benz tool SARASOTA benz tool mercedes coil spring compressor -- mmk4mkt

Hazet 2769 Set 2 69.00

Hazet MercedesValve Adjustment Wrench Set of 2Made in GermanyThis two piece set includes: Item Numbers 2769 and 2769 1The 2769 is same as Benz Tool 601 589 0001 00The 2769 1 is same as Benz Tool 421 589 0001 00

Door Handlle Hinge Kit 79.50
Tool Kit for BENZ , VW , AUDI , PORSCHE door hinge/handle installer & remover.
Finally, a compact solution to accessing the special features found on the door hinges and door handles of VW/Audi, Mercedes Benz and Porsche, includes 4 door hinge bits (less than 1 inch long) with slender ratcheting wrench and extra long drivers for accessing Mercedes and VW door handle fasteners.
read more:

Mercedes and BMW Set 89.50

ON SALE 7 Pc Benz and BMW Tools Including 4 Mercedes Tools a BMW Holding Tool plus 2 Thin Wrenches.
Benz Tools are:
1.Hub Securing Bar 113 0040 Used for securing Waterpump hub from rotating during R&R of Fan clutch nut. This holder bolts onto the hub, as the poly v belt is not in place and cannot be used to lock the hub. Applicable:M112 & M113

2.Locking Hook needed for securing the visco fan couplingduring R&R of 8mm hex fastener w/o removing the radiator: Mercedes M103.

3.Wrench / Holding Bar. This is similar to Benz Number 900 589 0307 00 Comes complete with 8 and 10mm Allen bits.The 8mm is needed for R&R of fan clutch fastenerApplicable M103, 104, 111, 119, 120 OM 602, 603, 605, 606The 10mm is used for adjusting A/C belt tension and R&R of idler pulleyModels 420, 560 with V 819 86 and Newer
4. Thin Wrench 65mm with an 8mm overall thickness and an overall length of 16 inches for proper leverage. Mercedes ref: 120 589 0201 00

BMW Double Waterpump ToolThis special tool covers most popular applications used for securing Water Pump Hub from rotating during R & R of Fan Clutch NutApplicable:M10, M20, M30, M40, M41, M42, M50, M60, M62

Grand Master! Radio Tool Set 34.99

Master Radio Removal Tool Set
18 Piece Set includes the following tools needed to install and remove radios :. 2pc. Radio Removal U Hook (Ford/VW/Audi/Grundig/Blaupunkt) . 1pc. Special Pentagon Wrench (BMW). 4pc. Radio Removal Keys (VW/Audi/Becker/Mercedes Benz) . 2pc. Radio Removal Keys (Mercedes Benz/Porsche/Becker). 2pc. Radio Removal Keys (VW). 1pc. Allen Hex Wrench (BMW/Opel). 2pc. Radio Removal Keys (New Becker). 2pc. Radio Removal Keys (New Skoda). 2pc. Radio Removal U Hook (New Blaupunkt)

Hose Cutter 0.00
The current tools for cutting automotive radiator hoses include razor blades and hacksaws. Both of these tools are time consumingand leave ragged edges.They are increasingly inadequate as the hoses used in new cars become thicker and stronger.It will take about 10 15 minutes to cut a new Benz hose and the cut will not be straight and clean. Using a hacksaw will take as long and will have an unprofessional looking edge.This tool can make a straight and clean cut in barely a few seconds.This is a new tool every professional must have.Using this tool Hose Cutter is fast and easy. Getting the perfect cut however, does take some practice.Caution:Always keep the hose at a right angle to the blade. This blade is EXTREMELY SHARP! HANDLE WITH CARE! DO NOT CUT HOSE REINFORCED WITH STEEL WIRE. You will damage the blade!
read more:

MULTI SERVICE INTERVAL RESET TOOL 389.00

MULTI SERVICE INTERVAL RESET TOOL Number OR300 Reset tool is necessary for workshops to maintainand reset Mercedes Benz, BMW, Volvo, VW/Audi vehicles.With the large LCD display and the individual professional connectors, anyone can operate this tool clearly and easily just follow the instructions on the display.Convenient professional package comprises of the base unit, individual diagnostic connectorsand instruction manual in a small carrying case.
Readabout it Here

12mm Glow Plug Socket 69.98
12mm Universal Glow Plug Socket
6 Point Socket (with ball clamp)
chrome plated, square drive nominal size 10 = 3/8 inch,
with hinge joint, for 12 mm glow plugs esp. on
MERCEDES BENZ 201 and 202 with 4 valve,
also on OPEL, BMW and FORD
High quality tool Made in Germany by Hazet!
read more:

Oil Light Reset Tool 345.00

OTC Oil Light Reset Tool Kit
. Oil changes are the 1 service your shop will perform each year. Enhance your service with this complete electronic tool and manual kit, No. 3596. . This kit will eliminate the need to take the vehicle to the dealer or use an OEM scan tool to reset oil service lights. . Electronic tool set includes the adapters and interface module required to reset the oil service lights on Volkswagen, Audi, Mercedes Benz, BMW, and Volvo. . Manual includes oil light reset procedures for Domestic and Import vehicles not requiring electronic tools to reset, but have manual reset procedures. . A very complete, value packed kit at an affordable price. . Includes interface module, complete set of vehicle adapters, Domestic and Import manual reset procedure instruction manual, in a foam lined hard case.

AST Retriever 750.00

AST Retriever Scan Tool*
The ultimate diagnostic tool with interchangeable cartridges for the following European cars: BMW, Mercedez Benz, Saab, Volvo, VW/Audi. Easy to read 4 line 80 character display. Backlit display. Large keypad with audible feedback. Ergonomic shape. Interchangeable cartidges make updating easy. CARTRIDGES SOLD SEPERATELY, no cartidges included. Made in USA. Comes with blow molded case

Fuel Tool Mercedes Benz 39.50

Cup Wrench for Mercedes W202. Used to remove fuel sender retainer.

Hazet Quality Tools 28.99

Assembly Tool special steel, with T Handle,for mounting and dismounting the draw spring of hand brake shoese.g. on MERCEDES BENZ passenger cars with rear disk brakes

Hazet 2769 3 Mercedes 52.00

Hazet MercedesRetainer Wrench 2769 3 Hazet 2769 3 Same as Benz tool 615 589 0003 00

Clamp Plier Tool 0.00

Hazet Clamp Pliers with lug holding down device,
special steel, nickel plated.
For axle collar clamps on passenger cars,e.g. on VW AUDI, OPEL, BMW, MERCEDES BENZ, HONDA, NISSAN, MAZDA.

Heavy Duty 8mm Allen 27.95

Multiple applications for this handy tool.
Super Duty 8mm Allen Item P243 Extra Long 3/8 Drive SocketThis 8mm Extra Long Allen Socket is a solid one piece construction.Overall length is 7.75 inches.Used for R & R of some Benz Cylinder Headbolts,and some BMW C.V Joint Bolts,and Porsche Heat Exchange Exhaust sysetms 911 930 Porsche

Mercedes Locking Nut 39.95
Locking Nut M0039needed for securing the diesel injection pump cam shaft.Applicable:Mercedes OM601, OM602, OM603, OM605, OM606, OM617.Benz Ref: 601 589 0521 00
read more:

T.D.C. Tool 0.00
Top Dead Center Tool
Number 2588 1 Belt Changing Tool.
Should be used with 2588 2 and 2588 3. Call for more info.
High Quality Tool Made in Germany.
read more:

12 Pack Air Tool Oil 19.99
12 Pack Air Tool Oil.
Specially Formulated for use in all piston type and rotary air tools, as well as in line air lubricators. Prevents rust formation while providing positive lubrication for smooth starting and longer tool life. Assures maximum performance by dissolving gum and sludge that cut down tool speed and reduce power output. ( Marvel 12 Pack)
read more:

Press tool 401 0.00
High Quality German Made
Volkswagen Press Tool for assembly work.
Original Factory Tool.
read more:

Volkswagen Door Tool 9.99

T10011Volkswagen Door Tool triple Square 4
This is the correct tool for the job
New Beetle Tool This tool is used for R & R of door handle screws.Applicable: 1998 & newer VW Golf, Jetta, Passat & New Beetle....possibly other VW Audi.
This tool is a high quality item you will like.

36mm Oil Filter Wrench 15.99

Special 36mm Oil Filter Wrench Removes and installs filters on BMW Mini Cooper. The low profile socket fits 36mm fuel and oil filters. The low profile socket works in confined spaces. 3/8 in. drive Not for use with an impact wrench.
BMW Mini Cooper, BMW M52 6 cylinder, BMW M60 8 cylinder, BMW M70 12 cylinder.
Mercedes Benz diesel engines: OM604, OM605, OM606 (1995 W124 E300 diesel, 96 97 W210 E300 diesel, 1998 E300 turbodiesel).
Same as Mercedes tool number: 606 589 01 09 00VW Volkswagen VR6
Also for Ford Truck 6.0L 03 04

End Play Kit 00
This tool has isdesigned to measure the end play movement
of the VW crankshaft without the use of a dial indicator.
All that is necessary is a feeler gauge set and this tool.
With the tool bolted to the end of the case, the feeler guage
measures the gap created by the end play.
The taking of this end measurement is necessary whenever a VW engine is rebuilt
to prevent the rear main bearing from seizing up.
A must for rebuilding one engine or many,
this tool works on all air cooled VW engines and Porsche 912 & 914 models.
read more:

BMW Radio Tool 15.00

Very popular BMW Radio Removal Tool.
Pentagon shaped tool with 5 Sides.
The overall length of this tool is 3 5/8 inches.
Applicable: Most BMWs.
Including E38 E39 7 Series etc...
This tool is used to release anti theft radio mounts.

7 Way Crimping Tool 8.99
7 WAY CRIMPING TOOL
Wire cutter, terminal crimper & wire stripper in one handy tool
Black anodized finish with insulated hand grips
Crimp slot on end of tool secures most ignition terminals including "W" type, right angle and "High Tower" terminals
Crimps 7mm to 8.5mm ignition wire
Works with 10 22 gauge solderless terminals
read more:

Klein Tool Bag 94.50
Klein Tool Bag
Number 5002 20
20" Tool Bag, No. 8 natural canvas with vinyl 20" (51 cm) 6" (15 cm) 15" (38 cm)

Klein offers a full line of Tool Bags. With the addition of two 20" bags you can now carry more tools and products. The 5003 series has shoulder strap mounts for use with the new shoulder strap. The canvas tool line has tool bags in lengths of 16" (8 interior pockets), 18" (10 interior pockets) and the new 20" (14 interior pockets) with choices in either leather or vinyl bottoms. Now carry all of your tools the most convenient way for you!
read more:

Klein Tool Bag 89.99
Klein Tool Bag
Number 5003 16
16" Tool Bag, No. 8 natural canvas with leather 16" (41 cm) 6" (15 cm) 14" (36 cm)

Klein offers a full line of Tool Bags. With the addition of two 20" bags you can now carry more tools and products. The 5003 series has shoulder strap mounts for use with the new shoulder strap. The canvas tool line has tool bags in lengths of 16" (8 interior pockets), 18" (10 interior pockets) and the new 20" (14 interior pockets) with choices in either leather or vinyl bottoms. Now carry all of your tools the most convenient way for you!
read more:

Spark Plug Boot Tool 32.99
Spark Plug Boot Tool
Due to restricted space the T10029 will install the spark plug boot properly.
VW and Audi spark plug boots designed to seal and increase contact between the spark plug and spark plug wire.
With the increased seal and location of the boot,
this tool has been made to access and remove the spark plug boot.
Tool is approximately 10 inches (250mm) long.
Used to pull off the spark plug socket...SOME APPLICATIONS INCLUDE: 2.8 2.9L VR6 engines
VW Golf, Corrado and Passat.Also Audi 80, 100, A4, A6 with 2.6 and 2.8L V6 engines.
This is the correct tool for the job.You will most likely find OLD number 3277 or 3277A in your manuals but
T10029 is the CORRECT current Volkswagen Audi Tool number. 3277 is and old number and Volkswagen calls this a SPARK PLUG CONNECTOR TOOL.
read more:

7 in 1 Tool 8.50
7 in 1 TOOL
Includes Wire looper, steel wire cutter,
copper wire cutter, wire stripper,
crimping tool, hose clamp plier and inch/metric scale!
read more:

Valve Spring Tool & Bridge 142.50

Valve Tools (2)
Set including:Valve Spring Compressor Bar
Same as Volkswagen Tool Number VW 541/1
Used for R&R of valve spring or rocker armWith this tool the job can be done with the cylinder head on or off the car.Used in conjunction with tool BridgeApplicable: 924 / 944 VW AUDI 4 5 Cyl. VA6022Support Bridge Same as VW Tool 2036 Used for R&R of valve spring or rocker armUsed in conjunction with tool VW541/1Applicable: Model 924. VW / AUDI 4 5 Cyl.

Valve Spring Tool and Bridge 142.50

Valve Spring Tools Set including:VA6010Valve Spring Compressor BarSame as Volkswagen Tool Number VW 541/1Used for R&R of valve spring or rocker armWith this tool the job can be done with the cylinder head on or off the car.Used in conjunction with tool BridgeApplicable: 924 / 944 VW AUDI 4 5 Cyl. VA6022Support Bridge Same as VW Tool 2036 Used for R&R of valve spring or rocker armUsed in conjunction with tool VW541/1Applicable: Model 924. VW / AUDI 4 5 Cyl.

12 Pack 32 oz Air Tool Oil 64.99
32 oz 12 Pack MVL085
Specially Formulated for use in all piston type and rotary air tools, as well as in line air lubricators. Prevents rust formation while providing positive lubrication for smooth starting and longer tool life. Assures maximum performance by dissolving gum and sludge that cut down tool speed and reduce power output. ( Marvel 12 Pack)
read more:

BMW Center Cap Tool 8.99

BMW Center Cap Tool.Made in Germany
Tool used to remove and install center caps on several BMW.
Drive size is 17mm
Tool is 3 7/16 inch wide.
BMW NUMBER 36 13 1 180 626

Stubby 3/8 X 1/2 Ratchet 23.99
Short Pattern Double Drive 3/8 X 1/2
Flexible Head "Stubby" Ratchet
Comfortable rubber cushion grip handle Features 72 gear teeth for speed & durability Chrome vanadium steel construction.
Saves space in the tool pouch or tool box,
saves time looking for a tool
and saves money!
read more:

3 pc. Fold Up Tool Set 45.99

3 pc. Fold Up Tool Set
3 fold up tools all made of high alloy CVM steel, hardened, with a molded ergonomic handle. 7 tool PocketStar: Torx sizes: T7, T8, T9, T10, T15, T20, T25. 7 tool MagicRing Metric PocketStar: 2, 2.5, 3, 4, 5, 6 and 8mm. 9 tool MagicRing Inch PocketStar: sizes 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4 in
Satisfaction Guaranteed Made In Germany!

VW803 19.99
Sorry No Picture
FACTORY TOOL
In Stock Now!
Call if you need more info on this tool.
read more:

VW276 49.99

Sorry No Picture

FACTORY TOOL MADE IN GERMANY

In Stock Now!
Call if you need more info on this tool.
read more:

VW801 49.99

Sorry No Picture

FACTORY TOOL MADE IN GERMANY

In Stock Now!
Call if you need more info on this tool.
read more:

VW243 39.99

Sorry No Picture

FACTORY TOOL MADE IN GERMANY

In Stock Now!
Call if you need more info on this tool.
read more:

VW273A 125.00

Sorry No Picture

FACTORY TOOL MADE IN GERMANY

In Stock Now!
Call if you need more info on this tool.
read more:

Power Lifter Pickup Tool 18.50
Pick up Tool 19 inch long with lift cap 1.5lbs.
read more:

VW244B 125.00

Sorry No Picture

FACTORY TOOL MADE IN GERMANY

In Stock Now!
Call if you need more info on this tool.
read more:

Super Duty Disc Brake Tool 0.00
Heavy Duty Brake Tool
For safe resetting of disc brake pistons
on vehicles with fixed caliper disc brakes.
Extremely High Quality Tool Made in Germany.
Call for more info.
read more:

Trunk Tool Kit Plier 28.50

Waterpump Plier for Trunk Tool Kit
Brand New Factory Tool
Made in Germany by Heyco
Stamped Heyco BMW on raised panel.
The overal length of this tool is 7 3/4 inch at smallest setting (the length when fully open is 8 7/16.
The tray opening will be close to 7 3/4.
Replace your missing Pliers with this Factory original Tool!
BMW NUMBER 71 11 1 179 522

VW428A 49.99
Volkswagen 428a FACTORY TOOL MADE IN GERMANY

In Stock Now!
Call if you need more info on this tool.
read more:

Power Lifter Pickup Tool 21.00
Pick up Tool 2 feet long (24 inch) with 3 lbs. lift capacity.
read more:

Multi Tool & LED Light 24.99
Multi Tool & LED Light
Multi Tool with LED LightFeatures and Benefits:5 Multi tools fold up into handleNylon pouch includedDetachable LED light with magnifier lens.
read more:

T Handle Spark Plug Tool 6.99
5/8 T Handle Spark Plug Tool. Insulated T handle.
Neoprene insert to grip and protect plugs. Swivel action socket for working in confined areas.
Drop forged steel construction, and chrome plated to resist corrosion.
Tool is 9 1/4 inch overall in length.
read more:

Audi Headbolt Tool 17.50

This is the tool you are looking for!
Plus it is on sale!
Number T10070 Headbolt Tool 1/2 Drive
Used to remove and install cylinder headbolts.
Volkswagen Audi V6 and 4 Cylinder 5 valve engines. Long pattern for deep located screws. Drive size is 1/2"Dont be stuck using the wrong tool for this application. T10070 is the correct current VW Audi number for this socketThe old tool number was 3452 and is now discontinued..Many Audi Headbolts have switched to the new pattern.This will fit into the new special screw profile.The German Tool Books call this a Polydrive.This is NOT a Torx socket although it is a 6 point tool.The points are more flat (squared off) than a torx.and it is NOT a XZN (tri square) Socket.

Hazet Tools 00

2725 Lockring Pliers special steel,
for application of stop springs on shift linkage,
e.g. for mounting and dismounting shift and automatic transmissions
on MERCEDES BENZ passenger cars, MB No. 210 589 00 37 00.

3 Piece Oil Service Set 29.50

3 Piece Oil Service Set includes sizes 36mm, 32mm and 27mm 6 point sockets. (36 mm for M52, M60, M62, M70, M73 engines) Special 36mm Oil Filter Wrench Removes and installs filters on BMW Mini Cooper. The low profile socket fits 36mm fuel and oil filters. The low profile socket works in confined spaces. 3/8 in. drive Not for use with an impact wrench. BMW Mini Cooper, BMW M52 6 cylinder, BMW M60 8 cylinder, BMW M70 12 cylinder.Mercedes Benz diesel engines: OM604, OM605, OM606 (1995 W124 E300 diesel, 96 97 W210 E300 diesel, 1998 E300 turbodiesel).Same as Mercedes tool number: 606 589 01 09 00VW Volkswagen VR6 Also for Ford Truck 6.0L 03 04
Plus you get the 32mm and the 27mm.
27 mm for R&R of oil filter cartridge element.App.: M163 (Class A), C230 (Compressor)
32 mm for R&R of Oil filter cartridge element.Applicable: Opel Astra, Corsa, VW Passat, Audi.

14mm Brake Tool 34.99

14mm Hex Bit Brake Tool Ford Features:This unique tool has been developed to aid in the removal and installation of front disc brake calipers found on most 1984 and later Ford 6000, 7000 and 8000 CF series trucks. The use of this tool allows for quick and easy removal of the caliper without disassembling the front axle and steering arm assembly.Made from heat treated steel this tool comes in a black finish.

You Searched for

benz tool

Trade Links With ZDMAK