36mm Flare Wrench 42.50
Special 36mm Flare Wrench like vw 179.Oil Line 12 Point Wrench for servicing Oil Lineson most 1977 and Later Porsche 911 and 944 Turbo.This tool is also used for adjusting rear suspension heighton 77 and Newer Porsche 911and for camber on most late model Volkswagen Bug.
read more:

Ferrari Magnetic Wrench 29.99
17mm Magnetic Box V WrenchUsed for securing the top engine bolts from rotatingduring R&R of motor from transmission.Applicable: Porsche, VW and Ferrari modelsusing 17mm connecting bolts with a Hex Head
read more:

Valve Adjustment * Deep Offset Wrench 5.99
German MadeDeep Offset 12 Point Spanner.This Exact item is no longer available from Germany.PORSCHE VW VALVE ADJUSTMENTTYPE 1, 2, 3 and 4 VOLKSWAGEN
read more:

32mm Open End Thin Wrench 19.99

Long 32mm Thin Wrench
ON SALE

36mm Open End Thin Wrench 19.99

Long 36mm Thin Wrench
ON SALE

92mm Oil Wrench Socket 38.00

92mm Oil Filter Wrench
Will fit all Mann Knecht filters that require (92mm) and 15 inside flats.
Original Factory Tool Made in Germany. Size 92mm.
With outer (top) square drive size 12.5mm = 1/2 inch for ratchet or socket, or use the outside hex 27mm with a wrench.
15 point (inside flats or flutes).
Excellent high quality tool.
This tool will fit many (92mm) Volkswagen Audi Diesels.

Ajustable Pin Wrench 35.00

Universal Ajustable Face Pin Wrench.
Available sizes:2.5mm through 8mm. Call or email.

Carburetor Wrench 20.90

Carburetor Base Wrench 10mm x 12mm 12Pt box, thin head.

Female Torx Wrench Set 39.99

Female 5 Piece Set *
Torx Box Wrenches
Sizes included:
E6 X E8, E10 X E12, E14 X E16, E18 X E20, E22 X E24,
polished chrome.

Long Thin Wrench Set 2 24.99

"Long" Pattern Thin Wrenches
Set of Two (2)
One of each size: 36MM and 32mm
Brand New "Long Thin Wrenches"
Many applications for these two tools,
especially for European cars.
Overall length of 15 inches.
Thickness of each wrench is 1/4" (6.35mm)
Some applications include:Mercedes and BMW R&R of fan clutch hub nut.
Porsche 32mm used for R&R of tie rods Model 911 Turbo, 89 76
36mm Needed for proper adjustment of rear ride height 911 , 89 77 etc...

Mazda Wrench Set 49.50

2610 Used for the proper R&R of fan clutch nut. Kit includes (1) 36mm and (1) 58 mm spanner wrench 1/2 Drive.
Applicable: Ford 2.8L, 2.9L, 3.0L, 4.0L, 4.9L.
Wrenches are used in conjunction with a breaker bar or ratchet.

Metric Wrench 4 Piece Set 62.50

Spanner Wrench Set needed for R&RThis 4 pack set includes (1) each of the following wrench sizes:27mm, 30mm, 32mm, 36mm. Some pplications include: Porsche models 911, 930, 914 6, 944, 968. This is a German Car Specail * This set is great for the European Automotive Technician. Very Handy Tools!

Oil Filter Wrench 14.99

Oil Filter Socket
For removing the plastic housing on cartridge type oil filters.
86mm 16 Flute 3/8 Drive size.

Pin Wrench Socket 27.50

Used for R&R of rear axle bearing nut.Applicable: All Subaru 4WD models. Please note: Excluding Justy

Special Open Socket 22mm 25.00

On Sale *
22mm Special TubeSocket
1.) Used for securing the Strut tower retaining nut of most European models (crucial when adjusting tension of front shocks). The 2/3 open side walls of this socket allows for easy access of an adjusting wrench. (normally 7mm Allen Hex Wrench)
2.) R&R of Oxygen Sensor.
Also for R&R of some Mercedes Diesel injectors ( OM604, 605 & 606).
Details: For removing and installing front strut unit on VW Golf up to 1988, Jetta up to 87, Scirocco, Audi 80 and Golf 3 from 1993 newer, Passat from 88 and newer, Audi 100, 200 Coupe and Quatro.
This tool is often used in conjunction with a 7mm hex wrench.
Clickhere for a picture of the tools in action: 

Special Socket 00

This special socket is for most 1986 and later fuel injected Honda and Acuras.
It has been designed to easily remove and install the specialty shaped banjo bolt
used to attach the fuel line to the fuel filter. In operation, this socket fits completely over the head
of this odd shaped banjo bolt for 360 of contact.
This allows a firm grip on this "often very tight" banjo bolt and eliminates the possibility
of stripping the minimal flats provided on this O.E. fitting when using a 17mm open end wrench.

Split Socket 9.99

Deep Split Socket size 7/8
Removes and Installs Oxygen Sensors onMany Domestic and some Imports. Special Socket with slotted cutout for clearance of wire harness.Provides proper depth to fit over the sensor.Use with 1/2 square drive or wrench end.
Provides adequate depth to fit over sensor. Heat treated alloy steel.

Thin Wrench 32 X 36mm 29.99

Thin Wrench Number 1032X36T Thin Wrench 32 X36mm with an 8mm overall thicknessand an overall length of 12 inches for proper leverage.Many applications for this handy thin wrench

Toyota Locknut Tool 19.99

Toyota front wheel bearing design change requires a new procedure to remove the locknut: The free wheel hub assembly locknut is on the inside, so the hub must be removed to gain access. This wrench has a four pin design accommodates the four holes in each locknut, which prevents slippage under high torquing requirements. Works on 1995 and newer Tacoma, and 1996 and newer T100 and 4Runner.

13 x 14mm Drain Plug Wrench 72.98

13 x 14mm Drain Plug Wrench.
World Class Hazet Tools Made in Germany!

13mm WRENCH 39.75

13MM T WRENCH USED TO REMOVE AND INSTALL ALTERNATOR BRACKET/COOLING PUMP ON DIESEL ENGINES

17 x 17 Injection Wrench 59.50

Double Ended Flare Nut Box Wrench Size 17 x 17mmOverall Length 241mm (9.5 inch)For injection pipes on Volkswagen / Audi This tool will help you when you remove and install the fuel lines from the injection pump and the injectors themselves.For TDI: You will still need to torque the 17mm fittings down to spec, but this tool will make taking the fittings off a snap, as well as putting them back on.This is a Factory Tool Made in Germany

19mm Suspension Strut Socket 59.95

Special 19mm Tube SocketUsed for securing the Strut tower retaining nut of select European models (crucial when adjusting tension of front shocks). The 2/3 open side walls of this socket allows for easy access of an adjusting wrench. (normally 7mm Allen Hex Wrench)For removing and installing front strut unit on VW Audi 19mm nut.This tool is often used in conjunction with a pin wrench / allen wrench or both.

2 Piece Socket Set 32.99

22mm Special Tube Socket 4491A Plus Pin Wrench VW524
Used for securing the Strut tower retaining nut of most European models
(crucial when adjusting tension of front shocks). The 2/3 open side walls of
this socket allows for easy access of an adjusting wrench.
(normally 7mm Allen Hex Wrench)
Also for R&R of Oxygen Sensor.

VW524 Pin Wrench Socket with 1/2" drive. This tool is used for R&R of
grooved ring retaining nut on strut tower of front shock absorber.
Also used for adjusting power steering gear on VW Jetta, Golf, GTI.

21mm Suspension Strut Socket 59.95

Special 21mm Tube SocketUsed for securing the Strut tower retaining nut of select European models (crucial when adjusting tension of front shocks). The 2/3 open side walls of this socket allows for easy access of an adjusting wrench. (normally 7mm Allen Hex Wrench)For removing and installing front strut unit on VW Audi 21mm nut.This tool is often used in conjunction with a pin wrench / allen wrench or both.

22mm Socket plus 7mm Allen Wrench 26.99

2 Piece set
22mm Special Tube Socket 4491A plus 7mm Allen WrenchUsed for securing the Strut tower retaining nut of most European models(crucial when adjusting tension of front shocks). The 2/3 open side walls ofthis socket allows for easy access of an adjusting wrench. (normally 7mm Allen Hex Wrench) (This socket can also be used for R&R of Oxygen Sensor.)
Plus a 7mm Allen Wrench.The Allen wrench is 7mm and is 7.5 inches Long.

22mm Strut O/2 Sensor Socket 18.99

On Sale 22mm Special Tube Socket 1.) Used for securing the Strut tower retaining nut of most European models (crucial when adjusting tension of front shocks). The 2/3 open side walls of this socket allows for easy access of an adjusting wrench. (normally 7mm Allen Hex Wrench) 2.) R&R of Oxygen Sensor.
Also for R&R of some Mercedes Diesel injectors ( OM604, 605 & 606). Details: For removing and installing front strut unit on VW Golf up to 1988, Jetta up to 87, Scirocco, Audi 80 and Golf 3 from 1993 newer, Passat from 88 and newer, Audi 100, 200 Coupe and Quatro. This tool is often used in conjunction with a 7mm hex wrench.Clickhere for a picture of the tools in action:

3 Piece Oil Service Set 29.50

3 Piece Oil Service Set includes sizes 36mm, 32mm and 27mm 6 point sockets. (36 mm for M52, M60, M62, M70, M73 engines) Special 36mm Oil Filter Wrench Removes and installs filters on BMW Mini Cooper. The low profile socket fits 36mm fuel and oil filters. The low profile socket works in confined spaces. 3/8 in. drive Not for use with an impact wrench. BMW Mini Cooper, BMW M52 6 cylinder, BMW M60 8 cylinder, BMW M70 12 cylinder.Mercedes Benz diesel engines: OM604, OM605, OM606 (1995 W124 E300 diesel, 96 97 W210 E300 diesel, 1998 E300 turbodiesel).Same as Mercedes tool number: 606 589 01 09 00VW Volkswagen VR6 Also for Ford Truck 6.0L 03 04
Plus you get the 32mm and the 27mm.
27 mm for R&R of oil filter cartridge element.App.: M163 (Class A), C230 (Compressor)
32 mm for R&R of Oil filter cartridge element.Applicable: Opel Astra, Corsa, VW Passat, Audi.

3 Piece Strut Set 34.99

On Sale! 22mm Tube Socket Plus Pin Wrench number VW524, Plus 7mm Allen Wrench
Tools used for securing the Strut tower retaining nut of most European models
(crucial when adjusting tension of front shocks). The 2/3 open side walls of
this socket allows for easy access of an adjusting wrench.
(normally 7mm Allen Hex Wrench)
Also for R&R of Oxygen Sensor.

VW524 Pin Wrench Socket with 1/2" drive. This tool is used for R&R of
grooved ring retaining nut on strut tower of front shock absorber.
Also used for adjusting power steering gear on VW Jetta, Golf, GTI.

3 total pieces in this set: 2 Sockets and 7mm Allen Wrench.
The Allen wrench is 7.5 inches long.

3212 Ajustable Pin Wrench 35.00

Ajustable Pin Wrench Made in Germany
APPL: REMOVE INSTALL: 1) VISCOUS CLUTCH RADIATOR FAN
2)CENTRAL HYDRAULIC PUMP PULLEY

32mm Oil Filter Wrench 35.99

2169 32 Oil Filter Wrench, steel grey,square drive nominal size 10mm = 3/8, resp.
outside hexagon 27 mm14 point s 74.4 mm 6 point s 32 mmOPEL Astra, Corsa, VW Passat, AUDI

Buy seperately or buy in a set of 3 sizes 27, 32 and 36mm.

36mm Open End Thin Wrench 35.00

Extra Long 36mm Thin Wrench Number 1032TThis wrench has a thickness of 8mm.We have other 32mm thin wrenches on this website,but at 20 inches long and good quality, this is the wrench we recommend.

Best Quality Thin Wrench Set 68.50

Set of 2 Long Pattern Thin Wrenches
German Car Special *
One of each size: 36mm and 32mm
Overall length of 20 inches.
Thickness of each wrench is 8mm.Tools will come with a handle grip on each.
Many applications for these two tools.

BigMak Timing Kit 196.00

Master Kit
Set of 6 Tools
Including Dial Indicator

Set Includes:
3032 Injection Pump Tool Puller used for the proper extraction of injection pump drive gear. Applicable: Volvo and VW / Audi diesels Excluding TDI
PLUS: VA6015 Holder used for accurate adjustment of Bosch diesel injection pump.
Plus: 2065A Diesel Camshaft Locking Plate Tool
PLUS: 2064 Lock Pin for Diesel.
Plus the Pin Wrench (made in Germany) for easy adjustment of Camshaft spur belts (toothed belt) on idler Pulleys with Pin holes. This wrench with its protruding pins, grabs the center of the idler pulley and rotates around the off center retaining bolt allowing for easy belt tension adjustment. Tension Pulleys on 4 cylinder Golf, Jetta, Passat and Corrado. Audi 80.
Plus Dial Indicator

BRAKE TOOL 3343 0.00

ADJUSTMENT WRENCH USED WHEN ADJUSTING PARKING BRAKE. (REPAIR GROUP 46)

Crankshaft Wrench 103.50

Crankshaft Wrench 2079 Extension Wrench used for R & R of Front Crankshaft BoltApllicable: VW Audi with 5 Cylinder.80, 90 Quattro, 400, 5000 Quantum

DAMPER WRENCH 54.00

DAMPER WRENCH USED TO REMOVE THREADED CAP ON FRONT STRUT ASSY. AND SHOCK ABSORBER

Drive Belt Sprocket 42.50

NUMBER VA6018Drive Belt Sprocket WrenchLocking wrench used for R&R of drive belt sprocket on cam shaftand drive belt sprocket of intermediate shaft.Applicable: All VW Audi water cooled engines 1974 and Newer.

Duckwear Tool Roll 19.99

Bucket Boss Brand Duckwear Tool Roll Rolls up to store easily in small places Divided pockets organize and protect wrench sets, screwdrivers, tire gauges and more. Socket strip holds 3/8 inch or 1/4 inch sockets. Product Description From the Manufacturer:A clever self contained design with 23 pockets for wrenches, ratches and automotive hand tools. Equipped with socket clips that hold 3/8 inch and 1/4 inch sockets. Entire unit rolls up and secures with two barrel locks and a carry handle for transport. For the house, truck, boat and shop. Heavy duty and much better than a small bulky tool box. The open end of the tool slots face to the inside so wrenches and screwdrivers dont fall out when it is rolled up. The draw strings on each end are a heavy elastic with a quick tie so the whole thing stays together.

Factory Tool 3417 29.50

Item Number 3417 Original Oil service Wrench 74mm with14 Points (inside flats flutes).
Applications include: Audi, VW Golf, and new body Jetta, TDI (Diesel)
and the following gas vehicles; Passat, Golf and Jetta with 1.8 turbo and 2.0litre,
Rabbit, Dasher, Scirocco, and New Beetle.
Super High Quality Original Factory Tool Made in Germany!
Clickhere to see a detailed Application ChartMeasure filter diameter canister diameter or Check yourmanuals for details and size needed.

Front Crankshaft Pulley Set 187.50

Crank shaft pulley Set of 2 tools:VW 2084 & 2079Counter Holder 2084needed for R&R of front crank shaft pulley. ApplicaTIONS for 2084: VW/Audi models with 5 cylinder engines 80, 90, Quattro, 4000, 5000, Quantum.Used in conjunction with Extension Wrench 2079 BELOW. PLUS: 2079 Extension Wrench needed for R&R of front crank shaft bolt.ApplicablE: VW/Audi models with 5 cylinder engines80, 90, Quattro, 4000, 5000, Quantum.

Fuel Pump Wrench 79.50

FUEL PUMP WRENCH
WRENCH FOR INSTALLING/REMOVING FUEL PUMP ON AUDI 90 QUATTRO (B4).

FUEL SENDING UNIT WRENCH 0.00

FACTORY TOOL USED TO PROPERLY REMOVE AND INSTALL THE FUEL SENDING UNIT

Hazet Deep Offset 8 Pc Metric Set 169.50

This is an eight piece Deep Offset Wrench set Double Box wrenches with 12 points.Sizes: 6x7mm, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19 and 21x22mm.
Super High Quality Tools Made in Germany by Hazet!<

Hazet Oil Service Tool 29.50

Oil service Wrench 74mm with 14 Points (inside flats flutes).
Some applications include: Mercedes, Audi, VW Golf,
and new body Jetta, TDI (Diesel) and the following gas vehicles;
Passat, Golf and Jetta with 1.8 turbo and 2.0 litre, Rabbit, Dasher, Scirocco,and New Beetle.
Mercedes M104, M110, M111, M119, M120 C, E
Porsche 944 and 924. 
Some Toyota (Filter 08922 0211 etc...)
Can also be used on BMW Top of housing 1.9L M44
Super High Quality Original Factory Tool Made in Germany!
Clickhere to see a detailed Application ChartMeasure filter diameter canister diameter or Check yourmanuals for details and size needed.

Locking Pin , Plate , Holder , Pin Wrench 77.00

Set of four tools: VA6015 PLUS 2065A PLUS 2064 PLUS 12717

Locking Pin , Plate and Pin Wrench 38.00

Set of three tools including: 2065A Diesel Cam Shaft Locking Plate PLUS 2064 Locking Pin and 12717 Pin Wrench

Multi Function Oil Wrench 29.99

Double Sided Multi Oil WrenchOne Wrench contains 8 socket sizes from 12mm to 19mm.
Specially Designed to fit all common oil drain plugs
Innovative swivel design allows a technician to access and remove many common Oil Pan Drain Plugs. Swivel head allows full range of motion to access the most difficult oil plugs without creating a mess. Overall length of 10" allows for easy handling and access.

Oil Filter Wrench 74mm 16.99

Oil service Wrench 74mm with 14 Points (inside flats flutes).
(Check your manuals for details and size needed. Measure filter diameter or canister diameter).
This is an excellent deal. This Socket has (2) bonus screws for more strength if needed. 
The srews are kept in the holes at the top when not in use and can be used inserted into the side holes making the tool more effective. Other applications include: Mercedes, Audi, VW Golf, and new body Jetta, TDI (Diesel) and the following gas vehicles; Passat, Golf and Jetta with 1.8 turbo and 2.0 litre, Rabbit, Dasher, Scirocco, and New Beetle. Mercedes M104, M110, M111, M119, M120 C, E Porsche 944 and 924. (will not work on 911) Some Toyota (Filter 08922 0211 etc...) Can also be used on BMW Top of housing 1.9L M44ClickHere for More Applications

OPEN END WRENCH 0.00

OPEN END WRENCHUSED TO COUNTER HOLD SHOCK ABSORBER WHEN DISCONNECTING FROM WISHBONE.

You Searched for

32mm wrench

Trade Links With ZDMAK