Socket Set Number XZN1008PC
3/8 Drive Eight Piece Set -sizes =4mm, 5, 6, 8, 10, 12, 14 & 16mm
These are new! 12 Point XZN Short pattern "Stubby" Sockets
Sturdy and compact one solid piece design.
Satin Chrome with black impact tips. New S2 Alloy Steel.
$34.99
Metric Hex
Stubbies 1/4 Drive
Check it out.
Stubby Hex Metric Sockets in small "Popular" sizes.
Available Now at a fair price.
Plus these are the Sturdy One Piece Design.
1/4 Drive 9 Piece Set.
Hex (Allen) Sockets great for working on German Cars.
Sizes included:
2mm, 2.5mm, 3, 4, 5, 6, 7, 8, 10mm.
S2 Alloy steel - THE STRONGEST DRIVERS AVAILABLE.
Drivers heat treated to 56 to 62 RC.
Satin Chrome plating. Comes in the plastic case.
Number ZD-400HEXSET
$32.00
Hose Clamp Pliers
ITEM ZD-RB003
Lifetime Warranty
Features & Benefits: Double line, allows for extra reach,
removal
and locking of clamps into open position, allows for removal of
plastic
and/or metal self-tightening hose clamps
with diameters of
11/16" - 2-1/2" (18mm-54mm),
precision clamp on end of
flexible cable allows for extended reach
where other models cannot
reach.
Pliers can be locked, freeing
up your hands and making your job easy.
$18.99
ZD-7860AS
DISC BRAKE CALIPER
TOOL 11PC
.
SET
U.S./EURO/ASIAN/4WD VEHICLES
Rotates piston back into caliper for fitment of new brake shoes
Works on many models from these manufacturers:
Mercedes, BMW, VW, GM, Audi, Ford, Honda, Subaru,
Mazda, Nissan, Mitsubishi, Toyota, Rover 4wd
Kit consists of 11 separate pieces
ZD-7860AS
$4
9.99
ZDMD-10234
BRAKE
PISTON SPREADER
This press tool
pushes Brake Caliper
Piston back into the Caliper housing.
ZDMD-10234
$49.99
Oxygen Sensor 22mm Deep
Socket
For Domestic & Imports
Number L22SPLT
Removes and Installs Oxygen Sensors on
Many Domestic and Imports.
Special 22mm Socket with slotted cutout for clearance of wire harness.
Provides proper depth to fit over the sensor.
Use with 1/2 square drive or wrench end.
$13.99
ZDMD-LED1MX
Magnetic Flex Shaft
LED Light
Magnetic Flex Shaft LED Light 1 LED flexible shaft Inspection light
with Neodymnium magnet in tip.
$29.00
ZDMD-HSTAND Bench Head Stand Set
Aluminum & Steel Heads This Head Stand set has been designed for use
on most cylinder heads.
In operation, it holds the head off the bench for valve work,
head cleaning and assembly.
Its holding rods have a log 5 inch taper
which allows them to go further
into the stud hole
for more contact in the hole and a firmer grip on the head.
These holding rods are also heat treated to remain smooth for use on
aluminum heads.
ZDMD-HSTAND
$25.00
22mm Special Tube
Socket Number 4491A
1.)
Used for securing the
Strut tower retaining
nut of most European models
(crucial when
adjusting tension of front shocks).
The 2/3
open side walls of this socket allows for easy
access of an adjusting wrench.
2.) R&R of Oxygen Sensor.
3.) Also- Used for R&R of Mercedes Deisel
injectors.
$29.00
36mm Extra Long Thin
Wrench
Number 1036T
Please read:
This
wrench has a thickness of 8mm.
We have other 36mm thin wrenches on this website,
but at 20 inches long and good quality, this is the wrench we
recommend.
$29.99
32mm Extra Long Thin
Wrench
Number 1032T
Please read:
This
wrench has a thickness of 8mm.
We have other 32mm thin wrenches on this website,
but at 20 inches long and good quality, this is the wrench we
recommend.
$29.99
OXYGEN SENSOR Socket 4491b
This is a Special 22mm
Crowsfoot Socket with 3/8 Drive
Used for the removal and replacement of Oxygen Sensor that are situated within a confined area.
No need to snip the wires leading to the unit when all you want to do is check the sensor.
Applicable: Most European Models.
$19.00
OXYGEN SENSOR Socket 4491c 22mm Socket 3/8 Dr. used for the removal and replacement of stubborn
Oxygen Sensors situated within a confined area.
Applicable: Most European Models.
$16.00
Thin Wrench Number 1032X36T
Thin Wrench 32 X36mm with an 8mm overall thickness
and an
overall length of 12
inches
for proper leverage.
Many applications for this handy thin wrench
$24.00
Pressure Adaptor 1018
Pressure Adaptor needed for pressuring the
master cylinder or clutch slave cylinder
reservoirs.
Used in conjunction with a
pressure bleeder.
Comes with a 1/4-18 NPT
threaded opening. Applicable:Most European
models.
$22.00
Super Duty 8mm Allen Item P243
Extra Long 3/8 Drive Socket
This 8mm
Extra Long Allen Socket is a solid one piece construction.
Overall length is 7.75 inches.
Used for R & R of some Benz Cylinder Headbolts,
and some BMW
C.V Joint Bolts,
and Porsche Heat Exchange- Exhaust sysetms 911
-930 Porsche
Top Dead Center Indicator 9710
9710 Used for T.D.C. on any
Gas engine.
Simply unscrew a spark plug and twist the
rubber hose
part of this tool into the spark
plug hole.
As you rotate the engine with a
turning bar,
the piston forces air through the
whistle part of this tool.
Once the whistling
stops the engine is at T.D.C.
$13.00
Drain Plug
Socket ST-0229
This is a Special Tamperproof * Transmission Drain Plug Socket.
Triple Square ( 12 Point - XZN ) Same as Volkswagen Tool 3357.
For Porsche Boxster and Audi A4 - A6 and Passat.
This is an excellent "One-Piece design.
You will not find a better price on this tool anywhere.
$25.00
Heavy Duty Allen 17mm Stubby Socket
1017
Heavy duty Allen socket designed specially for
R&R of gearbox drain plugs.
Also
for a variety of other applications.
1/2 Drive Applicable: Most European
Vehicles
$21.00
30mm Thin Wall Deep Socket
ITEM BMW3025
Deep Socket 30mm
Specially designed 30mm thin walled 12 point, deep socket.
$39.00
P242 Spanner Wrench Set
Set of 4 Open End
Excellent for German Car Mechanics.
These wrenches will come in handy for many
applications.
This 4-pack set includes (1) each of
the following wrench sizes:
27mm, 30mm, 32mm,
36mm.
Puller VW266H
Separator used for disassembly
of Pitman arm type tie rod ends
without tearing the boots.
Opening
size is 18mm. Most VW - Audi -
Late Porsche models.
$36.00
Tie Rod Tool VW 1014
Separator vw 1014 used for disassembly of pitman arm type tie rod ends
without tearing the ball joint boots.
Opening size is 25mm.
Most VW - Audi &
Late Porsche models.
$42.00
Drift Pin - 4mm
Number 1045
Drift needed for removing disc brake
pads.
This Drift is designed to press the
brake pad retaining pins back
w/o damage to
pin or caliper. Applicable: Porsche models.
Also, for a variety of other applications.
(Overall length of tool is 7 inches.)
$16.50
Cylinder Head Alignment Kit VA6000
Same as Volkswagen Tool 3070
Set comes with (2) pairs of
guide pins, 11X1.75mm and 12X1.75mm.
VW model - Scirocco,
Rabbit, Dasher, Fox. Audi model - 4000, 5000
$19.00
TOOL VW681 Seal
Remover-Puller
For grease seals and oil
seals.
The two tips will fit many applications.
$9.99
3 Piece
Socket Holder Set
Socket Holders -Used for holding sockets sizes: 1/4", 3/8 and 1/2"
3
piece Socket Holder Set
ITEM ZD3HOLDER
$10.99
Long Pattern Thin Wrenches
Set of Two (2) Brand New "Long Pattern Thin Wrenches"
One of each size: 36MM and 32mm
Many applications for these two tools, especially for European cars.
Overall length of 15 inches.
Thickness of each
wrench is 1/4" (6.35mm)
Tools will come with a
nice blue rubber handle grip on each.
Some applications include:
Mercedes and BMW Needed for R&R of fan clutch hub nut.
Porsche 32mm used for R&R of tie
rods Model 911 Turbo, 89 -76
36mm Needed for proper adjustment of
rear ride height 911 , 89-77
Set 2
ITEM ZDMD -3632THWR2
$29.99
Long
Pattern 36mm Thin Wrench
ITEM ZD36THWR1
Long Pattern Thin Wrench 36mm Open End Wrench
You will
not find a better price on this brand new tool anywhere!
Many applications for this tool,
especially for European cars
Overall length of 15 inches.
Thickness of wrench is 1/4" (6.35mm)
Tool comes with a rubber handle
grip.
$17.00
Long
Pattern 32mm Thin Wrench
ITEM ZD32THWR1
Long Pattern Thin Wrench
32mm Open End Wrench
Many applications for this tool,
especially for European cars
Overall length of 15 inches.
Thickness of wrench is 1/4" (6.35mm)
Tool comes with a rubber handle
grip.
$16.00
ZDMD-3PC78-14 Flexible Nut Drivers
THREE (3) TOOLS
2 Piece
"Flexible" Hex-Nut Driver Set.
Sizes are 7mm and 8mm.
The flexible rubber coated shaft
Plus a Bonus 1/4" FLEX-DRIVER
Flex-Nut Drivers
below
work well on hose clamps,
hex-headed screws and nut screws.
ZDMD-3PC78-14
$24.99
Flexible Nut
Driver 7mm
ITEM ZD-FLX7M
Size on this nut
driver is 7mm.
This is a great deal for a nut driver. Rubber coated flexible shaft
Flex-Nut Drivers
work well on hose clamps, hex-headed screws and nut screws.
$11.00
Flexible Nut
Driver 8mm
ITEM ZD-FLX8M
Flexible" Hex-Nut Driver
Sizes on this nut
driver is 8mm
Rubber coated flexible shaft
Flex-Nut Drivers
work well on hose clamps, hex-headed screws and nut screws.
$11.00
1/4 Inch
Flexible Driver
ITEM ZD-FLX14DRZ
Sizes on this Driver is
1/4 inch
Flex-Drivers
work well on many applications.
This is a very popular tool. Rubber coated flexible shaft
$11.00
36mm Extra Long Thin
Wrench
Number 1036T
Please read:
This
wrench has a thickness of 8mm.
We have other 36mm thin wrenches on this website,
but at 20 inches long and good quality, this is the wrench we
recommend.
$29.99
32mm Extra Long Thin
Wrench
Number 1032T
Please read:
This
wrench has a thickness of 8mm.
We have other 32mm thin wrenches on this website,
but at 20 inches long and good quality, this is the wrench we
recommend.
$29.99
Valve Stem Seal Pliers
Item 10-218A
Tool is used for the proper extraction of stem seals.
The inside
grooves on the tips of this Plier allows the firm grip
of both O.E. and aftermarket seals
Applicable: Most Overhead Cam engines.
$16.00
Valve Shim Plier
10-208
Used for proper R&R of valve adjusting shims.
Applicable: Overhead Cam engines with adjusting shims.
$17.99
Valve Shim Plier
Plus Extra Replacement Tips*
Used for proper R&R of valve adjusting shims.
Applicable: Overhead Cam engines with adjusting shims.
$23.00
ITEM ZDVW2PL
Valve Stem Seal Pliers and Shim Plier Set
Valve Stem Seal Plier (top) is used for the proper extraction of stem seals.
The inside
grooves on the tips of this Plier allows the firm grip
of both O.E. and aftermarket seals
Applicable: Most Overhead Cam engines.
Valve Shim Plier -Used for proper R&R of valve adjusting shims.
Applicable: Overhead Cam engines with adjusting shims.
Set 2
$37.00
Valve Stem Seal Pliers
"Extra Long "
ITEM 10-218XLG
You will not
see these every day, or find a
better price on this tool anywhere!
These are longer than the standard Valve Pliers.
Tool is used for the proper extraction of hard to get at stem seals.
The inside
grooves on the tips of this Plier allows the firm grip of both
O.E. and aftermarket seals
Applicable: Overhead Cam engines.
$19.00
Stahlwille
Tool 13X14 Deep Offset
Stahlwille Style #20 -13 X 14mm Deep Offset 12 Point Spanner.
This Exact item is no longer available from Germany.
PORSCHE - VW VALVE ADJUSTMENT
TYPE 1, 2, 3 and
4 VOLKSWAGEN
ITEM STNA13X14WR
$7.99
ITEM ZDMD-2OWFLEX TWO
oil FILTER
WRENCHes
"Swivel Grip"
Flexible Handle Oil Filter Wrenches
The adjustable handle "Flips" To clear obstructions
making it easier to turn in confined spaces.
Vinyl coated Handles
Size Ranges : 75 to 95mm and 65 to 83mm ZDMD-2OWFLEX
$9.99
ZDMD-3PCOFWR lot
3 oil FILTER WRENCHes
The Two Tools above are "Swivel
Grip" Flexible Handle Wrenches
The adjustable handle "Flips" To clear obstructions
making it easier to turn in confined spaces.
Vinyl coated Handles
Size Ranges for above: 75 to 95mm and 65 to 83mm
PLUS
A
Brand New "TWO WAY" Oil Filter
Wrench
1/2" Drive SIZE RANGE: 2 -1/2" to 4" (63-102mm)
THIS SET INCLUDES
ALL THREE TOOLS ABOVE
ZDMD-3PCOFWR
$19.99
ZDMD-9BHEXSET
Long Pattern
9 Piece Ball Type Hex Key Set
1.5mm thru 10mm
Number ZDMD-9BHEXSET
$12.99
Number ZDMD-3BRKST
Lot
3 Brake Tools
BRAKE
PISTON SPREADER
This Press Tool
pushes Brake Caliper
Piston back into the Caliper housing.
PLUS BRAKE SPRING
PLIERS
TOOL IS USED FOR EASY REMOVAL AND
INSTALLATION
OF SHOE RETURN SPRINGS ON MOST DRUM BRAKES.
THE SOCKET -END REMOVES SPRING FROM ANCHOR STUD,
AND THE NOTCHED END INSTALLS THE SPRING ON THE ANCHOR.
Overall length of this tool is 13 inches
PLUS
BRAKE RETURN SPRING TOOL
Designed for import car drum brake return springs.
The tool removes and installs return springs.
Also works on domestic brakes that don't use an anchor pin.
Engage brake spring tool head. Turn handle to lock on spring.
Expand spring to install or remove.
ZDMD-3BRKST
$58.00
Stahlwille 12717 Pin Wrench Tool has been designed for easy adjustment of
Camshaft spur belts (toothed belt) on idler Pulleys with Pin holes.
This wrench with its protruding pins, grabs the center of the idler pulley
and rotates around the off-center retaining bolt
allowing for easy belt tension
adjustment.
Tension Pulleys on 4 cylinder
Golf, Jetta, Passat and Corrado. Audi 80
$12.00
