Ford Mustang Compressor 450.00Mustang coil spring compressor, designed specically for R&R of front coil springs.
Conventional coil springs compressors have a tough time assessing the coil springs due to the confined space of the chassis,or, too flimsy and unsafe to use.
Simply remove the shock absorber and introduce the compressor shaft into the coil spring either through the A arm or chasis. Incorporates a 3 way safety lock mechanism.
APPLICABLE: All Ford Mustang models 1964 1/2 and newer.
read more:
MacPherson Strut Coil Spring Compressor 289.50  | MacPherson Strut Coil Spring Compressor.
Includes 3 pair Jaws. For compressing several types of MacPherson type front and rear springs.
For European and Domestic vehicles.
Set includes 3 sets of shoes (jaws) Sizes 125 215mm 88 160mm 65 125mm and carrying case. |
read more:
MacPherson Strut Coil Spring Compressor 0.00Compressor and removal tool for 'Mac Pherson' Springs.
Due to its size, it can sometimes be used on the car,
without having to remove the shock absorber.
Maximum power: 12,300 N.
Supplied with two pairs of forks
(80 and 165 mm in diameter
155 and 195 mm in diameter).
Because of considerable spring loads, great care is recommended.
Recommended for use with electric and pneumatic (nonimpulse) drivers.
read more:
MacPherson Coil Spring Compressor 289.50 | | MacPherson Strut Coil Spring Compressor.
Includes 3 pair Jaws. For compressing several types of MacPherson type front and rear springs.
For European and Domestic vehicles.
Set includes 3 sets of shoes (jaws) Sizes 125 215mm 88 160mm 65 125mm and carrying case. |
read more:
Spring Compressor Kit 269.00  | Special Low Price
Mercedes Coil Spring Compressor Kit
For front and rear coil springs.
Applicable: Mercedes chassis W107, W116, W123, W124, W126, W129, W140, W201, W202.
Comes with a convenient carrying case.
Ref: 924 589 0231 00
Call if you have any questions about this tool or any other tool.
|
read more:
Mercedes Coil Spring Compressor 00Telescopic compressor for shock absorber springs
Suitable for removing and positioning helicoidal springs
within multi link, independent arm suspension systems.
Supplied with two pairs of interchangeable caps
provided with a three hook safety system.
read more:
MacPherson Strut Coil Spring Tool 54.50  | The Strutter2, MacPherson Strut Coil Spring Tool With acme threads and economically priced. virtually all Quickly and easily work on the MacPherson Struts found on virtually all modern domestic and imported vehicles. Features a one piece cold headed bolt made of chromium molybdenum alloy steel. The nuts are Grade 5. Use with impact wrench or hand tool ON or OFF the car.car. Contains complete instructions and safety kit. Not for use on any unusually large MacPherson Strut springs which have a coil outside diameter of over 6" or a wire diameter larger than 5/8". Do not use on General Motors "A", "C", "J" or "X" Body cars.
Acme threads for easy use and additional strength.
Clamshell packaging with a built in handle can be used to store the tool. |
read more:
Spreader Socket 26.99Spreader Socket Number 3424This tool is used on all A4 platform VWs including Golf,Jetta, and Gti, 337, 20a.e. GTI model year 1999 to presentTool is used any time the strut needs to be separated from the wheel bearing housingMost common would be changing/replacing struts, coil spring, or the entire strut assemblyYou would also use this tool when servicing the wheel bearingWhy do you need to use it?? you can not easily remove the strut from the wheel bearing housing without itThe wheel bearing housing clamps down very tightly on the strut assembly....even with the bolt removed the housing is still firmly clamped to the strut...this tool allows you to spread the housing where it is clamped on so that the strut can be removed.Basically this tool is a must have any time the strut or wheel bearing housingneeds to be removed from the above models.
read more:
Valve Spring Compressor * Standard 0.00Item1450DescriptionValve spring compressor with straight jaws, nickel platedSpecificationsThe pantograph levers ensure consistent coaxial contact with the valve.
read more:
Valve Spring Compressor 0.00Valve spring compressor
. Allows spring compression by releasing the valve from the valve collets without removing the head.
. The tool is fixed to either the camshaft or the head walls by two hooks supplied with it
read more:
Spreader Socket 18.99  | Spreader Socket Number 3424This tool is used on all A4 platform VWs including Golf,Jetta, and Gti, 337, 20a.e. GTI model year 1999 to presentTool is used any time the strut needs to be separated from the wheel bearing housingMost common would be changing/replacing struts, coil spring, or the entire strut assemblyYou would also use this tool when servicing the wheel bearingWhy do you need to use it?? you can not easily remove the strut from the wheel bearing housing without itThe wheel bearing housing clamps down very tightly on the strut assembly....even with the bolt removed the housing is still firmly clamped to the strut...this tool allows you to spread the housing where it is clamped on so that the strut can be removed.Basically this tool is a must have any time the strut or wheel bearing housingneeds to be removed from the above models. |
read more:
Valve Spring Compressor 00Valve spring compressor
Allows operations on valves, with or without heads.
Because many adjustments are possible, it can be fixed to multivalve heads,
up to 12 cylinders (line or V shaped arrangements).
read more:
Pneumatic Strut Compressor 00Item 1550/1
.Pneumatic power used to save time and trouble.
Three different interchangeable Forks supplied to accomodate a variety of Spring diameters.
Hands Free Control Foot Pedal Activation.
read more:
Set 3424 Plus 3186 79.99  | Set 2 TOOLS
Spreader Socket Number 3424This tool is used on all A4 platform VWs including Golf,Jetta, and Gti, 337, 20a.e. GTI model year 1999 to presentTool is used any time the strut needs to be separated from the wheel bearing housingMost common would be changing/replacing struts, coil spring, or the entire strut assemblyYou would also use this tool when servicing the wheel bearingWhy do you need to use it?? you can not easily remove the strut from the wheel bearing housing without itThe wheel bearing housing clamps down very tightly on the strut assembly....even with the bolt removed the housing is still firmly clamped to the strut...this tool allows you to spread the housing where it is clamped on so that the strut can be removed.Basically this tool is a must have any time the strut or wheel bearing housingneeds to be removed from the above models.
Plus 21mm Open Sidewall Socket number 3186
ANOTHER SUPERSET FROM ZDMAK! |
read more:
Set 3424 Plus 3078 79.99  | Set 2 TOOLS
Spreader Socket Number 3424This tool is used on all A4 platform VWs including Golf,Jetta, and Gti, 337, 20a.e. GTI model year 1999 to presentTool is used any time the strut needs to be separated from the wheel bearing housingMost common would be changing/replacing struts, coil spring, or the entire strut assemblyYou would also use this tool when servicing the wheel bearingWhy do you need to use it?? you can not easily remove the strut from the wheel bearing housing without itThe wheel bearing housing clamps down very tightly on the strut assembly....even with the bolt removed the housing is still firmly clamped to the strut...this tool allows you to spread the housing where it is clamped on so that the strut can be removed.Basically this tool is a must have any time the strut or wheel bearing housingneeds to be removed from the above models.
Plus 22mm Open Sidewall Socket number 3078
ANOTHER SUPERSET FROM ZDMAK! |
read more:
Set 3424 Plus 3077 79.99  | Set 2 TOOLS
Spreader Socket Number 3424This tool is used on all A4 platform VWs including Golf,Jetta, and Gti, 337, 20a.e. GTI model year 1999 to presentTool is used any time the strut needs to be separated from the wheel bearing housingMost common would be changing/replacing struts, coil spring, or the entire strut assemblyYou would also use this tool when servicing the wheel bearingWhy do you need to use it?? you can not easily remove the strut from the wheel bearing housing without itThe wheel bearing housing clamps down very tightly on the strut assembly....even with the bolt removed the housing is still firmly clamped to the strut...this tool allows you to spread the housing where it is clamped on so that the strut can be removed.Basically this tool is a must have any time the strut or wheel bearing housingneeds to be removed from the above models.
Plus 19mm Open Sidewall Socket number 3077
ANOTHER SUPERSET FROM ZDMAK! |
read more:
Mercedes Valve Spring Compressor 149.50  | M0068 Valve Spring Compressor Kit M0068For 6 and 8 cylinder engines.Same as Benz Number 123 589 0361 00Spring Compressor Kit used for R&R of valve spring or rocker arm.Job can be done with the cylinder headon or off the car.Applicable: M 114, 115, 116, 117, 123, 130, 180 |
read more:
Rolls Royce Spring Compressor 479.99Spring Compressor used compress front axle springs in the car on Rolls Royce vehicles.
read more:
Spring Compressor (Exhaust) 59.99  | Valve Spring Compressor (Exhaust)Designed for On The Car R&R of Exhaust valve springswithout having to remove the motor or cylinder heads.Applicable: Porsche model 911 '65 '89. |
read more:
Universal Valve Spring Compressor 59.99This set is used to remove and install the valve spring
with the cylinder head still on the engine and in the car,
or with the cylinder head removed.
The multi point adjustable base of this tool bolts securely to the headwhile the adjustable lever mechanism pivots from the bar thus compressing the spring.Quick removal and installation of the spring retaining keepers is then easily accomplishedthrough the large openings on both sides of the compression tube.This set comes complete with an easy grip handle and a storage tray.
read more:
Spring Compressor (Intake) 59.99  | Valve Spring Compressor (Intake) Porsche Number P7iDesigned for On The Car R&R of Intake valve springsw/o having to remove the motor or cylinder heads. Applicable: Porsche model 911 1965 '89 |
read more:
Valve Spring Compressor 59.99  | Valve Spring Compressor
Featuring two way adjustment with quick and easy compress and release.
. Jaw opening: 2 3&8260;4&8243; to 7 3&8260;4&8243;. 9 3&8260;4&8243; Depth |
read more:
Saab Rigid Valve Spring Compressor 58.50  | This Unique "On the Car" Rigid Valve Spring Compressor was designed to do away with conventional Lever based or C Clamp type mechanisms. The side by side threaded compressors inherent design allows the technician to have hands free to work with, and safely and easily maintain the Valve Spring to a fully compressed position, and to repair Valve Stem Seals without removing the Heads. This unit will cut repair time considerably.Will work on Saab 900, 9000, 9 3, 9 5 Double Overhead Cam Engines From early to later models. |
read more:
Trans Clutch Spring Compressor 59.50  | Transmission Clutch Spring Compressor. For removing and installing the trans rear clutch piston snap ring adjustable for many domestic cars and light trucks. Applies pressure to the retaining washer in the clutch drum to compress clutch piston return springs in order to remove or install snap ring during repairs or overhaul. |
read more:
Valve Spring Tool and Bridge 142.50  | Valve Spring Tools Set including:VA6010Valve Spring Compressor BarSame as Volkswagen Tool Number VW 541/1Used for R&R of valve spring or rocker armWith this tool the job can be done with the cylinder head on or off the car.Used in conjunction with tool BridgeApplicable: 924 / 944 VW AUDI 4 5 Cyl. VA6022Support Bridge Same as VW Tool 2036 Used for R&R of valve spring or rocker armUsed in conjunction with tool VW541/1Applicable: Model 924. VW / AUDI 4 5 Cyl. |
read more:
Valve Spring Tool & Bridge 142.50 | | Valve Tools (2)
Set including:Valve Spring Compressor Bar
Same as Volkswagen Tool Number VW 541/1
Used for R&R of valve spring or rocker armWith this tool the job can be done with the cylinder head on or off the car.Used in conjunction with tool BridgeApplicable: 924 / 944 VW AUDI 4 5 Cyl. VA6022Support Bridge Same as VW Tool 2036 Used for R&R of valve spring or rocker armUsed in conjunction with tool VW541/1Applicable: Model 924. VW / AUDI 4 5 Cyl. |
read more:
Universal Valve Spring Compressor 68.50  | This set is used to remove and install the valve spring
with the cylinder head still on the engine and in the car,
or with the cylinder head removed.
The multi point adjustable base of this tool bolts securely to the headwhile the adjustable lever mechanism pivots from the bar thus compressing the spring.Quick removal and installation of the spring retaining keepers is then easily accomplishedthrough the large openings on both sides of the compression tube.This set comes complete with an easy grip handle and a storage tray. |
read more:
Valve Spring Tool 68.00  | Valve Spring Compressor Bar VA6010 Used for R&R of valve spring or rocker arm VW AUDI 4 / 5 Cylinder.With this tool the job can be done with the cylinder head on or off the car.Used in conjunction with tool VA6022 below Applicable: 924 / 944Reference VW Tool Number VW541/1 |
read more:
STRUT ALIGNMENT LEVEL 29.99STRUT ALIGNMENT LEVEL
Use this level to restore a vehicles camber setting after strut repair or installation. Allows technician or customer to safely drive the vehicle before a more precise wheel alignment can be performed. Super strong magnet mounts on brake rotor, spindle or steering knuckle. Easy to use: (1)Place on vehicle before repair and zero the level. (2)Tighten the wing nut. (3)After the repair, push or pull on the strut until the level returns to the zero position.
read more:
10 pc Mini Pliers Set 24.99Set includes the following coil spring pliers:. Diagonal Cutter pliers. 45 Bent Nose Pliers. 45 Long Needle Nose Pliers. Flat Nose PliersKit includes the following leaf spring pliers:. Diagonal Cutter Pliers. End Cutting Pliers. Straight Nose Pliers with Cutter. 45 Bent Nose Pliers. Round Nose Pliers. Long Needle Nose Pliers. All tools in this kit are 4.5 long.
read more:
Puller Strut Tool 265.00  | Strut Remover For removing and installing or replacing left or right traction strut. For pressing control arm off steering knuckle, when replacing left or right control arm. Appl.: E38, E39, E52(Z8), E53(X5) |
read more:
SPARK PLUG REPAIR KIT 119.99LONG REACH SAV A THREAD SPARK PLUG REPAIR KITHeli Coil inserts can be used in any material: cast iron, steel, copper,brass, bronze, aluminum, magnesium, plastics and wood. After installation, theynever shift, wear or back out. Stripping, fatigue, corrosion, crossthreading andseizing are eliminated. Heli Coil thread repairs provide freedom from wearafter repeated assembly and disassembly.
read more:
Piston Ring Compressor 00Piston Ring Compressor
For Mounting and removing Piston rings
Must specify size: For use on rings
50 to 100 , 80 to 120 , 110 to 160. Call for Availability.
read more:
Spring Loaded Gauge 46.50  | P228 Spring Loaded Gauge Spring Loaded Gauge Displays valve spring height using pre calibrated indicatorsstamped onto the outside surface of this tool. Crucial for accurate valve spring adjustment.Applicable: Porsche 911.Same as Porsche P10C |
read more:
21mm Suspension Strut Socket 59.95  | Special 21mm Tube SocketUsed for securing the Strut tower retaining nut of select European models (crucial when adjusting tension of front shocks). The 2/3 open side walls of this socket allows for easy access of an adjusting wrench. (normally 7mm Allen Hex Wrench)For removing and installing front strut unit on VW Audi 21mm nut.This tool is often used in conjunction with a pin wrench / allen wrench or both. |
read more:
19mm Suspension Strut Socket 59.95 | | Special 19mm Tube SocketUsed for securing the Strut tower retaining nut of select European models (crucial when adjusting tension of front shocks). The 2/3 open side walls of this socket allows for easy access of an adjusting wrench. (normally 7mm Allen Hex Wrench)For removing and installing front strut unit on VW Audi 19mm nut.This tool is often used in conjunction with a pin wrench / allen wrench or both. |
read more:
Brake Spring Plier 11.99  | Brake Spring Tool for removing and installing Shoe return springs on most drum brakes. The socket end removes the spring from the anchor stud, and the notched end installs the spring on the anchor. |
read more:
Ignition Coil Puller 35.95  | Ignition Coil Puller T10039 Original Factory Tool Made in Germany: USED FOR REMOVAL AND ASSEMBLY OF IGNITION COILS WITH FINAL OUTPUT STAGE. ENGINE CODES (AWA,ASN,BBK). |
read more:
Strut Extractor 155.00  | This tool is used specificallyfor removal of Traction strut from TIE rod lever.(SAME AS BMW TOOL 312140)Applicable: Chassis E31, E32, E34 |
read more:
21mm Strut Set Up 75.00  | 21mm Special Tube Socket Plus Pin Wrench VW524
Used for securing the Strut tower retaining nut of most European models
(crucial when adjusting tension of front shocks). The 2/3 open side walls of
this socket allows for easy access of an adjusting wrench.
(normally 7mm Allen Hex Wrench)
Also for R&R of Oxygen Sensor.
VW524 Pin Wrench Socket with 1/2" drive. This tool is used for R&R of
grooved ring retaining nut on strut tower of front shock absorber.
Also used for adjusting power steering gear on VW Jetta, Golf, GTI. |
read more:
Technical Measuring Tools 14.994 Piece Tool Set
Technical Measuring Tools
Includes ruler, spring divider, spring outside caliper, and spring inside caliper.
Carbon steel with hardened fulcrum, spring, and points.
All instruments are precision ground and polished with fine adjustments.
Length: Ruler 6 inch / divider 6 inch / outside caliper inch / inside caliper 6 inch
Calibration: Ruler graduated in 16ths and 64ths, millimeters, and 500 micron increments (reverse includes conversion tables).
read more:
Spring Clips 2.50P241 Spring Clips like vw 171Used for securing cam followers within crank case half during assembly. Applicable: Porsche model 356, 912, 914.Every VW air cooled engine.
read more:
3 Piece Strut Set 34.99  | On Sale! 22mm Tube Socket Plus Pin Wrench number VW524, Plus 7mm Allen Wrench
Tools used for securing the Strut tower retaining nut of most European models
(crucial when adjusting tension of front shocks). The 2/3 open side walls of
this socket allows for easy access of an adjusting wrench.
(normally 7mm Allen Hex Wrench)
Also for R&R of Oxygen Sensor.
VW524 Pin Wrench Socket with 1/2" drive. This tool is used for R&R of
grooved ring retaining nut on strut tower of front shock absorber.
Also used for adjusting power steering gear on VW Jetta, Golf, GTI.
3 total pieces in this set: 2 Sockets and 7mm Allen Wrench.
The Allen wrench is 7.5 inches long. |
read more:
21mm Strut Set (3) 79.00  | 21mm Tube Socket Plus Pin Wrench number VW524, Plus 7mm Allen Wrench
Tools used for securing the Strut tower retaining nut of most European models
(crucial when adjusting tension of front shocks). The 2/3 open side walls of
this socket allows for easy access of an adjusting wrench.
(normally 7mm Allen Hex Wrench)
Also for R&R of Oxygen Sensor.
VW524 Pin Wrench Socket with 1/2" drive. This tool is used for R&R of
grooved ring retaining nut on strut tower of front shock absorber.
Also used for adjusting power steering gear on VW Jetta, Golf, GTI.
3 total pieces in this set: 2 Sockets and 7mm Allen Wrench.
The Allen wrench is 7.5 inches long. |
read more:
Valve Spring R&R Kit 00  | This set is used to remove and install the valve spring
with the cylinder head still on the engine and in the car,
or with the cylinder head removed.
The multi point adjustable base of this tool bolts securely to the headwhile the adjustable lever mechanism pivots from the bar thus compressing the spring.Quick removal and installation of the spring retaining keepers is then easily accomplishedthrough the large openings on both sides of the compression tube.This set comes complete with an easy grip handle and a storage tray. |
read more:
Brake Return Spring Tool 8.50  | Brake return Spring Tool
Used to hook the return spring on vehicles without anchor pins.Excellent for the professional or shadetree mechanic! |
read more:
22mm Strut O/2 Sensor Socket 18.99 | | On Sale 22mm Special Tube Socket 1.) Used for securing the Strut tower retaining nut of most European models (crucial when adjusting tension of front shocks). The 2/3 open side walls of this socket allows for easy access of an adjusting wrench. (normally 7mm Allen Hex Wrench) 2.) R&R of Oxygen Sensor.
Also for R&R of some Mercedes Diesel injectors ( OM604, 605 & 606). Details: For removing and installing front strut unit on VW Golf up to 1988, Jetta up to 87, Scirocco, Audi 80 and Golf 3 from 1993 newer, Passat from 88 and newer, Audi 100, 200 Coupe and Quatro. This tool is often used in conjunction with a 7mm hex wrench.Clickhere for a picture of the tools in action: |
read more:
Exhaust manifold spring Puller 00Item 1476B/2
Description
Exhaust manifold spring puller, long series, chrome plated.
Specifications:
Allows any steel springs connecting the exhaust manifolds
read more:
Punches for Spring pins 0.00Punches for spring pins, chrome plated.
read more:
2 Piece Socket Set 32.99  | 22mm Special Tube Socket 4491A Plus Pin Wrench VW524
Used for securing the Strut tower retaining nut of most European models
(crucial when adjusting tension of front shocks). The 2/3 open side walls of
this socket allows for easy access of an adjusting wrench.
(normally 7mm Allen Hex Wrench)
Also for R&R of Oxygen Sensor.
VW524 Pin Wrench Socket with 1/2" drive. This tool is used for R&R of
grooved ring retaining nut on strut tower of front shock absorber.
Also used for adjusting power steering gear on VW Jetta, Golf, GTI. |
read more:
You Searched for Strut Coil Spring Compressor
Click Strut Coil Spring Compressor to go to ZDMAK
SEARCH RSS NEWS USING THE WORDS BELOW
Strut Coil Spring Compressor |
strut tool |
Triple Square Socket |
transmission socket |
drain plug socket |
Brake Caliper Rewind |
Oil Service Tool |
Special Socket |
audi part tool |
vw part tool |
bmw part tool |
mercedes part tool |
porche tools |
volvo part tool |
toyota part tool |
Piston Reset Tool |
Brake Piston Tool |
porsche engine tools |
brake caliper tools |
oil filter socket |
volvo special tools |
oil filter wrench |
mercedes rss |
special tools rss |
porsche rss |
volvo rss |
mercedes tools |
porsche special tool |
vw special tool |
mercedes special tool |
audi special tool |
volkswagen special tool |
volvo tool |
bmw service reset |
bmw radio tool |
bmw cam tool |
hazet tools |
benz repair tool |
benz tool |
mercedes coil spring compressor |
bmw tool kits |
audi radio removal |
volvo cam tool |
vw exhaust tool |
bmw bushing tool |
volkswagen tools |
vw special tools |
mercedes radio removal tool |
toyota special tools |
special tools vw |
ball joint tool |
tie rod tool |
valve spring tool |
tdi tool |
brake tool |
vw radio tool |
hex sockets |
diesel timing tool |
volvo cam tool |
volvo camshaft tools |
volvo crankshaft tools |
mercedes timing tool |
xzn socket tool |
toyota special tool |
toyota repair tool |
tdi timing |
diesel tools |
vw 3391 |
vw 3243 |
audi 3391 |
audi 3243 |
volkswagen 3391 |
volkswagen 3243 |
spark plug tool |
head bolt tools |
head bolt tool |
headbolt tool |
radio removal tools |
waterpump holder |
thin wrench |
saab tools |
ferrari tool |
clutch tools |
belt tensioner tool |
transmission tool |
interior tool |
vanos tools |
piston ring compressor |
porsche repair tool |
fan clutch tool |
valve wrench |
hex sockets |
22mm tool |
32mm wrench |
17mm socket |
crowsfoot tool |
Belt Tension Guage |
Bit Set |
tool kit |
MacPherson Coil Spring Compressor |
Strut Coil Spring Compressor |
Bradenton Condos condos condos for sale villas villas for sale townhomes townhomes for sale townhouse
www.zdmak.com(c) Copyright 2005 ZDMAK.
