22mm tool SARASOTA 22mm tool 32mm wrench -- mmk4mkt

22mm Single Open End 7.99

22mm Single Open End Wrench
High quality tool Made in Germany.
Picture is for reference only. See the chart for other available sizes.

22mm Lambda Tool 96.99

4681 1 Open Box Wrench 22mm chrome plated,
10 offset, with square connection 9 x 12 mm
for using with HAZET 6396,
For Lambda probe on VW AUDI, engine BMW M 70,
750i, 320, 325 M 20 engine, 316, 318 M 43 engine,
FORD Fiesta 1.1 and 1.6 l, Escort Orion 1.4 l

On Sale Crowsfoot Socket 22mm 14.99

ON SALE
22mm OXYGEN SENSOR SOCKET This is a Special 6 Point 22mm Crowsfoot Socket with 3/8 Drive Used for the removal and replacement of Oxygen Sensor that are situated within a confined area.
No need to snip the wires leading to the unit when all you want to do is check the sensor.Applicable: Many European Models.

On Sale 22mm Crowsfoot Socket 14.99

Two 22mm Sockets 34.99

Open Socket Plus Crowfoot Set
Both Tools are 22mm.
Details:
22mm (Open) TubeSocket (Number 4491A
1.) Used for securing the Strut tower retaining nut of most European models (crucial when adjusting tension of front shocks). The 2/3 open side walls of this socket allows for easy access of an adjusting wrench. (normally 7mm Allen Hex Wrench)2.) R&R of Oxygen Sensor.

Plus Oxygen Sensor Socket 4491b
This is a Special 22mm Crowsfoot Socket with 3/8 Drive
Used for the removal and replacement of Oxygen Sensors
situated within a confined area.
No need to snip the wires leading to the unit when all you want to do is check the sensor.
Applicable: Most European Models. Set of two tools.

Set 2 Sockets 22mm 34.99

Ball Joint Tool Set 69.50

Set of two tools
First tool (top of image) pictured is a Universal tool is used to separate the ball joint from the spindle support arm. It works on many domestic and import front wheel drive vehicles, and is adjustable for diffrent size ball joints. Using the correct ball joint tool makes a tough job much easier. Factory ball joints are pressed in tight, if you damage the ball joint, the situation gets ugly.Two Stage Ball joint tool Special steel, galvanized, for removing the ball pivots of steering arms, stabilizers etc.
Plus Universal Ball joint Puller (18 22mm opening), light series, galvanized Specifications Once the puller is positioned on the pin by adjusting the central screw, the joint is removed by turning the side screw. You get both tools with this purchase.

Ball Joint Puller 18 22mm 38.50

Universal (18 22mm opening) Ball joint Puller, light series, galvanizedSpecificationsOnce the puller is positioned on the pin by adjusting the central screw, the joint is removed by turning the side screw.

O2 Sensor Flex Wrench 47.99
Oxygen Sensor Flex Head Wrench
Features and Benefits:
22mm size covers 90 percent of all vehicles
Adjustable head allows for easy access to hard to reach places.
Slip the tool over the sensor without damage to wires.
Long handle provides extra torque.
TWB MK FHW02 22 Lifetime Warranty
read more:

SpecialOpen Socket 22mm 25.00

On Sale *
22mm Special TubeSocket
1.) Used for securing the Strut tower retaining nut of most European models (crucial when adjusting tension of front shocks). The 2/3 open side walls of this socket allows for easy access of an adjusting wrench. (normally 7mm Allen Hex Wrench)
2.) R&R of Oxygen Sensor.
Also for R&R of some Mercedes Diesel injectors ( OM604, 605 & 606).
Details: For removing and installing front strut unit on VW Golf up to 1988, Jetta up to 87, Scirocco, Audi 80 and Golf 3 from 1993 newer, Passat from 88 and newer, Audi 100, 200 Coupe and Quatro.
This tool is often used in conjunction with a 7mm hex wrench.
Clickhere for a picture of the tools in action:

Sockets plus Allen Set 3 38.99

Open Socket Plus Crowfoot Plus 7mm Allen
The Sockets are both 22mm.
Plus you get the long 7mm Allen Wrench
Details:
22mm (Open) TubeSocket (Number 4491A
1.) Used for securing the Strut tower retaining nut of most European models (crucial when adjusting tension of front shocks). The 2/3 open side walls of this socket allows for easy access of an adjusting wrench. (normally 7mm Allen Hex Wrench)2.) R&R of Oxygen Sensor.

Plus Oxygen Sensor Socket 4491b
This is a Special 22mm Crowsfoot Socket with 3/8 Drive
Used for the removal and replacement of Oxygen Sensors
situated within a confined area.
No need to snip the wires leading to the unit when all you want to do is check the sensor.
Applicable: Most European Models. Set of THREE tools.
Note: The Allen wrench is 7.5 inches long.

22mm Strut O/2 Sensor Socket 18.99

On Sale 22mm Special Tube Socket 1.) Used for securing the Strut tower retaining nut of most European models (crucial when adjusting tension of front shocks). The 2/3 open side walls of this socket allows for easy access of an adjusting wrench. (normally 7mm Allen Hex Wrench) 2.) R&R of Oxygen Sensor.
Also for R&R of some Mercedes Diesel injectors ( OM604, 605 & 606). Details: For removing and installing front strut unit on VW Golf up to 1988, Jetta up to 87, Scirocco, Audi 80 and Golf 3 from 1993 newer, Passat from 88 and newer, Audi 100, 200 Coupe and Quatro. This tool is often used in conjunction with a 7mm hex wrench.Clickhere for a picture of the tools in action:

Special Open Socket 22mm 25.00

Set 3424 Plus 3078 79.99

Set 2 TOOLS
Spreader Socket Number 3424This tool is used on all A4 platform VWs including Golf,Jetta, and Gti, 337, 20a.e. GTI model year 1999 to presentTool is used any time the strut needs to be separated from the wheel bearing housingMost common would be changing/replacing struts, coil spring, or the entire strut assemblyYou would also use this tool when servicing the wheel bearingWhy do you need to use it?? you can not easily remove the strut from the wheel bearing housing without itThe wheel bearing housing clamps down very tightly on the strut assembly....even with the bolt removed the housing is still firmly clamped to the strut...this tool allows you to spread the housing where it is clamped on so that the strut can be removed.Basically this tool is a must have any time the strut or wheel bearing housingneeds to be removed from the above models.
Plus 22mm Open Sidewall Socket number 3078
ANOTHER SUPERSET FROM ZDMAK!

22mm Socket plus 7mm Allen Wrench 26.99

2 Piece set
22mm Special Tube Socket 4491A plus 7mm Allen WrenchUsed for securing the Strut tower retaining nut of most European models(crucial when adjusting tension of front shocks). The 2/3 open side walls ofthis socket allows for easy access of an adjusting wrench. (normally 7mm Allen Hex Wrench) (This socket can also be used for R&R of Oxygen Sensor.)
Plus a 7mm Allen Wrench.The Allen wrench is 7mm and is 7.5 inches Long.

Square Socket Wrench 99.95

22mm Square Socket Wrench
High Quality Tool Made in Germany.
See chart for other available sizes.

Deep Offset Wrench Set 99.50

Deep Offset Box Wrench Set
8 Piece set sizes included:
6 x 7mm
8 x 9mm
10 x 11mm
12 x 13mm
14 x 15mm
16 x 17mm
18 x 19mm
20 x 22mm
12 point ring spanners. Satin chrome, made of high performance forged steel.
Polished head and ring. High Quality Tool Set Made in Germany!

Small Impact Hex Bits 00
Pictures not to scale *

Impact Hex Bits sizes 10 through 22mm.Available in drive size 16mm.

read more:

Large Impact Hex Bits 00
Large Hex Bits sizes 19 through 32mm.
Available in drive size 22mm.

read more:

22mm Socket 3/4 Drive 15.50

Big 3/4 inch Drive 22mm Socket 6 Point.
High Quality Tools
Made in Germany by Stahlwille!

Please note: some of the items in the Stahlwille section of this website are (non stock) special order. If you need to know immediate status on an item (or if you are unable to wait for a bckorder) please call or email before purchasing. If you do not see the size socket you are looking for contact Zdmak

Stahlwille sockets are made to exceed the standards of DIN 3124; they fit as tight as a glove and can withstand extreme torque loads.If you have never used German sockets on German fasteners, you will definitely notice a difference.No more sloshing around and rounding off heads of bolts. Stahlwille makes a wide variety of special tools that are ideal for working on German and other European automobiles, but they are equally useful for working on American and Japanese cars.

T.D.C. Tool 0.00
Top Dead Center Tool
Number 2588 1 Belt Changing Tool.
Should be used with 2588 2 and 2588 3. Call for more info.
High Quality Tool Made in Germany.
read more:

2 Piece Socket Set 32.99

22mm Special Tube Socket 4491A Plus Pin Wrench VW524
Used for securing the Strut tower retaining nut of most European models
(crucial when adjusting tension of front shocks). The 2/3 open side walls of
this socket allows for easy access of an adjusting wrench.
(normally 7mm Allen Hex Wrench)
Also for R&R of Oxygen Sensor.

VW524 Pin Wrench Socket with 1/2" drive. This tool is used for R&R of
grooved ring retaining nut on strut tower of front shock absorber.
Also used for adjusting power steering gear on VW Jetta, Golf, GTI.

Thin Wrench Made in Germany 13.50

20 x 22mm Thin Metric Wrench Made in Germany
Double Open Ended Spanner Super High Quality Tool
DIN 3110, ISO 10102 (metric size), Chrome Alloy Steel, chrome plated.
Stahlwille has a very distinctive design for its wrenches called the "I Beam" profile, because the wrenches look somewhat like I Beams that are used for construction. This unique design is ergonomic because it reduces the weight of the wrench by about 30%, it provides a thumb guide and the wrench is thickest on the outside surface where torque is applied.
It is hard to find a more comfortable, lighter or stronger wrench.

12 Pack Air Tool Oil 19.99
12 Pack Air Tool Oil.
Specially Formulated for use in all piston type and rotary air tools, as well as in line air lubricators. Prevents rust formation while providing positive lubrication for smooth starting and longer tool life. Assures maximum performance by dissolving gum and sludge that cut down tool speed and reduce power output. ( Marvel 12 Pack)
read more:

Large Impact Bits Torx 00
Large * Impact bits for Torx head screws 22mm drive.
Sizes available T80, T90 and T100.
read more:

Press tool 401 0.00
High Quality German Made
Volkswagen Press Tool for assembly work.
Original Factory Tool.
read more:

Volkswagen Door Tool 9.99

T10011Volkswagen Door Tool triple Square 4
This is the correct tool for the job
New Beetle Tool This tool is used for R & R of door handle screws.Applicable: 1998 & newer VW Golf, Jetta, Passat & New Beetle....possibly other VW Audi.
This tool is a high quality item you will like.

3 Piece Strut Set 34.99

On Sale! 22mm Tube Socket Plus Pin Wrench number VW524, Plus 7mm Allen Wrench
Tools used for securing the Strut tower retaining nut of most European models
(crucial when adjusting tension of front shocks). The 2/3 open side walls of
this socket allows for easy access of an adjusting wrench.
(normally 7mm Allen Hex Wrench)
Also for R&R of Oxygen Sensor.

VW524 Pin Wrench Socket with 1/2" drive. This tool is used for R&R of
grooved ring retaining nut on strut tower of front shock absorber.
Also used for adjusting power steering gear on VW Jetta, Golf, GTI.

3 total pieces in this set: 2 Sockets and 7mm Allen Wrench.
The Allen wrench is 7.5 inches long.

End Play Kit 00
This tool has isdesigned to measure the end play movement
of the VW crankshaft without the use of a dial indicator.
All that is necessary is a feeler gauge set and this tool.
With the tool bolted to the end of the case, the feeler guage
measures the gap created by the end play.
The taking of this end measurement is necessary whenever a VW engine is rebuilt
to prevent the rear main bearing from seizing up.
A must for rebuilding one engine or many,
this tool works on all air cooled VW engines and Porsche 912 & 914 models.
read more:

Special Crowsfoot Socket 22.50
OXYGEN SENSOR Socket 4491b This is a Special 22mm Crowsfoot Socket with 3/8 Drive Used for the removal and replacement of Oxygen Sensor that are situated within a confined area.No need to snip the wires leading to the unit when all you want to do is check the sensor.Applicable: Most European Models.
read more:

BMW Radio Tool 15.00

Very popular BMW Radio Removal Tool.
Pentagon shaped tool with 5 Sides.
The overall length of this tool is 3 5/8 inches.
Applicable: Most BMWs.
Including E38 E39 7 Series etc...
This tool is used to release anti theft radio mounts.

7 Way Crimping Tool 8.99
7 WAY CRIMPING TOOL
Wire cutter, terminal crimper & wire stripper in one handy tool
Black anodized finish with insulated hand grips
Crimp slot on end of tool secures most ignition terminals including "W" type, right angle and "High Tower" terminals
Crimps 7mm to 8.5mm ignition wire
Works with 10 22 gauge solderless terminals
read more:

Klein Tool Bag 94.50
Klein Tool Bag
Number 5002 20
20" Tool Bag, No. 8 natural canvas with vinyl 20" (51 cm) 6" (15 cm) 15" (38 cm)

Klein offers a full line of Tool Bags. With the addition of two 20" bags you can now carry more tools and products. The 5003 series has shoulder strap mounts for use with the new shoulder strap. The canvas tool line has tool bags in lengths of 16" (8 interior pockets), 18" (10 interior pockets) and the new 20" (14 interior pockets) with choices in either leather or vinyl bottoms. Now carry all of your tools the most convenient way for you!
read more:

German Deep Offset Wrench Set 99.50
Deep Offset Box Wrench Set
High Quality 8 Piece Set Made in Germany!
Sizes included:
6 x 7mm
8 x 9mm
10 x 11mm
12 x 13mm
14 x 15mm
16 x 17mm
18 x 19mm
20 x 22mm
12 point ring spanners.
Satin chrome, made of high performance forged steel.
Polished head and ring.
Comes in a plastic roll up pouch.
read more:

Socket & Allen Wrench 34.99
2 Piece set 22mm Special Tube Socket 4491A plus 7mm Allen Wrench Used for securing the Strut tower retaining nut of most European models (crucial when adjusting tension of front shocks). The 2/3 open side walls of this socket allows for easy access of an adjusting wrench This socket can also be used for R&R of Oxygen Sensor. Plus You get an Angled 7mm Allen Wrench with handle.
read more:

Klein Tool Bag 89.99
Klein Tool Bag
Number 5003 16
16" Tool Bag, No. 8 natural canvas with leather 16" (41 cm) 6" (15 cm) 14" (36 cm)

Klein offers a full line of Tool Bags. With the addition of two 20" bags you can now carry more tools and products. The 5003 series has shoulder strap mounts for use with the new shoulder strap. The canvas tool line has tool bags in lengths of 16" (8 interior pockets), 18" (10 interior pockets) and the new 20" (14 interior pockets) with choices in either leather or vinyl bottoms. Now carry all of your tools the most convenient way for you!
read more:

Spark Plug Boot Tool 32.99
Spark Plug Boot Tool
Due to restricted space the T10029 will install the spark plug boot properly.
VW and Audi spark plug boots designed to seal and increase contact between the spark plug and spark plug wire.
With the increased seal and location of the boot,
this tool has been made to access and remove the spark plug boot.
Tool is approximately 10 inches (250mm) long.
Used to pull off the spark plug socket...SOME APPLICATIONS INCLUDE: 2.8 2.9L VR6 engines
VW Golf, Corrado and Passat.Also Audi 80, 100, A4, A6 with 2.6 and 2.8L V6 engines.
This is the correct tool for the job.You will most likely find OLD number 3277 or 3277A in your manuals but
T10029 is the CORRECT current Volkswagen Audi Tool number. 3277 is and old number and Volkswagen calls this a SPARK PLUG CONNECTOR TOOL.
read more:

7 in 1 Tool 8.50
7 in 1 TOOL
Includes Wire looper, steel wire cutter,
copper wire cutter, wire stripper,
crimping tool, hose clamp plier and inch/metric scale!
read more:

Valve Spring Tool & Bridge 142.50

Valve Tools (2)
Set including:Valve Spring Compressor Bar
Same as Volkswagen Tool Number VW 541/1
Used for R&R of valve spring or rocker armWith this tool the job can be done with the cylinder head on or off the car.Used in conjunction with tool BridgeApplicable: 924 / 944 VW AUDI 4 5 Cyl. VA6022Support Bridge Same as VW Tool 2036 Used for R&R of valve spring or rocker armUsed in conjunction with tool VW541/1Applicable: Model 924. VW / AUDI 4 5 Cyl.

Valve Spring Tool and Bridge 142.50

Valve Spring Tools Set including:VA6010Valve Spring Compressor BarSame as Volkswagen Tool Number VW 541/1Used for R&R of valve spring or rocker armWith this tool the job can be done with the cylinder head on or off the car.Used in conjunction with tool BridgeApplicable: 924 / 944 VW AUDI 4 5 Cyl. VA6022Support Bridge Same as VW Tool 2036 Used for R&R of valve spring or rocker armUsed in conjunction with tool VW541/1Applicable: Model 924. VW / AUDI 4 5 Cyl.

12 Pack 32 oz Air Tool Oil 64.99
32 oz 12 Pack MVL085
Specially Formulated for use in all piston type and rotary air tools, as well as in line air lubricators. Prevents rust formation while providing positive lubrication for smooth starting and longer tool life. Assures maximum performance by dissolving gum and sludge that cut down tool speed and reduce power output. ( Marvel 12 Pack)
read more:

BMW Center Cap Tool 8.99

BMW Center Cap Tool.Made in Germany
Tool used to remove and install center caps on several BMW.
Drive size is 17mm
Tool is 3 7/16 inch wide.
BMW NUMBER 36 13 1 180 626

Stubby 3/8 X 1/2 Ratchet 23.99
Short Pattern Double Drive 3/8 X 1/2
Flexible Head "Stubby" Ratchet
Comfortable rubber cushion grip handle Features 72 gear teeth for speed & durability Chrome vanadium steel construction.
Saves space in the tool pouch or tool box,
saves time looking for a tool
and saves money!
read more:

3 pc. Fold Up Tool Set 45.99

3 pc. Fold Up Tool Set
3 fold up tools all made of high alloy CVM steel, hardened, with a molded ergonomic handle. 7 tool PocketStar: Torx sizes: T7, T8, T9, T10, T15, T20, T25. 7 tool MagicRing Metric PocketStar: 2, 2.5, 3, 4, 5, 6 and 8mm. 9 tool MagicRing Inch PocketStar: sizes 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4 in
Satisfaction Guaranteed Made In Germany!

VW803 19.99
Sorry No Picture
FACTORY TOOL
In Stock Now!
Call if you need more info on this tool.
read more:

VW801 49.99

Sorry No Picture

FACTORY TOOL MADE IN GERMANY

In Stock Now!
Call if you need more info on this tool.
read more:

VW276 49.99

Sorry No Picture

FACTORY TOOL MADE IN GERMANY

In Stock Now!
Call if you need more info on this tool.
read more:

VW273A 125.00

Sorry No Picture

FACTORY TOOL MADE IN GERMANY

In Stock Now!
Call if you need more info on this tool.
read more:

VW243 39.99

Sorry No Picture

FACTORY TOOL MADE IN GERMANY

In Stock Now!
Call if you need more info on this tool.
read more:

Power Lifter Pickup Tool 18.50
Pick up Tool 19 inch long with lift cap 1.5lbs.
read more:

You Searched for

22mm tool

Trade Links With ZDMAK