diesel timing tool SARASOTA diesel timing tool volvo cam tool -- mmk4mkt

2 Pins and 2 Plates 103.00

2 Pins and 2 Plates Set of four tools.VW Audi T.D.I. and New Beetle Cam Kit Reference numbers for the two tools on the left are: 3418 and 3359. Tool Set for factory correct and trouble free installations. This is a popular set for Diesel timing of Bosch injection pumps. This set has been developed for aligning the cam shaft with the Diesel pump on 1998 and newer VW models equipped with a T.D.I. engine. This two piece lock plate and alignment pin allows the technician for factory correct and trouble free installations.

Tools on the right side of image are Diesel Lock Plate / Cam Setting Bar Same as Volkswagen ref 2065a Tool used for securing the cam shaft from rotating and maintaining correct timing position engine AAZ during R&R of cam shaft drive belt. Applicable: VW/Audi diesel and Volvo 6 cylinder 2.4L diesel 1981 86 Lock Pin for Diesel (Same as VW tool 2064). Tool used for securing Bosch diesel injection pump sprocket from rotating during R&R of cam shaft drive belt. This Locking Pin also assists in locating the general timing position of pump. Volkswagen Audi diesel and Volvo 6 cylinder 2.4L diesel 1981 86 All 4 tools are High Quality Made in Europe!

Locking Pin and Plate 26.50

Set of two tools including:2065A Diesel Cam Shaft Locking PlateThis locking Plate (above) is the same as vw tool 2065a Used for securing the cam shaft from rotatingand maintaining correct timing position during R&R of cam shaft drive belt.Applicable:All VW/Audi Diesel and Volvo 6 cylinder 2.4L diesel '81 '86 engines. PLUS:2064 Lock Pin for Diesel This Locking Pin is used forsecuring Bosch diesel injection pump sprocket from rotatingduring R&R of cam shaft drive belt.This Pin also assists in locating the general timing position of pump.Applicable: All VW/Audi diesel engines.

Dial Indicator Holder 37.50

Indicator Holder
This is the tool you need if you have been searching for a holder that will accomodate your indicator ONLY IF YOUR INDICATOR HAS A SHANK SIZE OF 3/8
MOST OF THE OTHER HOLDERS ON THE MARKET ARE FOR 8MM SHANK.
THIS IS FOR 3/8
IF YOU SEE A COPY OR A CHEAP IMITATION OF THIS ITEM WITH THESE DIMENSIONS YOU CAN BE SURE IT IS NOT A QUALITY TOOL!
This is a Quality Holder you will not find a tool (with these dimensions) at a better price anywhere!
Used for the accurate setting of the Bosch diesel fuel injection pump timing.
The Holder screws into the back of the injection pump,
giving a dial indicator reading necessary for setting
the correct pump timing.
This tool will help you complete your set having the correct tools for the job is important to any serious mechanic!
Included with the Holder is the 10cm Dial Indicator Extension Pin,
making the timing easy to set,
as the timing has a range from 0.83mm to 1.15mm.

Timing Tools (2) 88.50

New Beetle and T.D.I. Cam Kit Tool Set for factory correct and trouble free installations. This is a popular set for Diesel timing of Bosch injection pumps.This set has been developed for aligning the cam shaft with the Diesel pumpon 1998 and newer VW models equipped with a T.D.I. engine.This two piece lock plate and alignment pin allows the technician for factory correctand trouble free installations Reference: 3418 and 3359.

TDI Cam Kit 2 Tools 88.50
T.D.I.
New Beetle Cam Kit
Tool Set for factory correct and trouble free installations. This is a popular set for Diesel timing of Bosch injection pumps.This set has been developed for aligning the cam shaft with the Diesel pumpon 1998 and newer VW models equipped with a T.D.I. engine.This two piece lock plate and alignment pin allows the technician for factory correctand trouble free installations.
Reference: VW numbers 3418 and 3359.
read more:

Timing Kit Master Set 1 254.00

Serious Master Set: Description (for upper 3 tools) Timing belt on engine ALH. Chassis 1999 1/2 thru 2003 Golf Jetta (A4) MKIV and New Beetle TDI thru 2003.Reference numbers for the three tools are 3418 (Left side of image above) 3359 (Pin Center) and T10020 (Wrench Right. This is a popular set for Diesel timing of Bosch injection pumps. This set has been developed for aligning the cam shaft with the Diesel pumpon 1998 and newer VW models equipped with a T.D.I. engine.

BELOW IS THE DESCRIPTION ON THE LOWER 5 TOOLS. Five tools: vw 3032, 2066, 2065A, 2064 and 12717 (Pin Wrench) Details: 3032 Injection Pump Tool Puller used for the proper extraction of injection pump drive gear. Applicable: VW / Audi diesels : 2066 Used for accurate adjustment of Bosch diesel injection pump. 2065A Diesel Camshaft Locking Plate Tool 2064 Lock Pin for Diesel. Pin Wrench 121717 Made in Germany for easy adjustment of Camshaft spur belts (toothed belt) on idler Pulleys with Pin holes. This wrench with its protruding pins, grabs the center of idler pulley and rotates around the off center retaining bolt allowing for belt tension adjustment (Tension Pulleys) 4 cylinder Golf, Jetta, Passat and Corrado. Audi 80. You will get all 8 tools shown here.

Locking Pin Only 9.50
Lock Pin for Diesel 2064 For securing Bosch injection pump sprocket from rotatingduring R&R of cam shaft drive belt. This Pin also assists in locating the general timing position of pump.Applicable: All VW Audi diesel engines. Volvo D24
read more:

Timing Belt Tensioner 44.95

Volvo Timing Belt Tensioner Tool with 6mm Hex Adjuster.On the 1998 and later Volvo engines the timing belt tensioner is located down near the bottom of the engine in a hard to reach area. This uniquely designed tool reaches down and rotates the 6mm hex adjuster on the timing belt tensioner so that one technician can easily set the correct tension preload and tighten the lockdown bolt. This unique tool works on all engines 98 and later with the 6mm allen adjuster and includes: 4 Cylinder, 1.9L, 5 Cylinder, 2.3L, 2.4L, 2.5L, 6 Cylinder, 2.8L, 2.9L

T.D.I. Timing Kit 3 Tools 115.50

T.D.I. and New Beetle Cam Kit for correct and trouble free installations. Three crucial tools for changing timing belt on engine ALH. Chassis 1999 1/2 thru 2003 Golf Jetta (A4) MKIV and New Beetle TDI thru 2003.Reference numbers for the three tools are 3418 (Left side of image above) 3359 (Pin Center) and T10020 (Wrench Right)
This is a popular set for Diesel timing of Bosch injection pumps.This set has been developed for aligning the cam shaft with the Diesel pumpon 1998 and newer VW models equipped with a T.D.I. engine. Lock plate and alignment pin allows the technician for factory correctand trouble free installations.

Dial Indicator and Holder 98.50

Bosch Diesel Injection Pump
Timing Indicator Tools.
With High Quality Dial Indicator Made in Germany!
You will not find this price anywhere except Zdmak!
Tools are used for the accurate setting of
the Bosch diesel fuel injection pump timing.
The Holder screws into the back of the injection pump,
giving a dial indicator reading necessary for setting
the correct pump timing.
This set comes complete with the correct tools for the job!
Contents: Metric Dial Indicator Made in Germany,
plus holder plus the 10cm dial indicator extension pin,
making the timing easy to set,
as the timing has a range from 0.83mm to 1.15mm.
For use on VW and Audi diesels.
Also works with 1981 1986 Volvo 6 cyl 2.4L diesels,
1989 1994 Dodge 6 cyl 5.9L diesels.

FYI FOR PEOPLE WHO DECIDE "NOT" TO USE THIS SET
Here is some helpful info...Universal conversion factor for milimeters into decimal inches is .03937
EXAMPLE: 13mm X .03937= .5118"

Cam Locking Plate Only 16.99
Cam Shaft Locking Plate 2065AUsed for securing the cam shaft from rotatingand maintaining correct timing position during R&R of cam shaft drive belt.All VW Audi Diesel and Volvo D24 6 Cylinder 2.4L diesel 1981 86 engines.
read more:

Factory Brake Caliper Tool 98.50
T10165 Brake Caliper Tool
The old number for this tool was 3272
(discontinued)
T10165 is the correct current factory number for this tool.
Brand New Tool
Made in Germany.
Some Vehicles include: Beetle 1.8 Turbo
(see your manual for exact year model applications tool number T10165 or old number 3272 same as T10165)
Beetle 4 CYL , Beetle TDI Diesel , Corrado SLC V6 ,
Golf Cabrio IV GL , Golf Cabrio IV GLX , Golf III GL 4 CYL ,
Golf III GTI 4 CYL , Golf III GTI VR6 , Golf III TDI Diesel , Golf IV 4 CYL ,
Golf IV GL 4 CYL , Golf IV GLS 4 CYL, Golf IV GTI 1.8 Turbo ,
Golf IV GTI VR6 AFP , Golf IV TDI Diesel , Golf IV VR6 AFP ,
Jetta III GL 4 CYL , Jetta III GLS 4 CYL , Jetta III GLX VR6 ,
Jetta III TDI Diesel , Jetta IV 1.8 Turbo , Jetta IV GL 4 CYL ,
Jetta IV GLS 4 CYL , Jetta IV GLS VR6 AFP , Jetta IV GLX VR6 AFP,
Jetta IV TDI Diesel , Jetta Wagon 1.8 Turbo , Jetta Wagon 1.9 TDI ALH ,
Jetta Wagon 4 CYL AZG / AVH, Passat TDI Diesel ,
Passat V6 30V AHA / ATQ , PassatTurbo 20V AEB
read more:

Set of 4 with Indicator 63.50
"Baby Grand"
Set of 4 Tools
Including Dial Indicator
Plus VA6015 Diesel ToolUsed for accurate adjustment of Bosch diesel injection pump.This Dial Gauge Holder screws into the back of theinjection pump and comes equipped with a 10cm dial indicator extension pin. This tool is to be used in conjunction with a dial indicator.(not included).Applicable:All VW/Audi Diesel and Volvo 6 cylinder 2.4L diesel '81 '86 engines.
PLUS 2065A Diesel Cam Shaft Locking Plate
PLUS 2064 Pin.
read more:

Pin , Plate and Holder 51.99
Set of three tools including:VA6015 Diesel ToolUsed for accurate adjustment of Bosch diesel injection pump.This Dial Gauge Holder screws into the back of theinjection pump and comes equipped with a 10cm dial indicator extension pin. This tool is to be used in conjunction with a dial indicator.(not included).Applicable:All VW/Audi Diesel and Volvo 6 cylinder 2.4L diesel '81 '86 engines. PLUS 2065A Diesel Cam Shaft Locking Plate 2065aPLUS 2064 Locking Pin
read more:

Brake Caliper Tool 110.00

T10165 Brake Caliper Tool
The old number for this tool was 3272
(discontinued)
T10165 is the correct current factory number for this tool.
Brand New Tool
Made in Germany.
Some Vehicles include: Beetle 1.8 Turbo
(see your manual for exact year model applications tool number T10165 or old number 3272 same as T10165)
Beetle 4 CYL , Beetle TDI Diesel , Corrado SLC V6 ,
Golf Cabrio IV GL , Golf Cabrio IV GLX , Golf III GL 4 CYL ,
Golf III GTI 4 CYL , Golf III GTI VR6 , Golf III TDI Diesel , Golf IV 4 CYL ,
Golf IV GL 4 CYL , Golf IV GLS 4 CYL, Golf IV GTI 1.8 Turbo ,
Golf IV GTI VR6 AFP , Golf IV TDI Diesel , Golf IV VR6 AFP ,
Jetta III GL 4 CYL , Jetta III GLS 4 CYL , Jetta III GLX VR6 ,
Jetta III TDI Diesel , Jetta IV 1.8 Turbo , Jetta IV GL 4 CYL ,
Jetta IV GLS 4 CYL , Jetta IV GLS VR6 AFP , Jetta IV GLX VR6 AFP,
Jetta IV TDI Diesel , Jetta Wagon 1.8 Turbo , Jetta Wagon 1.9 TDI ALH ,
Jetta Wagon 4 CYL AZG / AVH, Passat TDI Diesel ,
Passat V6 30V AHA / ATQ , PassatTurbo 20V AEB

Pin T.D.I. Only 22.99
Pin only Number 3359 for Diesel timing of Bosch injection pumps 1998 and newer VW models equipped with a T.D.I. engine.
read more:

Cam Kit 2 Tools 88.50

Cam Spoke Lock Device 85.00
Twin and Quad Cam Spoke Lock Device
Universal Twin Cam Number 2727Used for securing Twin Cam Pulleys.
Applicable: All twin or quad cam engines with timing belt pulley sprocket on each cam.Used for the crucial task of securing twin cam pulleys from rotating during the R&R of timing belt. Fully adjustable, this tool comes complete with 1 pair 8" and 1 pair 4.5" long, Left/Right hand threaded rods.The shorter needed for confined spaces where the rods might interferewith the fire wall or other auto part. Fully constricted onto the spokesof the cam pulleys and locking down the securing wing nuts,reveals a 6 point locking mechanism.This tool will remain rigid, not allowing for any movement of cams, saving your timing.Please note:With Quad cam pulley engines 2 sets of tool 2727 are needed to complete the task.All Twin or Quad cam equipped with a timing belt pulley sprocket on each cam.
read more:

BigMak Timing Kit 196.00

Master Kit
Set of 6 Tools
Including Dial Indicator

Set Includes:
3032 Injection Pump Tool Puller used for the proper extraction of injection pump drive gear. Applicable: Volvo and VW / Audi diesels Excluding TDI
PLUS: VA6015 Holder used for accurate adjustment of Bosch diesel injection pump.
Plus: 2065A Diesel Camshaft Locking Plate Tool
PLUS: 2064 Lock Pin for Diesel.
Plus the Pin Wrench (made in Germany) for easy adjustment of Camshaft spur belts (toothed belt) on idler Pulleys with Pin holes. This wrench with its protruding pins, grabs the center of the idler pulley and rotates around the off center retaining bolt allowing for easy belt tension adjustment. Tension Pulleys on 4 cylinder Golf, Jetta, Passat and Corrado. Audi 80.
Plus Dial Indicator

Holder ONLY 37.50
Dial Gauge Holder VA6015Diesel Tool Used for accurate adjustment of Bosch diesel injection pump. (SAME AS VW TOOL 2066)
I only sell one holder (size) and this is it...same as 2066)
This Dial Gauge Holder screws into the back of theinjection pump and comes equipped with a 10cm dial indicator extension pin. This tool is to be used in conjunction with a dial indicator (not included).All VW Audi diesel and Volvo D24 6 cylinder 2.4L diesel 1981 86 engines. This holder will only work with a dial guage with a shank size of 8mm or less.
It will NOT work with a lager shank.
read more:

Cam Bar for 5 Valve 129.50

Camshaft Timing Tool Securing Bar
TOOL REF 3391
Cam Securing Bar Holder
V6 / 5 valves per cylinder/
used for the crucial task of securing both engine banks/
camshafts at T.D.C when replacing the timing belt/
to properly align camshaft during timing belt change /head assembly work.
Applicable VW Audi V6 5 Valve 1998 2003
Cam/Bar Holder Not Applicable 3.0 (2002 4 cam)
Please note: 3391 for 5 valves per cylinder.

Bar and Pin for 5 Valve 139.50

Camshaft Timing Tool Set (2)
TOOL REF 3391
Cam/Bar Holder
V6 / 5 valves per cylinder/
used for the crucial task of securing both engine banks/
camshafts at T.D.C when replacing the timing belt/
to properly align camshaft during timing belt change /head assembly work.
Applicable VW Audi V6 5 Valve 1998 2003
Cam/Bar Holder Not Applicable 3.0 2002 4 cam.

TOOL REF 3242
Crankshaft T.D.C. Lock Pin
Holds crankshaft at top dead center
For installing or removing toothed belt /flywheel drive plate.
T.D.C. Pin Applicable: A4 A6 Volkswagen Passat
Engine Applicable: Volkswagen AHA BDP ATQ BCY
Audi AAH AFC ATQ AHA AKB ART AUX BFM BHF BNK BSB AVK AWN AYS BBD BCY & BEL
T.D.C. Pin Not Applicable 3.0 V6Please note: 3391 for 5 valves per cylinder.

Locking Pin 9.50

Lock Pin for Diesel 2064 For securing Bosch injection pump sprocket from rotatingduring R&R of cam shaft drive belt. This Pin also assists in locating the general timing position of pump.Applicable: All VW Audi diesel engines. Volvo D24

Cam Spoke Lock Device 79.00

Twin and Quad Cam Spoke Lock Device
Universal Twin Cam Number 2727Used for securing Twin Cam Pulleys.
Applicable: All twin or quad cam engines with timing belt pulley sprocket on each cam.Used for the crucial task of securing twin cam pulleys from rotating during the R&R of timing belt. Fully adjustable, this tool comes complete with 1 pair 8" and 1 pair 4.5" long, Left/Right hand threaded rods.The shorter needed for confined spaces where the rods might interferewith the fire wall or other auto part. Fully constricted onto the spokesof the cam pulleys and locking down the securing wing nuts,reveals a 6 point locking mechanism.This tool will remain rigid, not allowing for any movement of cams, saving your timing.Please note:With Quad cam pulley engines 2 sets of tool 2727 are needed to complete the task.All Twin or Quad cam equipped with a timing belt pulley sprocket on each cam.

Pin Wrench Set 2 49.00

This is the Best Quality Set of the two CRUCIAL VW Audi Pin Wrenches you will find anywhere.
SUPER HIGH QUALITY TOOLS (BOTH) MADE IN GERMANY BY HAZET.
First item is number V159 (this is a smaller tool on the left side picture is not to scale) This tool is for easy adjustment of Camshaft spur belts
(toothed belt) on idler pulleys with Pin holes. This wrench with its protruding pins, grabs the center
of the idler pulley and rotates around the off center retaining bolt allowing for easy belt tension adjustment.
Tension Pulleys on 4 cylinder Golf, Jetta, Passat and Corrado. Audi 80
Distance of pins 18 mm, diameter of pins 2.9 mm for deep located idler pulley
on toothed belt on 1,6 l diesel engine VW van T3 (up to model 1991).
V159 is the correct number the old VW Number on this (smaller) tool was 2587.

T10020 Special wrench with an offset (angled) head (Larger tool on right side of image)
This tool also used for adjusting timing belt tension.
99 and later VW Golf, VW Jetta and Beetle with 2.0 Litre Gas and 1.9 Litre TDI Engines.1999 and newer Golf, Jetta
New Beetle with 2.0l gas engine and 1.9l T.D.I. Diesel engine. You will get both tools with this purchase.

Pump Tool plus Pin , Plate and Holder 127.99

Set of 4 tools including:3032 Injection Pump ToolPuller used for the proper extraction of injection pump drive gear.Applicable: Volvo and VW / Audi diesels Excluding TDI * PLUS: VA6015 Used for accurate adjustment of Bosch diesel injection pump.PLUS: 2065A Diesel Camshaft Locking Plate Tool PLUS: 2064 Lock Pin for Diesel

Dial Gauge Holder 37.50

Dial Gauge Holder VA6015Diesel Tool Used for accurate adjustment of Bosch diesel injection pump. (SAME AS VW TOOL 2066)
This Dial Gauge Holder screws into the back of theinjection pump and comes equipped with a 10cm dial indicator extension pin. This tool is to be used in conjunction with a dial indicator (not included).All VW Audi diesel and Volvo D24 6 cylinder 2.4L diesel 1981 86 engines. This holder will only work with a dial guage with a shank size of 8mm or less.
It will NOT work with a larger shank.

36mm Oil Filter Wrench 39.99

BMWMINI COOPER TOOL Mercedes Benzdiesel oil filter wrench.
This is the same as Mercedes item 606 589 01 09 00. Works on BMW and Mercedes
This tool is 6 point size 36mm shallow socket 3/8" drive.
Heavy duty construction. It is made by Hazet for Mercedes and BMW.
Good for engine OM606 used in 1995 W124 E300 diesel, 96 97 W210 E300 diesel,
and 1998 E300 turbodiesel. Also for MB Diesel Engines OM604, OM605
and BMW Mini, BMW M52 6 Cyl., M60 8 cyl., M70 12 cyl and Volkswagen VR6.
Some other applications include:
Mercedes diesel engines: OM604, OM605, OM606 1995 W124 E300 diesel,
1996 97 W210 E300 diesel, 1998 E300 turbo diesel.
BMW Mini Cooper, BMW M52 6 cyl, BMW M60 8 cyl, BMW M70 12 cyl.
VW Volkswagen VR6
Ford Truck 6.0L 2003 thru 2004
High Quality Hazet Tool Made in Germany!

Cam Shaft Locking Plate 16.99

Cam Shaft Locking Plate 2065AUsed for securing the cam shaft from rotatingand maintaining correct timing position during R&R of cam shaft drive belt.All VW Audi Diesel and Volvo D24 6 Cylinder 2.4L diesel 1981 86 engines.

36mm Oil Filter Socket Wrench 39.99

Pin , Plate and Holder 64.00

Set of three tools including:VA6015 Diesel ToolUsed for accurate adjustment of Bosch diesel injection pump.This Dial Gauge Holder screws into the back of theinjection pump and comes equipped with a 10cm dial indicator extension pin. This tool is to be used in conjunction with a dial indicator.(not included).Applicable:All VW/Audi Diesel and Volvo 6 cylinder 2.4L diesel '81 '86 engines. PLUS 2065A Diesel Cam Shaft Locking Plate 2065aPLUS 2064 Locking Pin

V8 Camshaft Securing Bar 135.00

V8 Timing Tool T40005
Camshaft Securing Bar Audi A6 / A8
Used for the crucial taskof securing both engine banks, cam shafts at T.D.Cwhen replacing the timing belt.

Crankshaft Stop 59.50

Crankshaft Stop Original Factory Tool Made in Germany: 4 Cyl. diesel engine (1.9 l and 2.0 l engine, 2 and 4 valve. Fixing the crankshaft in place at the oval crankshaft pulley when adjusting the valve timing TDC marking at 1 oclock. (Use of the oval belt pulley will be gradually introduced).

Big Mak 126.00
Master Kit
Set of 6 Tools
Including Dial Indicator

Set Includes:
3032 Injection Pump Tool Puller used for the proper extraction of injection pump drive gear. Applicable: Volvo and VW / Audi diesels Excluding TDI
PLUS: VA6015 Holder used for accurate adjustment of Bosch diesel injection pump.
Plus: 2065A Diesel Camshaft Locking Plate Tool
PLUS: 2064 Lock Pin for Diesel.
Plus the Pin Wrench (made in Germany) for easy adjustment of Camshaft spur belts (toothed belt) on idler Pulleys with Pin holes. This wrench with its protruding pins, grabs the center of the idler pulley and rotates around the off center retaining bolt allowing for easy belt tension adjustment. Tension Pulleys on 4 cylinder Golf, Jetta, Passat and Corrado. Audi 80.
Plus Dial Indicator
read more:

Set of 5 with Indicator 123.99
"Grand Master"
Set of 5 Tools
Including Dial Indicator
Plus 3032 Injection Pump Tool
Puller used for the proper extraction of injection pump drive gear.
Applicable: Volvo and VW / Audi diesels Excluding TDI *
PLUS: VA6015 Used for accurate adjustment of Bosch diesel injection pump.
PLUS: 2065A Diesel Camshaft Locking Plate
PLUS: 2064 Pin.
read more:

Audi Info and Timing 0.00

There are three main Cam bars for timing.
3391, 3243 and T40005
(T40005 is for V 8)
Notice the tool number 3242 this is the T.D.C (TOP DEAD CENTER) Pin
This pin goes with 3391 or 3243.
Type your selection in the search or you can find the tools in this Audi section.
Feel free to call me or email. I will try to assist you.
Please note:
In order to make your selection you must determine if your vehicle is 2 valve per cylinder or 5 valve per cylinder or V8. Example = Notice tool number 3391 says it is for 5 valve. The 3243 is for 2 valve per cylinder.

Engine Turning Bar Double Row Timing Chains 55.50

Engine Turning Bar used for adjusting valves and timing.Applicable: BMW with dual timing chains.

Timing & Cam Tools 0.00

Please note: There are three main Cam bars for timing.
Choose from 3391
3243
and T40005 (the T40005 is for V 8)
Notice the tool number 3242, this is the T.D.C TOP DEAD CENTER Pin. This pin goes with 3391 or 3243. Type your selection in the search or you can find the tools in this section. You should refer to a manual if one is available to you, or feel free to call me or email. I will try to assist you. Please note:
In order to make your selection you must determine if your vehicle is 2 valve per cylinder or 5 valve per cylinder or V8. Example = Notice tool number 3391 says it is for 5 valve. The 3243 is for 2 valve per cylinder.

Double & Single Row Set up Complete 270.00

Master Link Timing Chain Tool
Single Row and Double Row Set up.
Used for proper assembly of timing chain master link.
OM601, OM602, OM603, OM615, OM616, OM617
(also M102, M103 AND M116)
You will get all (3) bits for double and single row.
Picture above is for reference only.

Engine Turning Bar Single Row Timing Chain 92.50

Engine Turning Bar used for adjusting valves and timing.Applicable: BMW and 6 cyl engines with a single timing chain

Cam Bar for 2 Valve 129.50

Camshaft Securing Bar Timing Tool
TOOL REF 3243
Cam/Bar Holder 2 valves per cylinder/
Used for the crucial task of securing both engine banks/
camshafts at T.D.C when replacing the timing belt/
to properly align camshaft during belt change head assembly work.
Applicable Audi 90 A6 A4 94 97 AFC Engine
Please note: 3243 Securing Bar for2 valves per cylinder.

Spanish Timing Manual 49.00
Description:
2002 Spanish Version
Timing Belt Manual
read more:

17mm Diesel Tool 71.50

17mm 1/2 Drive for Cylinder Headbolts on Diesel.
Overall Length is 110mm.

Chain Sprocket Tool 31.00

P204 Chain Sprocket Tool Used for securing the chain sprocket and preventing chain slippagethis tool is important when replacing tensioners or setting cam timing. 911 930.

Pin Only 3359 T.D.I. 22.99

Pin only Number 3359 for Diesel timing of Bosch injection pumps 1998 and newer VW models equipped with a T.D.I. engine.

Set 3 BMW Tools 125.00

Set 3Repair Tools for BMW
Alignment Jig Number 113240
Pin Number Number 112300
Tensioner Number 113390

Used for setting cam shaft timing.
Kit includes (2) blocks (1) swivel lock and (1) locator pin.
Applicable: BMW engine M42, M44, M50, M52, M52TU.
The ref number for the Jig ( 2 blocks) 113240
and the Pin is 112300RigidChain Tensioner 113390 Ref: BMW Tool 90 88 6 113 390
Tool is used for tensioning primary chain when adjusting valve timing.
Late model V8 Applicable: M50, M60, M62

Winner gets all tools pictured.

Pin Wrench T.D.I. 26.99
Pin Wrench Angle Type
NUMBER T10020 VW AUDI TENSION PULLEY SPANNER WRENCH
This unique tool is for 1998 and later VW and Audiwhich require spanner wrench adjustments to the timing belt.
read more:

Tensioner Tool 12.99

P214 Used for securing tensioners in their retracted position during installation.This tool helps keep the chain timing correct during this procedure.911 with factory tensioners (Excluding pressure fed types)

114230 Rigid Chain Tensioner 29.50

Rigid Chain TensionerBMW114230Ref: BMW Tool 90 88 6 114 230
Tool is used for tensioning primary chain when adjusting valve timing.
Late model V8 Applicable: M50, M60, M62.

Puller, Pin , Plate , Holder , Pin Wrench 146.00

Set of five tools: vw 3032, VA6015 PLUS 2065A PLUS 2064 PLUS 12717
Details:
3032 Injection Pump Tool Puller used for the proper extraction of injection pump drive gear. Applicable: Volvo and VW / Audi diesels Excluding TDI * PLUS: VA6015 Used for accurate adjustment of Bosch diesel injection pump. PLUS: 2065A Diesel Camshaft Locking Plate Tool PLUS: 2064 Lock Pin for Diesel. Plus the Pin Wrench (made in Germany) for easy adjustment of Camshaft spur belts (toothed belt) on idler Pulleys with Pin holes. This wrench with its protruding pins, grabs the center of the idler pulley and rotates around the off center retaining bolt allowing for easy belt tension adjustment. Tension Pulleys on 4 cylinder Golf, Jetta, Passat and Corrado. Audi 80.

You Searched for

diesel timing tool

Trade Links With ZDMAK