adjustment Tool 45.99

13mm Jam Nut Valve Adjustment Tool
Designed for a wide variety of cars with 13mm jam nut valve adjustment screws.
This two in one tool has a window in its socket so the technician can see the position of the screwdriver blade holding the
adjustment screw as the jam nut is tightened.
This visual contact in addition to the feel of holding the screwdriver The unique handle pivots from one side to the other, so the window is always visible.

MacPherson Strut Coil Spring Tool 54.50

The Strutter2, MacPherson Strut Coil Spring Tool With acme threads and economically priced. virtually all Quickly and easily work on the MacPherson Struts found on virtually all modern domestic and imported vehicles. Features a one piece cold headed bolt made of chromium molybdenum alloy steel. The nuts are Grade 5. Use with impact wrench or hand tool ON or OFF the car.car. Contains complete instructions and safety kit. Not for use on any unusually large MacPherson Strut springs which have a coil outside diameter of over 6" or a wire diameter larger than 5/8". Do not use on General Motors "A", "C", "J" or "X" Body cars.
Acme threads for easy use and additional strength.
Clamshell packaging with a built in handle can be used to store the tool.

Multi Function Key Ring 29.99
Multi Function Tool Key Ring
Miniature steel tool set (knife, bottle cap opener, both types of screwdrivers) on ring, BMW Roundel on spring loaded closure.
read more:

Big 30 Inch Extension 39.75
Extra Long 30 inch Impact
Universal Extension Bar
3/8 Dr. male end (spring loaded) universal end, 1/2 inch female Drive heavy bar to reduce torque flexing. A GREAT tool for transmission work etc.
Durable, spring loaded impact universal joints featuring the new safety ring to prevent any movement of the pin during the impacting process. Extraordinary value for the money. Most extensions you will find do not have a U joint or do not come in this extra long size with a 3/8 end. Extremely handy for the european auto mechanic.
read more:

Spring Clips 2.50
P241 Spring Clips like vw 171Used for securing cam followers within crank case half during assembly. Applicable: Porsche model 356, 912, 914.Every VW air cooled engine.
read more:

Toyota Valve Adjustment Tool 19.99

This tool has been designed to allow for easy valve adjustment on most Toyota overhead cam engines using spacer shims for valve adjustment. In operation, the tip of the pliers pushes between the spacer shim and the camshaft as the pliers are squeezed close. This action moves the shim and its valve lifter down from the camshaft lobe.In the down position the separate wedge tool is placed between the valve lifter ledge and the camshaft. This wedge tool then maintains a gap between the shim and the camshaft as the pliers are removed. The spacer shim can then be removed through this gap and replaced with one of the correct thickness.
Works especially well with3S FE and 3S GELC Toyota DOHC.
Toyota number 09248 55040
For Camry, Sienna, Avalon, Solara, Supra, 4Runner, MR2, Previa, Paseo, Tacoma, Tercel, T100, Celica.
Packaged as shown with pliers and spacer wedge.Does not work with Land Cruiser 1993 1997 and Lexus LX400 1994 1997

Honda Toyota Nissan Tool 45.95

12mm Jam Nut Valve Adjustment Tool
Designed for a wide variety of cars with 12mm jam nut valve adjustment screws.
This two in one tool has a window in its socket so the technician can see the position of the screwdriver blade holding the
adjustment screw as the jam nut is tightened.
This visual contact in addition to the feel of holding the screwdriver The unique handle pivots from one side to the other, so the window is always visible.

Honda Valve Adjustment 45.95

10mm Jam Nut Valve Adjustment Tool
Designed for a wide variety of cars with 10mm jam nut valve adjustment screws.
This two in one tool has a window in its socket so the technician can see the position of the screwdriver blade holding the
adjustment screw as the jam nut is tightened.
This visual contact in addition to the feel of holding the screwdriver The unique handle pivots from one side to the other, so the window is always visible.

Toyota Bonus Set 37.99

ZDMAK SPECIAL DEAL
Headbolt tool and Valve tools...
First Item: Valve tool designed to allow for easy valve adjustment on most Toyota overhead cam engines using spacer shims for valve adjustment. In operation, the tip of the pliers pushes between the spacer shim and the camshaft as the pliers are squeezed close. This action moves the shim and its valve lifter down from the camshaft lobe. In the down position the separate wedge tool is placed between the valve lifter ledge and the camshaft. This wedge tool then maintains a gap between the shim and the camshaft as the pliers are removed. The spacer shim can then be removed through this gap and replaced with one of the correct thickness. Works especially well with 3S FE and 3S GELC Toyota DOHC.Toyota number 09248 55040For Camry, Sienna, Avalon, Solara, Supra, 4Runner, MR2, Previa, Paseo, Tacoma, Tercel, T100, Celica.Packaged as shown with pliers and spacer wedge. Does not work with Land Cruiser 1993 1997 and Lexus LX400 1994 199

PLUS * Toyota Headbolt Tool
12 Point (Triple Square) Socket.
This item is called XZN (style) and is very hard to find. 1/2 Drive Socket is 100mm long, for easy access to hard to reach headbolts.

Exhaust Clip Expander 85.00

Like Volkswagen Tool 3049A Exhaust Clip Expanderor C Clip Spreader...This tool is used for the proper R&Rof exhaust manifold Spring clip. This is a Quality Tool and the price is right.

Air Hammer 00
Item1940DescriptionAir hammerSpecificationsThis tool can be used for cutting sheet, bolts and bodies, removing welding slags, rivets, plaster and tiles. Supplied with a spring and a bayonet retainer for hexagon bits.
read more:

Relief Valve Tool 30.50
P236 Pressure Relief Valve Extractor Extractor the proper extraction of the from engine case. All Porsche VW Boxer 4
read more:

Audi Info and Timing 0.00

There are three main Cam bars for timing.
3391, 3243 and T40005
(T40005 is for V 8)
Notice the tool number 3242 this is the T.D.C (TOP DEAD CENTER) Pin
This pin goes with 3391 or 3243.
Type your selection in the search or you can find the tools in this Audi section.
Feel free to call me or email. I will try to assist you.
Please note:
In order to make your selection you must determine if your vehicle is 2 valve per cylinder or 5 valve per cylinder or V8. Example = Notice tool number 3391 says it is for 5 valve. The 3243 is for 2 valve per cylinder.

Headbolt Tool for BMW 34.50

Headbolt Tool for BMW Socket is designed to fit in the cylinder head on M42 and M50 engines to remove and install cylinder headbolts. Spring loaded detent ball holds bolt in place. Socket size is E12 for external TORX bolts. Heavy Duty tool 1/2 inch drive.

Timing & Cam Tools 0.00

Please note: There are three main Cam bars for timing.
Choose from 3391
3243
and T40005 (the T40005 is for V 8)
Notice the tool number 3242, this is the T.D.C TOP DEAD CENTER Pin. This pin goes with 3391 or 3243. Type your selection in the search or you can find the tools in this section. You should refer to a manual if one is available to you, or feel free to call me or email. I will try to assist you. Please note:
In order to make your selection you must determine if your vehicle is 2 valve per cylinder or 5 valve per cylinder or V8. Example = Notice tool number 3391 says it is for 5 valve. The 3243 is for 2 valve per cylinder.

Spreader Socket 26.99
Spreader Socket Number 3424This tool is used on all A4 platform VWs including Golf,Jetta, and Gti, 337, 20a.e. GTI model year 1999 to presentTool is used any time the strut needs to be separated from the wheel bearing housingMost common would be changing/replacing struts, coil spring, or the entire strut assemblyYou would also use this tool when servicing the wheel bearingWhy do you need to use it?? you can not easily remove the strut from the wheel bearing housing without itThe wheel bearing housing clamps down very tightly on the strut assembly....even with the bolt removed the housing is still firmly clamped to the strut...this tool allows you to spread the housing where it is clamped on so that the strut can be removed.Basically this tool is a must have any time the strut or wheel bearing housingneeds to be removed from the above models.
read more:

Neway Valve Seat Cutter 0.00
Neway Valve Seat Cutter
Neway has been in business since 1952 manufacturing and distributing tools and equipment for valve seat reconditioning and valve reconditioning.The "trademark" product is the Neway valve seat cutter. Neway seat cutters are almost standard equipment in any machine shop that services four stroke engines whether the work is small engine repair, automotive high performance, routine motorcycle maintenance, or heavy duty engine rebuilding. Neway offers value. It is extremely easy to use and accurate enough to be the tool of choice for high performance engine work, and it does not require a major investment.
For More info call or email.
read more:

Hazet Quality Tools 59.50
Bmw Headbolt Tool.
MADE IN GERMANY by Hazet!
E12 Female Special Lock Ball Torx Socket for cylinder head screws M42 4 cylinder/4 valve and M50 6 cylinder/4 valve. Drive size is 1/2 inch.
read more:

You Searched for

valve spring tool

Trade Links With ZDMAK