Reversible Air Driver 00
Item1935I/4DescriptionReversible air screwdriverSpecificationsThe high number of rpms is synonymous with high screwing capacities.Provided with an external adjustable clutch with air shut off.Suitable for assembly jobs on light materials like plastic and sheet metal.The chuck is rotated by the pressure the user makes. Once the torque needed is reached, the clutch shuts off the air exiting from the tool, thus locking the tool. The torque can be adjusted by means of the spring (see photo), or by replacing the spring with the ones supplied with the tool: white, 2.3 mm (light); yellow, 2.6 mm, mounted on the tool (medium); orange, 3.0 mm (strong). Quick release chuck and balancing hook.Motor provided with muffler and rear exhaust.
read more:

Flywheel Lock 00
Universal Flywheel Lock
Designed for use on all air cooled Volkswagen engines
Type 1, 2, 3, & 4 and on all air cooled Porsche engines
(series 356, 912, 914, & all 911s through 1969).
This tool is a must when changing a flywheel or its seal
and it comes in handy when changing a clutch.
Made from a forging, this quality tool will last a lifetime.
read more:

T.D.C. Tool 0.00
Top Dead Center Tool
Number 2588 1 Belt Changing Tool.
Should be used with 2588 2 and 2588 3. Call for more info.
High Quality Tool Made in Germany.
read more:

12 Pack Air Tool Oil 19.99
12 Pack Air Tool Oil.
Specially Formulated for use in all piston type and rotary air tools, as well as in line air lubricators. Prevents rust formation while providing positive lubrication for smooth starting and longer tool life. Assures maximum performance by dissolving gum and sludge that cut down tool speed and reduce power output. ( Marvel 12 Pack)
read more:

Counter Holder 18.50
Counter Holder 2615
Used for securing water pump hubfrom rotating during R&R of fan clutch nut. Applicable: G.M. Light to Heavy duty engines 96 and newer.
read more:

Phoenix Bleeding & Flushing 0.00
The Phoenix Injector is the only tool in the world capable of performing ALL bleeding and flushing methods: Pressure, Vacuum, Bench, and Reverse Fluid Injection or RFI . RFI is the patented process of injecting fluid at lowest point in the hydraulic system, thereby allowing fluid and air bubbles to naturally rise back to the master cylinder reservoir.
As a brake and clutch bleeding technique, RFI opens up many problem solving doors that were previously unavailable. RFI , with the proper adapters and procedures, will allow a technician to bleed difficult systems in under 20 minutes or bench bleed a master cylinder, perfectly, in three minutes. CALL OR EMAIL
Read all about itClick Here
read more:

Press tool 401 0.00
High Quality German Made
Volkswagen Press Tool for assembly work.
Original Factory Tool.
read more:

End Play Kit 00
This tool has isdesigned to measure the end play movement
of the VW crankshaft without the use of a dial indicator.
All that is necessary is a feeler gauge set and this tool.
With the tool bolted to the end of the case, the feeler guage
measures the gap created by the end play.
The taking of this end measurement is necessary whenever a VW engine is rebuilt
to prevent the rear main bearing from seizing up.
A must for rebuilding one engine or many,
this tool works on all air cooled VW engines and Porsche 912 & 914 models.
read more:

7 Way Crimping Tool 8.99
7 WAY CRIMPING TOOL
Wire cutter, terminal crimper & wire stripper in one handy tool
Black anodized finish with insulated hand grips
Crimp slot on end of tool secures most ignition terminals including "W" type, right angle and "High Tower" terminals
Crimps 7mm to 8.5mm ignition wire
Works with 10 22 gauge solderless terminals
read more:

Klein Tool Bag 94.50
Klein Tool Bag
Number 5002 20
20" Tool Bag, No. 8 natural canvas with vinyl 20" (51 cm) 6" (15 cm) 15" (38 cm)

Klein offers a full line of Tool Bags. With the addition of two 20" bags you can now carry more tools and products. The 5003 series has shoulder strap mounts for use with the new shoulder strap. The canvas tool line has tool bags in lengths of 16" (8 interior pockets), 18" (10 interior pockets) and the new 20" (14 interior pockets) with choices in either leather or vinyl bottoms. Now carry all of your tools the most convenient way for you!
read more:

Klein Tool Bag 89.99
Klein Tool Bag
Number 5003 16
16" Tool Bag, No. 8 natural canvas with leather 16" (41 cm) 6" (15 cm) 14" (36 cm)

Klein offers a full line of Tool Bags. With the addition of two 20" bags you can now carry more tools and products. The 5003 series has shoulder strap mounts for use with the new shoulder strap. The canvas tool line has tool bags in lengths of 16" (8 interior pockets), 18" (10 interior pockets) and the new 20" (14 interior pockets) with choices in either leather or vinyl bottoms. Now carry all of your tools the most convenient way for you!
read more:

Spark Plug Boot Tool 32.99
Spark Plug Boot Tool
Due to restricted space the T10029 will install the spark plug boot properly.
VW and Audi spark plug boots designed to seal and increase contact between the spark plug and spark plug wire.
With the increased seal and location of the boot,
this tool has been made to access and remove the spark plug boot.
Tool is approximately 10 inches (250mm) long.
Used to pull off the spark plug socket...SOME APPLICATIONS INCLUDE: 2.8 2.9L VR6 engines
VW Golf, Corrado and Passat.Also Audi 80, 100, A4, A6 with 2.6 and 2.8L V6 engines.
This is the correct tool for the job.You will most likely find OLD number 3277 or 3277A in your manuals but
T10029 is the CORRECT current Volkswagen Audi Tool number. 3277 is and old number and Volkswagen calls this a SPARK PLUG CONNECTOR TOOL.
read more:

7 in 1 Tool 8.50
7 in 1 TOOL
Includes Wire looper, steel wire cutter,
copper wire cutter, wire stripper,
crimping tool, hose clamp plier and inch/metric scale!
read more: